Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightMorphological measurements of the solid biomass residues left after hydrolysis showed substantial degradations with increasing number of pores on the biomass surfaces.
📌 3 Maddede Bu Makale
Abstract
Kenaf biomass material was hydrolyzed in subcritical water condition in presence of various organic solvents. The solvents tested were tetrahydrofurane (THF), acetone, xylene and methanol. The organic compounds released into hydrolysates, total organic contents, water soluble total phenol and the molecular weight distributions of the polysaccharides in the hydrolysates, solid residues leftover after hydrolysis and gaseous products formed during the solubilization process were determined. The results showed that organic solvents significantly enhanced the dissolution of kenaf biomass (methanol < xylene ≤ acetone ~ tetrahydrofurane). The hydrolysis percentage was found to be between 75-82% depending on the type of the solvent. Hydrolysis yield and total organic carbons released into hydrolysates highly differed when the solubilization process was performed under carbondioxide pressure and this effect considerably varied based on the type of solvent used in hydrolysis process. The main gas product formed during hydrolysis process was carbon dioxide with ~80% composition. Morphological measurements of the solid biomass residues left after hydrolysis showed substantial degradations with increasing number of pores on the biomass surfaces.