Dergiler / Natural and Engineering Sciences / 2021 / Cilt: 6 - Sayı: 3

Effect of Two Types of Fly Ash on Rheological and Filtration Properties of Water-Based Drilling Mud

Sayfa
223–236
Yayın Tarihi
2021-12-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Through this study, it was reveal that class F fly ash is a promising additive to improve the filtration characteristics of bentonite based drilling fluids, thereby contributing to reducing formation damage caused by drilling mud.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the usage of class F fly ash (brown coal) and class C fly ash (lignite) with increasing concentration in water based mud mainly composed of bentonite dispersion was investigated at ambient conditions.
📊
Temel Bulgular & Veri:Experimental results indicate that efficiency of the mud is significantly controlled by type of the fly ash tested and its concentrations.
💡
Sonuç & Katkı:Through this study, it was reveal that class F fly ash is a promising additive to improve the filtration characteristics of bentonite based drilling fluids, thereby contributing to reducing formation damage caused by drilling mud.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Bentonite · drilling fluid · fly ash

Abstract

In this study, the usage of class F fly ash (brown coal) and class C fly ash (lignite) with increasing concentration in water based mud mainly composed of bentonite dispersion was investigated at ambient conditions. Experimental results indicate that efficiency of the mud is significantly controlled by type of the fly ash tested and its concentrations. The results show that Class F fly ash enhanced filtration properties (filtrate loss and mud cake) of the mud and have no effect on the rheology including, yield point, viscosity whereas the class C fly ash increased the rheology parameters and degraded water loss into the formation and filer cake thickness dramatically. This study showed that class F fly ash displays superior performance than class C fly ash. Through this study, it was reveal that class F fly ash is a promising additive to improve the filtration characteristics of bentonite based drilling fluids, thereby contributing to reducing formation damage caused by drilling mud.

🔖

Bu Makaleye Atıf Yap

YALMAN, E., FEDERER-KOVACS, G., DEPCİ, T. (2021). Effect of Two Types of Fly Ash on Rheological and Filtration Properties of Water-Based Drilling Mud. Natural and Engineering Sciences, Cilt: 6 - Sayı: 3, 223–236. https://ajindex.com/articles/793142

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Agwu, O. E., Akpabio, J. U., & Archibong, G. W. (2019). Rice husk and saw dust as filter loss control agents for water-based muds. Heliyon, 5(7), e02059. https://doi.org/10.1016/j.heliyon.2019.e02059.
  2. Amani, M., M. Al-Jubouri & A. Shadravan. (2012). Comparative study of using oil-based mud versus water-based mud in HPHT fields. Advances in Petroleum Exploration and Development, 4(2), 18-27. http://dx.doi.org/10.3968/j.aped.1925543820120402.987.
  3. Aramendiz, J., A. Imqam & S. M. Fakher. 2019. Design and Evaluation of a Water-Based Drilling Fluid Formulation Using SiO and Graphene Oxide Nanoparticles for Unconventional Shales. International Petroleum Technology Conference. Avci, E., T. Szabo, G. Federer. (2019). The rheological performance of fly ash in inhibitive water-based drilling fluids. Petroleum & Coal, 61(6), 1307-1313.
  4. Bakare, M. D., R. R. Pai, S. Patel, & J. T. Shahu. (2019). Environmental Sustainability by Bulk Utilization of Fly Ash and GBFS as Road Subbase Materials. Journal of Hazardous, Toxic, and Radioactive Waste, 23(4), 04019011. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000450.
  5. Benyounes, K., A. Mellak, & A. Benchabane. (2010). The effect of carboxymethylcellulose and xanthan on the rheology of bentonite suspensions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 32(17), 1634-1643. https://doi.org/10.1080/15567030902842244.
  6. Bhatt, A., S. Priyadarshini, A. A. Mohanakrishnan, A. Abri, M. Sattler, & S. Techapaphawit. (2019). Physical, chemical, and geotechnical properties of coal fly ash: A global review. Case Studies in Construction Materials, 11, e00263. https://doi.org/10.1016/j.cscm.2019.e00263.
  7. Caenn, R., H. C. Darley, & G. R. Gray. (2011). Composition and properties of drilling and completion fluids. 6 th ed. USA. Gulf professional publishing. Dias, F. T. G., R. R. Souza & E. F. Lucas. (2015). Influence of modified starches composition on their performance as fluid loss additives in invert-emulsion drilling fluids. Fuel, 140, 711-716. https://doi.org/10.1016/j.fuel.2014.09.074.
  8. Fliss, M. C., T. Szabo, & E. Avci. (2019). Effect of micro-sized fly ash on the rheological and filtration properties of water-based muds. Petroleum & Coal, 61(6), 1361-1364.
  9. Hasan, M. L., N. A. Z. Abidin & A. Singh. (2018). The rheological performance of guar gum and castor oil as additives in water-based drilling fluid. Materials Today: Proceedings, 5(10), 21810-21817. https://doi.org/10.1016/j.matpr.2018.07.036.
  10. Herath, C., C. Gunase