KaydedilenlerDerginizi ekleyin

Dergiler / International Scientific and Vocational Studies Journal / 2021 / Cilt: 5 - Sayı: 1

Investigation of Mechanical Properties of Gadalanium (Gd) Added High Temperature Superconductor BSCCO

Cem EMEKSİZ
Uğur KÖLEMEN
Fikret YILMAZ
Sayfa
62–75
Yayın Tarihi
2021-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, Modified PSR model was found to be the most effective one for microhardness determination of BSCCO superconductor.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Mechanical properties of BSCCO superconductor prepared by using the meltquenching method were investigated by dynamic microindentation technique.
📊
Temel Bulgular & Veri:The indentation load-displacement curves of the BSCCO sample were drawn by different peak load levels ranging from 200 mN to 1800 mN.
💡
Sonuç & Katkı:As a result, Modified PSR model was found to be the most effective one for microhardness determination of BSCCO superconductor.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Superconductors · Mechanical properties · Indentation Size Effect (ISE)

Özet

Mechanical properties of BSCCO superconductor prepared by using the meltquenching method were investigated by dynamic microindentation technique. The indentation load-displacement curves of the BSCCO sample were drawn by different peak load levels ranging from 200 mN to 1800 mN. Microhardness values were calculated from loading–unloading curves. The results showed that the hardness values exhibited peak load dependent (i.e., indentation size effect; ISE) behaviour on BSCCO superconductors. That behaviour was analyzed by the Hays-Kendall approach, the Proportional Specimen Resistance model (PSR), and the Modified PSR models. As a result, Modified PSR model was found to be the most effective one for microhardness determination of BSCCO superconductor.

Abstract

Mechanical properties of BSCCO superconductor prepared by using the meltquenching method were investigated by dynamic microindentation technique. The indentation load-displacement curves of the BSCCO sample were drawn by different peak load levels ranging from 200 mN to 1800 mN. Microhardness values were calculated from loading–unloading curves. The results showed that the hardness values exhibited peak load dependent (i.e., indentation size effect; ISE) behaviour on BSCCO superconductors. That behaviour was analyzed by the Hays-Kendall approach, the Proportional Specimen Resistance model (PSR), and the Modified PSR models. As a result, Modified PSR model was found to be the most effective one for microhardness determination of BSCCO superconductor.

🔖

Bu Makaleye Atıf Yap

EMEKSİZ, C., KÖLEMEN, U., YILMAZ, F. (2021). Investigation of Mechanical Properties of Gadalanium (Gd) Added High Temperature Superconductor BSCCO. International Scientific and Vocational Studies Journal, Cilt: 5 - Sayı: 1, 62–75. https://ajindex.com/articles/769784

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. A.T. Ulgen, T. Turgay, C. Terzioglu, G. Yildirim and M. Oz, “Role of Bi/Tm substitution in Bi-2212 system on crystal structure quality,” Pair wave function and polaronic states, vol.764, pp.755–766, 2018
  2. A. Costa, F.M., N.M. Ferreira, S. Rasekh, A.J.S. Fernandes, M.A. Torres, M.A. Madre and J.C. Diez, Sotelo, “Very large superconducting currents induced by growth tailoring,” Cryst. Growth Des. vol.15, pp.2094–2101, 2015
  3. B. Wang, Y. Ren, Z. Deng, J. Zheng, W. Zhang, J. Zhang and X. Zheng, “A high-temperature superconducting maglev-evacuated tube transport (HTS maglev-ETT) test system,” IEEE Trans. Appl. Supercond. vol.27, pp.1–8, 2017
  4. H. Wang, J. Zhang, X. Niu, B. Tian, H. Hui and Y. Xin, “Electrical insulation of HTS coils in saturated iron core superconducting fault current limiter,” IEEE Trans. Appl. Supercond. vol.24, pp.1–4, 2014
  5. R.S. Dondapati, A. Kumar, G.R. Kumar, P.R. Usurumarti and S. Dondapati, “Superconducting magnetic energy storage (SMES) devices integrated with resistive type superconducting fault current limiter (SFCL) for fast recovery time,” J. Energy Storage. vol.13, pp.287–295, 2017
  6. G. Yildirim, “Determination of optimum diffusion annealing temperature for Au surface-layered Bi-2212 ceramics and dependence of transition temperatures on disorders,” J. Alloy. Comp. vol.699, pp.247–255, 2017
  7. Y. Zalaoglu, F. Karaboga, C. Terzioglu and G. Yildirim, “Improvement of mechanical performances and characteristics of bulk Bi-2212 materials exposed to Au diffusion and stabilization of durable tetragonal phase by Au,” Ceram. Int. 0–1, 2017,
  8. S. Safran, H. Ozturk, F. Bulut and O. Ozturk, “The influence of re-pelletization and heat treatment on physical, superconducting, magnetic and micro-mechanical properties of bulk BSCCO samples prepared by ammonium nitrate precipitation method,” Ceram. Int. 1–7, 2017,
  9. N. Hudakova, V. Plechacek, P. Dordor, K. Flachbart, K. Knizek, J. Kovac et al., “Influence of PB concentration onmicrostructural and superconducting properties of BSCCOsuperconductors,” Supercond Sci Technol, vol.8 no.5, p.324, 1995
  10. C.S. Lim, L. Wang, C.K. Chua, Z. Sofer, O. Jankovsk´y and M. Pumera, “High temperature superconducting materials asbi-functional catalysts for hydrogen evolution and oxygenreduction,” J Mater Chem A, vol.3, no.16, p.8346, 2015
  11. H. Maeda, Y. Tanaka, M. Fukutomi and T. Asano, “