Dergiler / International Journal of Engineering and Applied Sciences / 2017 / Cilt: 9 - Sayı: 3

Effects of Inhomogeneity and Thickness Parameters on the Elastic Response of a Pressurized Hyperbolic Annulus/Disc Made of Functionally Graded Material

Sayfa
36–50
Yayın Tarihi
2017-10-03
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

To reach a final decision, analytical formulas such as those used in the present study together with a failure criteria such as Von Mises and Tresca become indispensable means in a design process.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:A broad parametric study is carried out to investigate the effects of both the inhomogeneity parameter, and a profile index of Stodola’s hyperbolic function on the static response of such structures subjected to both the inner and outer pressures.
📊
Temel Bulgular & Veri:The effects of those parameters on the variation of the radial displacement, the radial and hoop stresses are all graphically illustrated for an annulus pressurized at its both surfaces.
💡
Sonuç & Katkı:To reach a final decision, analytical formulas such as those used in the present study together with a failure criteria such as Von Mises and Tresca become indispensable means in a design process.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:functionally graded · Pressurized disc · hyperbolic annulus

Abstract

A broad parametric study is carried out to investigate the effects of both the inhomogeneity parameter, and a profile index of Stodola’s hyperbolic function on the static response of such structures subjected to both the inner and outer pressures. The investigation is based on the analytical formulas lately published by the author. The effects of those parameters on the variation of the radial displacement, the radial and hoop stresses are all graphically illustrated for an annulus pressurized at its both surfaces. It is observed that, especially, the variation of the hoop stress in radial coordinate is closely sensible to variation of those parameters. For the chosen problems it was observed that one of two materials whose Young’s modulus is higher than the other is better to locate at the inner surface of the disc having divergent profile to get reasonable maximum hoop stresses. However much smaller radial displacements may be obtained by using positive inhomogeneity indexes for all discs whose surfaces host a material whose Young’s modulus is smaller than the other. To reach a final decision, analytical formulas such as those used in the present study together with a failure criteria such as Von Mises and Tresca become indispensable means in a design process.

🔖

Bu Makaleye Atıf Yap

YILDIRIM, V. (2017). Effects of Inhomogeneity and Thickness Parameters on the Elastic Response of a Pressurized Hyperbolic Annulus/Disc Made of Functionally Graded Material. International Journal of Engineering and Applied Sciences, Cilt: 9 - Sayı: 3, 36–50. https://ajindex.com/articles/766653

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Horgan, C., Chan, A., The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials. Journal of Elasticity, 55, 43-59, 1999
  2. Horgan, C., Chan, A., The stress response of functionally graded isotropic linearly elastic rotating disks. Journal of Elasticity, 55, 219-230, 1999b
  3. Bayat, M., Saleem, M., Sahari, B., Hamouda, A., Mahdi, E., Analysis of functionally graded rotating disks with variable thickness. Mechanics Research Communications, 35, 283-309, 2008
  4. Yıldırım, V., Analytic solutions to power-law graded hyperbolic rotating discs subjected to different boundary conditions. International Journal of Engineering & Applied Sciences (IJEAS), 8/1, 138-52, 2016
  5. Çallıoğlu, H., Bektaş, N.B., Sayer, M., Stress analysis of functionally graded rotating discs: analytical and numerical solutions. Acta Mechanica Sinica, 27, 950-955, 2011
  6. Nejad, M.Z., Abedi, M., Lotfian, M.H., Ghannad, M., Elastic analysis of exponential FGM disks subjected to internal and external pressure. Central European Journal of Engineering, 3, 459-465, 2013
  7. Nejad, M.Z., Rastgoo, A., Hadi, A., Exact elasto-plastic analysis of rotating disks made of functionally graded materials. International Journal of Engineering Science, 85, 47-57, 2014
  8. You, L.H., Wang, J.X., Tang, B.P., Deformations and stresses in annular disks made of functionally graded materials subjected to internal and/or external pressure. Meccanica, 44, 283-292, 2009
  9. Zenkour, A.M., Analytical solutions for rotating exponentially-graded annular disks with various boundary conditions. International Journal of Structural Stability and Dynamics, 5, 557-577, 2005
  10. Zenkour, A.M., Elastic deformation of the rotating functionally graded annular disk with rigid casing. Journal of Materials Science, 42, 9717-9724, 2007
  11. Zenkour, A.M., Stress distribution in rotating composite structures of functionally graded solid disks. Journal of Materials Processing Technology, 209, 3511-3517, 2009
  12. Zenkour, A.M., Mashat, D.S., Stress function of a rotating variable-thickness annular disk using exact and numerical methods. Engineering, 3, 422-430, 2011
  13. Eraslan, A.N., Akiş, T., On the plane strain and plane stress solutions of functionally graded rotating solid shaft and solid disk problems. Acta Mechanica, 181/(1–2), 43–63, 2006
  14. Khorshidv, A.R., Khalili, S.M.R., A new analytical solution for deformation and stresses in functionally graded rot