Dergiler / Turkish Journal of Engineering and Environmental Sciences / 2000 / Cilt: 24 - Sayı: 3

Effects of Fiber Volume Fraction and Fiber Orientation on the Tribological Behaviour of Unidirectionally Oriented Glass Fiber-Polyester Composites

Sayfa
181–192
Yayın Tarihi
2000-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Wear mechanisms were also examined in relation to the variation in fiber orientation and fiber volume fraction using SEM micrographs.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, a unidirectionally oriented fiber reinforced polymeric composite was produced by using silane coated glass fiber and polyester resin by means of the hot press method.
📊
Temel Bulgular & Veri:The wear rate was minimum when the orientation of the fibers was parallel to the sliding surface and 15% volume fraction.
💡
Sonuç & Katkı:Wear mechanisms were also examined in relation to the variation in fiber orientation and fiber volume fraction using SEM micrographs.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Fiber orientation · fiber volume fraction · plastic composites

Özet

In this study, a unidirectionally oriented fiber reinforced polymeric composite was produced by using silane coated glass fiber and polyester resin by means of the hot press method. The friction and wear behaviour of the composite was investigated as a function of fiber volume fraction and varying fiber orientations with respect to the sliding direction. The wear rate was minimum when the orientation of the fibers was parallel to the sliding surface and 15% volume fraction. This can be attributed to different wear mechanisms for different fiber directions. Coefficient of friction and wear rate were decreased with increasing sliding speed and contact force. Wear mechanisms were also examined in relation to the variation in fiber orientation and fiber volume fraction using SEM micrographs.

Abstract

In this study, a unidirectionally oriented fiber reinforced polymeric composite was produced by using silane coated glass fiber and polyester resin by means of the hot press method. The friction and wear behaviour of the composite was investigated as a function of fiber volume fraction and varying fiber orientations with respect to the sliding direction. The wear rate was minimum when the orientation of the fibers was parallel to the sliding surface and 15% volume fraction. This can be attributed to different wear mechanisms for different fiber directions. Coefficient of friction and wear rate were decreased with increasing sliding speed and contact force. Wear mechanisms were also examined in relation to the variation in fiber orientation and fiber volume fraction using SEM micrographs.

🔖

Bu Makaleye Atıf Yap

YAŞAR, İ., ARSLAN, F. (2000). Effects of Fiber Volume Fraction and Fiber Orientation on the Tribological Behaviour of Unidirectionally Oriented Glass Fiber-Polyester Composites. Turkish Journal of Engineering and Environmental Sciences, Cilt: 24 - Sayı: 3, 181–192. https://ajindex.com/articles/723030

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...