KaydedilenlerDerginizi ekleyin

Dergiler / Journal of Anatolian Environmental and Animal Sciences / 2019 / Cilt: 4 - Sayı: 4

The Effect of Vermiculite Usage on Surface Properties of Medium Density Fibreboard

Abdullah İSTEK
İsmail ÖZLÜSOYLU
Ahmet CAN
Saadettin Murat ONAT
Sayfa
607–612
Yayın Tarihi
2019-12-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In short, the use of vermiculite in the production of MDF negatively affects the surface roughness and discoloration of the boards, but it has been found to positively affect the gloss

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the effects of vermiculite of volcanic minerals usage on the surface properties were investigated in medium density fiberboard (MDF) production.
📊
Temel Bulgular & Veri:The test boards were produced using the dry method with 12% urea formaldehyde resin.
💡
Sonuç & Katkı:In short, the use of vermiculite in the production of MDF negatively affects the surface roughness and discoloration of the boards, but it has been found to positively affect the gloss
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Color · Gloss · MDF

Abstract

In this study, the effects of vermiculite of volcanic minerals usage on the surface properties were investigated in medium density fiberboard (MDF) production. The test boards were produced using the dry method with 12% urea formaldehyde resin. Additions of 10%, 15%, 20% and 30% vermiculite were used based on the full dry fiber weight. Surface roughness, color and gloss values of both surfaces of the obtained boards were determined. Based on the results, the ratio of vermiculite increased, roughness values on the surfaces increased. The roughness values in the bottom surface of the produced boards were determined to be higher than the top surface. With the use of 30% vermiculite, the average minimum surface roughness (Ra) was found to be 8.65 μm on the upper surfaces and 15.44 μm on the lower surfaces. It has been found that total color change and brightness are improved by the increase of vermiculite usage and the color change on the bottom surface is found higher. In short, the use of vermiculite in the production of MDF negatively affects the surface roughness and discoloration of the boards, but it has been found to positively affect the gloss

🔖

Bu Makaleye Atıf Yap

İSTEK, A., ÖZLÜSOYLU, İ., CAN, A., ONAT, S. M. (2019). The Effect of Vermiculite Usage on Surface Properties of Medium Density Fibreboard. Journal of Anatolian Environmental and Animal Sciences, Cilt: 4 - Sayı: 4, 607–612. https://ajindex.com/articles/773700

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Aksogan, O., Resatoglu, R. and Binici, H. (2018). An Environment Friendly New Insulation Material Involving Waste Newsprint Papers Reinforced by Cane Stalks. Journal of Building Engineering, 15, 33-40. https://doi.org/10.1016/j.jobe.2017.10.011
  2. Atar M (2006). Melamin Reçineli Kağıtla Kaplanmış Yonga Levhanın Çeşitli Malzeme ve Tutkallarla Yüz Yüze Yapışma Direnci. Politeknik Dergisi, 9(4), 319-324.
  3. Ayrilmis, N., Korkut, S., Tanritanir, E., Winandy, J.E., Hiziroglu, S., (2006). Effect of various fire retardants on surface roughness of plywood. J. Build. Environ. 41 (7), 887–892. https://doi.org/10.1016/j.buildenv.2005.04.011
  4. Ayrilmis, N. (2007). Effect of Fire Retardants on Internal Bond Strength and Bond Durability of Structural Fiberboard.” Building and Environment, 42(3), 1200-1206. https://doi.org/10.1016/j.buildenv.2005.11.017
  5. Ayrilmis, N., Candan, Z., and White, R. (2007).
  6. Physical, Mechanical, and Fire Properties of Oriented Strandboard with Fire Retardant Treated Veneers. Holz als Roh-und Werkstoff, 65(6), 449-458. 10.1007/s00107-007-0195-3
  7. Ayrilmis, N., Kartal, S. N., Laufenberg, T. L., Winandy, J. E. and White, R. H. (2005). Physical and Mechanical Properties and Fire, Decay, and Termite Resistance of Treated Oriented Strand Board. Forest Products Journal. 55(5), 74–81.
  8. Binici, H. (2016).
  9. Atık Mukavva, Alçı, Pomza, Perlit, Vermikülit ve Zeolit ile Yapılan Kompozitlerin Yangın Direncinin Araştırılması. Çukurova Üniversitesi MühendislikMimarlıkFakültesiDergisi,31(1),1-10. https://doi.org/10.21605/cukurovaummfd.317714
  10. Binici, H., Sevinç, A. H., Mustafa, E. and Velit, E. (2015). Atık Gazete Kağıdından Yalıtım Malzemesi Üretimi. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 30(2), 13-24. https://doi.org/10.21605/cukurovaummfd.242772
  11. Burdurlu, E., Usta, İ., Ulupınar, M., Aksu, B. and Erarslan, T.Ç. (2005). The Effect of the Number of Blades and the Grain Size of Abrasives in Planing and Sanding on the Surface Roughness of European Black Pine and Lombardy Poplar. Turk J Agric. 29 (1), 315-321.
  12. Crawford, R., Smalley, M. V., & Thomas, R. K. (1990). Swelling of N-Butylammonium Vermiculite in Water. Clays and Clay Minerals, 38(1), 90-96.
  13. Dix, B. (1997). Influence of Heardwood and The Age of Tree on The Properties of Particleboards from Pine (Pinus sylvestris). Part 2: Physical–Technical Properties and Formaldehyde Release of Particleboards Made from Sapwood and Heardwood of Pine. Holz als Roh-und Werkstoff, 55 (2), 103–109.
  14. Dündar, T., As, N.