Dergiler / Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2019 / Cilt: 10 - Sayı: 2

Çimento Esaslı Odun Kompozit Malzemelerin Üretim Prosesi ve Özellikleri Üzerine Bir Çalışma

A Study on the Production Process and Properties of Cement-Based Wood Composite Materials

Sayfa
219–228
Yayın Tarihi
2019-12-20
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Birçok araştırmacı tarafından çimento-esaslı kompozit malzemelerin üzerine çalışmalar yapılmış ve bulgular rapor edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Çevre ve doğayı korumaya olan ilginin giderek artması sonucu, lignoselüloik esaslı kaynakların kompozit malzemelerin yapısında güçlendirici eleman olarak kullanımına olan ilginin artmasına neden olmuştur.
📊
Temel Bulgular & Veri:Birçok önemli ve değerli bilgiler bu çalışmalardan sağlanabilir.
💡
Sonuç & Katkı:Birçok araştırmacı tarafından çimento-esaslı kompozit malzemelerin üzerine çalışmalar yapılmış ve bulgular rapor edilmiştir.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Çimento · odun · kompozitler

Özet

Çevre ve doğayı korumaya olan ilginin giderek artması sonucu, lignoselüloik esaslı kaynakların kompozit malzemelerin yapısında güçlendirici eleman olarak kullanımına olan ilginin artmasına neden olmuştur. Zira bu doğal kaynaklar, daha düşük maliyetlidirler ve yeterli direnç özelliklerin sahiptirler. Çimento ile yapıştırılmış odun esaslı kompozit malzemelerde tipik olarak çimento ile odun veya türevleri (talaş, yonga, lif vb.) mineral matris yapıda çimento ile bağ yaparak çimentonun bağlayıcılığında bir arada bulunurlar. Bu malzemeler, kolay üretime imkan sağlamaları yanında gelişmiş biyobozunma sağlamaları ve sürdürülebilir kaynaklardan üretilmelerinden dolayı yapı ve konstrüksiyon işleri için uygundurlar. Odun-çimento esaslı kompozit malzemeler, sentetik reçine ile üretilmiş kompozitlere göre daha yüksek yangına, dış atmosferik şartlara ve biyolojik bozunmalara dayanım gösterirler. Günümüzde, çimento esaslı kompozitler çok sayıda literatür bilgileri mevcuttur. Birçok araştırmacı tarafından çimento-esaslı kompozit malzemelerin üzerine çalışmalar yapılmış ve bulgular rapor edilmiştir. Birçok önemli ve değerli bilgiler bu çalışmalardan sağlanabilir. Farklı odun türleri için dünyanın bazı bölgelerinde karşılaştırmalı çalışmalar yapılmış ve çimentolu üretime uygunlukları uygunluğu konusunda bazı öneriler bulunmaktadır.

Abstract

Due to the growing environmental concern, lignocellulosic materials have become a common substitute for the conventional reinforcement element in composite strcutures. However, these natural sources are preferred to cost efficient and to increase mechanical performances. In a cement bonded composites, wood is incorporated as an aggregate in the mineral matrix (as fibres, sawdust, shavings or particles), and cement acts as a binder. These are employed due to their ease of production, and the enhanced biodegradability, leading to applications for sustainable purposes in construction applications. Wood-cement composites are considerably better performance on high fire, weathering and bio-deterioration risk applications to which solid wood and resin bonded composites are vulnerable. However, the vast of literature on cement-wood bonded composites has already been reviewed and pointed by a number of researchers. Many valuable fundamental informations have already established for utilizing wood for these products. A comprehensive results was to investigate some wood species that are abundant resources in many countries, for their suitability for manufacturing such composites.

🔖

Bu Makaleye Atıf Yap

ŞAHİN, H. T., KAYA, A. İ., YALÇIN, Ö. Ü., KILINÇARSLAN, Ş., ŞİMŞEK, Y., MANTANİS, G. İ. (2019). Çimento Esaslı Odun Kompozit Malzemelerin Üretim Prosesi ve Özellikleri Üzerine Bir Çalışma. Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 10 - Sayı: 2, 219–228. https://ajindex.com/articles/790187

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. Antona, B. and Johanson, R. (2011). Crack control of concrete structures subjected to restraint forces, influence of fibre reinforcement, Msc. Thesis, Chalmers University of Technology, Göteborg, Sweden. ASTM C150 / C150M-18. (2018). Standard specification for Portland cement, ASTM International, West Conshohocken, PA. Ashori, A., Tabarsa, T., & Sepahvand, S. (2011). Cement-bonded composite boards made from poplar strands, Construction and Building Materials, 26(1): 131-134.
  2. Boothby, T.E., Borroughs, C.B., Bernecker, C.A., Manbeck, H.B., Ritter, M.A., Grgurevich, S., Cegelka, S. and Lee, P.D. (2001). Design of wood highway sound barriers, USDA Forest Service, FPL- Research Paper-596.Madison, WI. Buchmayer, K. (1999). Plant layout and start-up off fiber cement manufacturing plants, In: Inorganic-Bonded Wood and Fiber Composite Materials, A.A. Moslemi (Ed), University of Idaho, Moscow, ID, pp.99–140.
  3. Coutts, R.S.P. and Kightly, P. (1984). Bonding in wood fibre-cement composites. Journal ofMaterialsScience 19(10): 3355-3359. Doudart de la Grée, G.C.H., Yu, Q.L. and Brouwers, H.J.H. (2014). Wood-wool cement board: optimized inorganic coating, Proceedings of the 14’th International Inorganic-Bonded Fiber Composites Conference (IIBCC), 15-19 September 2014,
  4. Da Nang, Vietnam, pp. 154-164. Doudart de la Grée, G.C.H., Yu, Q.L. and Brouwers, H.J.H. (2015a). Assessing the effect of CaSO4 content on the hydration kinetics, microstructure and mechanical properties of cements containing sugars, Construction and Building Materials,143: 48-60. Doudart de la Grée, G.C.H., Yu, Q.L. and Brouwers, H.J.H. (2015b). The effect of glucose on the hydration kinetics of ordinary Portland cement, in: 1’st Interntional Conf. Biobased Build. Mater., Clermont-Ferrand, France, pp. 1–6.
  5. Fan, M. (1997). Dimensional instability of cement bonded particleboard. PhD Thesis. University of Wales, UK. Fan, M., Dinwoodie, J.M., Bonfield, P.W., Breese, M.C. (1999). Dimensional instability of cement-bonded particleboard: behavior of cement paste and its contribution to the composite. Wood Fibre Science, 31(3):306–318.
  6. Fan, M., Bonfield, P. and Dinwoodie, J. (2006). Nature and behaviour of cement bonded particleboard: structure, physical property and movement, Journal of Material Science, 41(17): 5666–5678.
  7. Fan, M., Ndikontar, M. K., Zhou, X. and Ngamveng, J. N. (2012). Cement-bonded composites made from tropical woods: Compatibility of wood and cement. Construction and Building Materials,36, 135–140