Consequently, obtained data from both the demands for reduction of energy use and the increased demand for comfort in buildings were analyzed.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:The green buildings increased in the 2000s are about designing and operating structures in the light of sustainable principles.
📊
Temel Bulgular & Veri:Although the certification systems encourage the development of the green building industry, certificated buildings’ expected performance difference in the occupancy leads to some problems.
💡
Sonuç & Katkı:Consequently, obtained data from both the demands for reduction of energy use and the increased demand for comfort in buildings were analyzed.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sustainability · Green Office Building · Energy Efficiency
Abstract
The green buildings increased in the 2000s are about designing and operating structures in the light of sustainable principles. Although the certification systems encourage the development of the green building industry, certificated buildings’ expected performance difference in the occupancy leads to some problems. In order to identify the problems affecting the energy performance of buildings, six green LEED-NC certified office buildings in America were examined and benchmarked. In this research, sampling analysis method was used. Consequently, obtained data from both the demands for reduction of energy use and the increased demand for comfort in buildings were analyzed.
GÖRGÜLÜ, L. S., AYÇAM, İ. (2019). LEED CERTIFIED OFFICE BUILDINGS’ POST OCCUPANCY EVALUATIONS OF ENERGY PERFORMANCE VALUES. Gazi University Journal of Science Part B: Art Humanities Design and Planning, Cilt: 7 - Sayı: 2, 239–255. https://ajindex.com/articles/759867
REFERENCES [1] Baylon, D., Storm, P., “Comparison of commercial LEED buildings and non-LEED buildings within the 2002-2004 Pacific Northwest commercial building stock, in: ACEEE Summer Study on Energy Efficiency of Buildings”, American Council for an Energy-Efficient Economy (Washington DC, USA), 1-12, (2008).[2] Bolin, R., “Case Study EPA Region 8 Headquarters”, High Performing Buildings Journal, 60-68, (2011). URL: http://www.hpbmagazine.org/attachments/article/12019/11W-EPA-Region-8-Headquarters-Denver-CO.pdf, 10 March (2019). [3] Ciravoğlu, A., “Sustainable Architecture: Architecture between Outmoded Understandings and Contemporary Discourses”, İstanbul: TMMOB Publication, 15, (2008).[4] Famuyibo, A.A., Duffy, A., Strachan, P., “Achieving a holistic view of the life cycle performance of existing dwellings”, Building and Environment, 70: 90–101, (2013). Doi: http://doi.org/10.1016/j.buildenv.2013.08.016 [5] Fowler, K., Rauch, E., Henderson, J., Kora, A., “Re-assessing green building performance: A post occupancy evaluation of 22 GSA buildings”, Pacific Northwest National Laboratory: Richland, WA, USA, (2011).[6] Fowler, K. M., Rauch, E. M., “Assessing green building performance: a post-occupancy evaluation of 12 GSA buildings”, Pacific Northwest National Laboratory, (2008). Report Number: PNNL-17393[7] Green Building Council of Australia (GBCA), “The Value of Green Star: a Decade of Environmental Benefits”, Green Building Council of Australia, Sydney, 2012. URL: http://www.gbcsa.org.za/wp-content/uploads/2013/06/GBCA-Evolution-2012-18-June-2012.pdf, 10 March (2019).[8] Meir, I. A., Garb, Y., Jiao, D., Cicelsky, A., “Post- Occupancy Evaluation: An Inevitable Step Toward Sustainability”, Advances In Building Energy Research, 3: 190-213, 2009. Doi: http://dx.doi.org/10.3763/aber.2009.0307 [9] Newsham, G.R., Mancini, S., Birt, B.J., “Do LEED-certified buildings save energy? Yes, but…”, Energy and Buildings, 41(8): 897–905, (2009). Doi: http://doi.org/10.1016/j.enbuild.2009.03.014 [10] Nicol, J. F. and Humphreys, M. A., “Adaptive thermal comfort and sustainable thermal standards for buildings”, Energy and Buildings, 34 (6): 563–572, (2002). Doi: https://doi.org/10.1016/S0378-7788(02)00006-3 [11] Öztürk, Z., Arayıcı, Y., Coates, P., “Post occupancy evaluation (POE) in residential buildings utilizing BIM and sensing devices: Salford energy house example”, Retrofit, The Lowry, Salford Quays, Greater Manchester, 4, (2012).[12] Pati, D., Augenbroe, G., “Modeling