Obtained results emphasized that both parameters highly influence the distributions of stress, displacement and commencement of the yielding.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, rotating long thick-walled fiber reinforced composite cylinders with closed ends are investigated within the elastic limits by using analytical methods.
📊
Temel Bulgular & Veri:Hoffman yield criteria is employed to the elastic problem to find limit angular velocities.
💡
Sonuç & Katkı:Obtained results emphasized that both parameters highly influence the distributions of stress, displacement and commencement of the yielding.
In this study, rotating long thick-walled fiber reinforced composite cylinders with closed ends are investigated within the elastic limits by using analytical methods. Hoffman yield criteria is employed to the elastic problem to find limit angular velocities. Composite body of the cylinders are consisting of isotropic matrix and transversely isotropic fibers which are unidirectionally aligned in circumferential direction. Alterations on the elastic stress and displacement fields are examined by taking various fiber volume fraction and wall thickness values. Obtained results emphasized that both parameters highly influence the distributions of stress, displacement and commencement of the yielding.
FARUKOĞLU, Ö. C., KORKUT, İ. (2020). Elastic Stresses of Rotating Transversely Isotropic Fiber Reinforced Composite Cylinders. International Journal of Engineering and Applied Sciences, Cilt: 12 - Sayı: 4, 125–137. https://ajindex.com/articles/766590
Dai, T., Dai, H. L., Investigation of mechanical behavior for a rotating fgm circular disk with a variable angular speed, Journal of Mechanical Science and Technology, 29(9), 3779-3787, 2015.
Eraslan, A. N., Arslan, E., Analytical and numerical solutions to rotating fgm disk, Journal of Multidisciplinary Engineering Science and Technology, 2(10), 2843-2850, 2015.
Zheng, Y., Bahaloo, H., Mousanezhad, D., Mahdi, E., Vaziri, A., Nayeb-Hashemi, H., Stress analysis in functionally graded rotating disks with non-uniform thickness and variable angular velocity, International Journal of Mechanical Sciences, 119, 283-293, 2016.
Çallıoğlu, H., Bektaş, N. B., Sayer, M., Stress analysis of functionally graded rotating disc: analytical and numerical solutions, Acta Mechanica Sinica, 27(6), 950-955, 2011.
Horgan, C. O., Chan, A. M., The stress response of functionally graded isotropic linearly elastic rotating disks, Journal of Elasticity, 55(3), 219-230, 1999.
Yıldırım, V., Effects of inhomogeneity and thickness parameters on the elastic response of a pressurized hyperbolic annulus/disc made of functionally graded material, International Journal of Engineering & Applied Sciences (IJEAS), 9(3), 36-50, 2017.
Dui, G., Zhou, D., Solutions for behavior of a functionally graded thick-walled tube subjected to mechanical and thermal loads, International Journal of Mechanical Sciences, 98, 70-79, 2015.
Dui, G., Zhang, J., An elasticity solution for functionally graded thick-walled tube subjected to internal pressure, International Journal of Mechanical Sciences, 89, 344-349, 2014.
Tütütncü, N., Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures, 29(9), 2032-2035, 2007.
Nejad, M. Z., Rahimi, G. H., Deformations and stresses in rotating fgm pressurized thick hollow cylinder under thermal load, Scientific Research and Essays, 4(3), 131-140, 2009.
Nie, G. J., Zhong, Z., Batra, R. C., Material tailoring for orthotropic elastic rotating disks, Composites Science and Technology, 71(3), 406-414, 2011.
Genta, G., Gola, M., The stress distribution in orthotropic rotating disks, Journal of Applied Mechanics, 48(3), 559-562, 1981.
Çallıoğlu, H., Stress analysis of an orthotropic rotating disc under thermal loading, Journal of Reinforced Plastics and Composites, 23(17), 1859-1867, 2004.
Eraslan, A. N., Kaya, Y., Varlı, E., Analytical solutions to orthotropic variable thickness disk problems, Pamukkale University Journal of Engineering Scienc