Dergiler / Current Research in Dental Sciences / 2022 / Cilt: 32 - Sayı: 1

ÜÇ FARKLI NİKEL-TİTANYUM DÖNER ALET SİSTEMİNİN VÜCUT ISISINDAKI DÖNGÜSEL YORGUNLUK DİRENÇLERİNİN KARŞILAŞTIRMALI OLARAK DEĞERLENDİRİLMESI

Sayfa
49–52
Yayın Tarihi
2022-02-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bulgular: Eğe tipleri içerisinde, en yüksek döngüsel yorgunluk direnci OC eğelerinde (1072,327 158,272), en düşük direnç de PU eğelerinde (439,798 129,942) görüldü.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Amaç: Bu çalışmanın amacı, üç farklı nikel-titanyum (Ni-Ti) döner eğe sisteminin vücut ısısındaki döngüsel yorgunluk dirençlerinin karşılaştırılmalı olarak değerlendirilmesidir.
📊
Temel Bulgular & Veri:Yöntemler: Bu çalışmada, üç farklı Ni-Ti döner eğe sisteminden (ProTaper Universal-PU, Twisted File-TF, One Curve-OC) toplam 90 adet kanal eğesi kullanıldı.
💡
Sonuç & Katkı:Bulgular: Eğe tipleri içerisinde, en yüksek döngüsel yorgunluk direnci OC eğelerinde (1072,327 158,272), en düşük direnç de PU eğelerinde (439,798 129,942) görüldü.
🔬Tür:Araştırma Makalesi
📍Kapsam:90 adet
⚙️Değişkenler:ProTaper Universal · Twisted File · One Curve

Abstract

Amaç: Bu çalışmanın amacı, üç farklı nikel-titanyum (Ni-Ti) döner eğe sisteminin vücut ısısındaki döngüsel yorgunluk dirençlerinin karşılaştırılmalı olarak değerlendirilmesidir. Yöntemler: Bu çalışmada, üç farklı Ni-Ti döner eğe sisteminden (ProTaper Universal-PU, Twisted File-TF, One Curve-OC) toplam 90 adet kanal eğesi kullanıldı. Tüm eğe grupları kanal içi sıcaklığında (35 °C), 60° eğime sahip suni kanallarda döngüsel yorgunluk direnci açısından test edildi. Sıcaklık, deney boyunca bir su altı termometresi ve bir termostat ile kontrol edildi. Kırılıncaya kadar geçen süre ve tur sayısı hesaplandı. Elde edilen sonuçlar istatistiksel olarak SPSS 23.0 (IBM SPSS Statistics for Windows, Version 23.0. Armonk, NY: IBM Corp.) paket programı ile analiz edildi. Bulgular: Eğe tipleri içerisinde, en yüksek döngüsel yorgunluk direnci OC eğelerinde (1072,327 158,272), en düşük direnç de PU eğelerinde (439,798 129,942) görüldü. Sonuç: Bu sonuçlara göre, eğimli kanallarda döngüsel yorgunluk direncinin daha yüksek olması ve kırık kısmın uzunluğunun daha fazla olması gibi avantajları sayesinde One Curve eğe sisteminin kullanımı daha avantajlı olabilir. Anahtar kelimeler: ProTaper Universal, Twisted File, One Curve, döngüsel yorgunluk direnci Abstract Objective: The aim of this study is to comparatively investigate the cyclic fatigue of three different nickel-titanium (Ni-Ti) rotary files at body temperature. Methods: A total of 90 Ni-Ti rotary instruments from 3 brands (ProTaper Universal-PU, Twisted File-TF, One Curve-OC) were selected. At intracanal temperature (35°C), all groups of files were tested for cyclic fatique resistance in artificial root canals with 60° curvature at body temperature. The time until fracture was recorded and the number of cycles were calculated for each group. The results were analyzed by statistically. Results: Among the file types, OC files (1072,327 158,272) were the most resistance to cyclic fatigue and PU files (439,798 129,942) had the lowest results. Conclusion: According to these results, the use of the One Curve file system may be advantageous due to its advantages such as higher cyclic fatigue resistance in curved canals and longer fracture length. Keywords: ProTaper Universal, Twisted File, One Curve, cyclic fatique resistance

🔖

Bu Makaleye Atıf Yap

ÖZTÜRK, Z., ERŞAHAN, Ş., HEPSENOĞLU, Y. E., EKİZ, D., TOPKARA, C. (2022). ÜÇ FARKLI NİKEL-TİTANYUM DÖNER ALET SİSTEMİNİN VÜCUT ISISINDAKI DÖNGÜSEL YORGUNLUK DİRENÇLERİNİN KARŞILAŞTIRMALI OLARAK DEĞERLENDİRİLMESI. Current Research in Dental Sciences, Cilt: 32 - Sayı: 1, 49–52. https://ajindex.com/articles/735591

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Guelzow A, Stamm O, Martus P, Kielbassa AM. Comparative study of six rotary nickel-titanium systems and hand instrumentation for root canal preparation. Int Endod J. 2005;38(10):743–752
  2. Liu SB, Fan B, Cheung GS, et al. Cleaning effectiveness and shaping ability of rotary ProTaper compared with rotary GT and manual K-Flexofile. Am J Dent. 2006;19(6):353–19358
  3. McGuigan MB, Louca C, Duncan HF. The impact of fractured endodontic instruments on treatment outcome. Br Dent J. 2013;214(6):285–289
  4. Peters OA, de Azevedo Bahia MG, Pereira ES. Contemporary root canal preparation: innovations in biomechanics. Dent Clin North Am. 2017;61(1):37–58
  5. Kaul R, Farooq R, Kaul V, Khateeb SU, Purra AR, Mahajan R. Comparative Evaluation of Physical Surface Changes and Incidence of Separation in Rotary Nickel-Titanium Instruments: An in Vitro SEM Study. Iran Endod J. 2014;9(3):204-209
  6. Choi J, Oh S, Kim YC, Jee KK, Kum K, Chang S. Fracture resistance of K3 nickel-titanium files made from different thermal treatments. Bioinorg Chem App. 2016;2016:6374721
  7. Gambarini G, Gerosa R, De Luca M, Garala M, Testarelli L. Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008;105(6):798-800
  8. Cheung GS, Peng B, Bian Z, Shen Y, Darvell BW. Defects in ProTaper S1 instruments after clinical use: fractographic examination. Int Endod J. 2005;38(11):802-809
  9. Özyürek T, Özerol NB. Comparison of cyclic fatigue resistance of Revo-S and G-Star NiTi Files. J Appl Dent Med Sci. 2016;15(12):112-114
  10. Özyürek T. Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments. J Endod. 2016;42(10):1536-1539
  11. Gündoğar M, Özyürek T. Cyclic fatigue resistance of OneCurve, HyFlex EDM, Wave One gold, and Reciproc blue nickel-titanium instruments. J Endod. 2017;43(7):1192-1196
  12. Gundoğar M. HyFlex EDM, RC Gold ve G-Star Nikel Titanyum Eğelerinin Döngüsel Yorgunluğa Karşı Dirençlerinin Karşılaştırılması. Turkiye Klinikleri J Dental Sci. 2020;26(1):21-25
  13. Grande NM, Plotino G, Pecci R, Bedini R, Malagnino VA, Somma F. Cyclic fatigue resistance and three-dimensional analysis of instruments from two nickel-titanium rotary systems. Int Endod J. 2006;39(10):755-763
  14. Plotino G, Costanzo A, Grande NM, Petrovic R, Testarelli L, Gambarini G. Experimental evaluation on the influence of autoclave sterilization on the cyclic f