Dergiler / Current Research in Dental Sciences / 2018 / Cilt: 28 - Sayı: 2

EFFECT OF DIFFERENT SURFACE TREATMENT ON BOND STRENGTH OF RESIN CEMENT TO ZIRCONIUM AND LEUCITE-REINFORCED GLASS CERAMIC

Sayfa
150–156
Yayın Tarihi
2018-04-22
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bulgular: Lösitle güçlendirilmiş cam seramik örneklerde en yüksek bağlanma dayanımı değerleri (12.06±1.4) hidroflorik aist uygulanan grupta, zirkonyum örneklerde (9.7±4.05) ise Co-Jet uygulanan örneklerde belirlendi.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:ABSTRACT Aim: The aim of this study was to determine shear bond strength of resin cement to zirconium and leucite-reinforced glass ceramic after different surface treatment.
📊
Temel Bulgular & Veri:Materials and Methods: A total of 50 discs of zirconium and leucite-reinforced glass ceramic were prepared (10 mm in diameter and 1 mm in thickness) according to the manufacturer’s instructions.
💡
Sonuç & Katkı:Bulgular: Lösitle güçlendirilmiş cam seramik örneklerde en yüksek bağlanma dayanımı değerleri (12.06±1.4) hidroflorik aist uygulanan grupta, zirkonyum örneklerde (9.7±4.05) ise Co-Jet uygulanan örneklerde belirlendi.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Zirconium · leucite-reinforced · glass ceramic

Özet

ABSTRACT Aim: The aim of this study was to determine shear bond strength of resin cement to zirconium and leucite-reinforced glass ceramic after different surface treatment. Materials and Methods: A total of 50 discs of zirconium and leucite-reinforced glass ceramic were prepared (10 mm in diameter and 1 mm in thickness) according to the manufacturer’s instructions. Specimens were embedded in self-cure acrylic resin blocks. Specimens were divided into five groups randomly (n=5), and the following treatments were applied: 1. Air abrasion with aluminium-oxide particles (50 μm), 2. Acid etching with 9,5% hydrofluoric acid, 3. Co-jet, 4. Nd:YAG laser irradiation (1 mm distance, 100 mJ, 20 Hz, 2 W) and 5. Er:YAG laser irradiation (1 mm distance, 400 mJ, 20 Hz, 8 W). After the surface-treatment methods, Panavia F dual-cure resin cement were applied on the specimens. All the specimens were subjected to a shear test to evaluate their bond strengths. The data were analyzed with one-way variance analysis (ANOVA). Results: In the leucite-reinforced glass ceramic specimens, the highest bonding values (12.06±1.4) was obtained in HF acid group. In the zirconium specimens, the highest bonding values (9.7±4.05) was obtained in CoJet group. However, adhesive failures were obtained in these groups. But, cohesive failures were obtained commonly in Co-jet groups. Conclusions: The in vitro findings from this study indicate that surface-treatment procedures applied to leucite-reinforced glass ceramic and zirconium are important to bond strength of resin cement. Keywords: Zirconium, leucite-reinforced glass ceramic, resin cement ZİRKONYUM VE LÖSİTLE GÜÇLENDİRİLMİŞ CAM SERAMİKLERİN REZİN SİMANLA BAĞLANMA DAYANIMINA FARKLI YÜZEY İŞLEMLERİNİN ETKİSİ ÖZ Amaç: Bu çalışmanın amacı, farklı yüzey işlemlerinden sonra rezin simanın zirkonyum ve lösitle güçlendirilmiş cam seramiklerle olan makaslama bağlanma dayanımını değerlendirmektir. Gereç ve Yöntem: Zirkonyum ve lösitle güçlendirilmiş cam seramikten toplamda 50 tane disk şeklinde (10 mm çap ve 1 mm kalınlığında) örnekler üretici talimatlarına uygun olarak hazırlandı. Örnekler self-cure akrilik rezine gömüldü. Örnekler rastgele 5 gruba ayrıldı ve şu yüzey işlemleri uygulandı: 1. Alüminyum oksit tozu ile kumlama (50 μm), 2. % 9.5’ lik hidroflorik asit ile pürüzlendirme, 3. Co-Jet, 4. Nd:YAG lazer uygulaması (1mm mesafeden, 100 mJ, 20Hz, 2W), 5. Er:YAG lazer uygulaması (1mm mesafeden, 400 mJ, 20Hz, 8 W). Yüzey işlemlerinden sonra, örneklerin üzerine Panavia F dual-cure rezin siman yerleştirildi. Tüm örneklere bağlanma dayanımlarını değerlendirmek için makaslama testi uygulandı. Elde edilen sonuçlar tek yönlü Varyans analizi ile değerlendirildi. Bulgular: Lösitle güçlendirilmiş cam seramik örneklerde en yüksek bağlanma dayanımı değerleri (12.06±1.4) hidroflorik aist uygulanan grupta, zirkonyum örneklerde (9.7±4.05) ise Co-Jet uygulanan örneklerde belirlendi. Ayrıca, bu gruplarda adeziv kopmalar gözlemlendi. Fakat koheziv kopmalar yaygın olarak Co-Jet uygulanan gruplarda gözlemlendi. Sonuç: Bu in-vitro çalışmanın bulguları zirkonyum ve lösitle güçlendirilmiş cam seramiklere uygulanan yüzey işlemlerinin rezin simanla olan bağlanma dayanımında önemli olduğunu göstermiştir. Anahtar Kelimeler: Zirkonyum, lösitle güçlendirilmiş cam seramik, rezin siman

