Dergiler / Environmental Research and Technology / 2021 / Cilt: 4 - Sayı: 1

Investigation of the usability of zinc ferrite nanoparticles synthesized by microwave assisted combustion method as photocatalyst for removal of organic dyes from wastewaters

Sayfa
42–52
Yayın Tarihi
2021-03-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In photocatalysis experiments, it was observed that synthesized zinc ferrite nanoparticles provided very high removal efficiencies as photocatalysts and almost all of the dye content in the solution could be removed.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, zinc ferrite nanoparticles, which has an important place among the spinel ferrite structured nanomaterials due to its unique properties, were synthesized by microwave-assisted combustion method and later were used as photocatalysts in the removal of dyestuffs by photocatalytic degradation method from wastewaters of textile industry.
📊
Temel Bulgular & Veri:Heat treatment application is envisaged to solve this problem and in order to determine the optimum heat treatment temperature, the sample produced by microwave effect were subjected to heat treatment at 300℃, 400℃, 500℃, 600℃, 700℃, 800℃ and 900℃, respectively.
💡
Sonuç & Katkı:In photocatalysis experiments, it was observed that synthesized zinc ferrite nanoparticles provided very high removal efficiencies as photocatalysts and almost all of the dye content in the solution could be removed.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Microwave-assisted combustion method · photocatalysis · procion yellow H3EG

Abstract

In this study, zinc ferrite nanoparticles, which has an important place among the spinel ferrite structured nanomaterials due to its unique properties, were synthesized by microwave-assisted combustion method and later were used as photocatalysts in the removal of dyestuffs by photocatalytic degradation method from wastewaters of textile industry. In the synthesis studies, it was determined that the microwave effect alone was not sufficient to complete the transformation. Heat treatment application is envisaged to solve this problem and in order to determine the optimum heat treatment temperature, the sample produced by microwave effect were subjected to heat treatment at 300℃, 400℃, 500℃, 600℃, 700℃, 800℃ and 900℃, respectively. It has been observed that the heat treatment has a significant effect on the crystal structure of the particles and 700℃ has been determined as the optimum heat treatment temperature. The data obtained showed that, under these conditions, the zinc ferrite nanoparticles were successfully synthesized and the powder produced completely consisted of nano-sized particles. Moreover, results showed that the synhesized zinc ferrite nanoparticles has a saturation magnetization value sufficient to separate them from the aqueous medium. Finally, zinc ferrite nanoparticles produced under optimum conditions were used as photocatalysts in the removal of textile dye known as Procion Yellow HE-3G from wastewater by photocatalytic oxidation. In photocatalysis experiments, it was observed that synthesized zinc ferrite nanoparticles provided very high removal efficiencies as photocatalysts and almost all of the dye content in the solution could be removed.

🔖

Bu Makaleye Atıf Yap

KARAKAŞ, Z. K. (2021). Investigation of the usability of zinc ferrite nanoparticles synthesized by microwave assisted combustion method as photocatalyst for removal of organic dyes from wastewaters. Environmental Research and Technology, Cilt: 4 - Sayı: 1, 42–52. https://ajindex.com/articles/754234

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. R. Saranya, R.A. Raj, M.S. Al Salhi, S. Devanesan, “Dependence of Catalytic Activity of Nanocrystalline Nickel Ferrite on Its Structural, Morphological, Optical, and Magnetic Properties in Aerobic Oxidation of Benzyl Alcohol”,Journal of Superconductivity and Novel Magnetism, 31(4), pp.1219-1225, 2017.
  2. M. Hakamada, M. Mabuchi, “Nanoporous Gold Prism Microassembly through a Self-Organizing Route”, Nano Letters, 6(4), pp.882-885. 2006
  3. Rachna, N.B.Singh, A. Agarwal,”Preparation, Characterization, Properties and Applications of nano Zinc Ferrite”, Materials Today: Proceedings, 5(3), pp.9148-9155. 2018.
  4. R.C. Sripriya, V.A.F. Samson, S. Anand, J. Madhavan, M.V.A. Raj, ”Comparative studies of structural, magnetic and photocatalytic degradation on 4-chlorophenol by ZnFe2O4 nanostructures prepared via cost effective combustion methods”, Journal of Materials Science: Materials in Electronics, 29(16), pp.14084-14092, 2018
  5. T. Prakash, G.V.M. Williams, J. Kennedy, S. Rubanov, “High spin-dependent tunneling magnetoresistance in magnetite powders made by arc-discharge”, Journal of Applied Physics, 120(12), 2016
  6. Murmu PP, Kennedy J, Williams GVM, Ruck BJ, Granville S, Chong SV: Observation of magnetism, low resistivity, and magnetoresistance in the near-surface region of Gd implanted ZnO”, Applied Physics Letters, 101 (8). 2012
  7. S. Banik, I. Das, “Large magnetoresistance and relative cooling power in polycrystalline Pr0.775Sr0.225MnO3 compound”, Journal of Magnetism and Magnetic Materials, 460, pp. 234-238, 2018.
  8. K. Kaviyarasu, P.P. Murmu, J. Kennedy, F.T.Thema, D. Letsholathebe, L. Kotsedi, M. Maaza, ”Structural, optical and magnetic investigation of Gd implanted CeO2 nanocrystals”, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 409, pp.147-152, 2017.
  9. T. Prakash, G.V.M. Williams, J. Kennedy, S. Rubanov, “Formation of magnetic nanoparticles by low energy dual implantation of Ni and Fe into SiO2”, Journal of Alloys and Compounds, 667, pp.255-261, 2016.
  10. A.H. Morr, K. Haneda, “Magnetic structure of small NiFe2O4 particles”, Journal of Applied Physics, 52 (3), pp. 2496-2498, 1981.
  11. N.M. Deraz, A. Alarifi, ”Microstructure and Magnetic Studies of Zinc Ferrite Nano-Particles”, Int J Electrochem Sci, 7, pp. 650-6511, 2012.
  12. M. Sertkol, Y. Köseoğlu, A. Baykal, H. Kavas, A. Bozkurt, M.S. Toprak, “Microwave synthesis and characterization of Zn-doped nickel ferrite nanoparticles”, Journal of Alloys and Compounds, 486(1-2), pp. 3