🔖

Bu Makaleye Atıf Yap

ÖZDEMİR, H., BAYINDIR, F. (2018). EFFECT OF DIFFERENT SURFACE TREATMENT ON BOND STRENGTH OF RESIN CEMENT TO ZIRCONIUM AND LEUCITE-REINFORCED GLASS CERAMIC. Current Research in Dental Sciences, Cilt: 28 - Sayı: 2, 150–156. https://ajindex.com/articles/735750

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (17)

  1. Nakamura S, Yoshida K, Kamada K, Atsuta M. Bonding between resin luting cement and glass infiltrated alumina-reinforced ceramics with silane coupling agent. J Oral Rehabil 2004;31:785-93
  2. Kiyan VH, Saraceni CH, da Silveira BL, Aranha AC, Eduardo Cda P. The influence of internal surface treatments on tensile bond strength for two ceramic systems. Oper Dent 2007;32:457-65
  3. Guess PC, Andreja Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 2008;24:1556-67
  4. Paolo FM, Pierfrancesco RI, Luca R. An overview of zirconia ceramics; Basic properties and clinical applications. J Dent 2007;35:819-26
  5. Lawn BR, Deng Y, Lloyd IK, Janal MN, Rekow ED, Thompson VP. Materials Design Of Ceramic- Based Layer Structures For Crowns. J Dent Res 2002;81:433–8
  6. Vult P, Von Steyern, Carlson P, Nilner K. All-Ceramic Fixed Partial Dentures Designed According To The DC-Zirkon Technique: A 2-Year Clinical Study. J Oral Rehabil 2005;32:180–7
  7. Dental Materials Science. 2nd ed. Cork Universty Press. 1993. p. 112–120
  8. Qualtrough AJE, Piddock V. Ceramic Update. J Dent 1997;25:91–5
  9. Haselton DR,Diaz-Arnold A, Hillis SL. Clinical assessment of high-strenght all-ceramic crowns J. Prosthet Dent 2000;83:396-401
  10. Kern M. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 2000;13:350
  11. Lawn BR, Deng Y, Thompson VP. Use of contact testing in the characterization and design of allceramic crown like layer structures: A review. J Prosthet Dent 2001;86:495-510
  12. Tinscherta J, Zweza D, Marxa R, Anusaviceb K J. Structural Reliability Of Alumina-, Feldspar-,Leucite-, Mica- And Zirconia-Based Ceramics. J Dent 2000;28:529–35
  13. Aksoy İ, Varol S, Özkan Y. Zirkonyum restorasyonların simantasyonu. Ata Üniv Diş Hek Fak Derg. 2012;Suppl 6:124-31
  14. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003;89:268-74
  15. Peumans M, Van Meerbeek B, Lambrechts P, Vanherle G. Porcelain veneers: a review of the literature. J Dent 2000;28:163-77
  16. Kern M, Thompson VP. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology and changes in the surface composition. J Prosthet Dent 1994;7:453-61
  17. Shopr AM, Sobrino LC, Consani S, Sinhoreti M, Knowles JC. Influent of surface conditions and silane agent on the bond of resin to IPS Empress