Dergiler / Wood Industry and Engineering / 2021 / Cilt: 3 - Sayı: 2

EFFECTS OF WOOD SPECIES OF THE DOWELS AND FIBER WOVEN FABRIC TYPES ON BENDING MOMENT RESISTANCE OF L-SHAPED JOINTS

Sayfa
12–22
Yayın Tarihi
2021-12-25
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In general, it was determined that wooden dowel species by 31%, and fiber woven fabric types by 41% have been effects on the results of the bending tests.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study investigated the bending moment capacity of L-type, two-pin dowel joints connected with Scots pine dowel (Pinus slyvestris Lipsky), beech dowel (Fagus orientalis Lipsky), chestnut dowel (Castanea sativa Mill.) and oak dowel (Quercus petraea Lieble) and reinforced with basalt and glass woven fabrics (BFRP and GFRP).
📊
Temel Bulgular & Veri:As a result of bending test, it was determined that one layer and two surfaces the reinforced with fiber woven fabrics increases the mechanical performance of furniture fasteners according to obtained data from tests conducted on the L-type, two pin dowel joints.
💡
Sonuç & Katkı:In general, it was determined that wooden dowel species by 31%, and fiber woven fabric types by 41% have been effects on the results of the bending tests.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Bending moment capacity · wooden dowel · GFRP

Abstract

This study investigated the bending moment capacity of L-type, two-pin dowel joints connected with Scots pine dowel (Pinus slyvestris Lipsky), beech dowel (Fagus orientalis Lipsky), chestnut dowel (Castanea sativa Mill.) and oak dowel (Quercus petraea Lieble) and reinforced with basalt and glass woven fabrics (BFRP and GFRP). The tests was carried out to determine the bending moment capacity of dowel joints. As a result of bending test, it was determined that one layer and two surfaces the reinforced with fiber woven fabrics increases the mechanical performance of furniture fasteners according to obtained data from tests conducted on the L-type, two pin dowel joints. This study showed that the joining with the oak dowel was 12% higher than the chestnut dowel, 25% the beech dowel, and 55% higher than the Scots pine dowel (for the bending moment capacity), respectively. According to the bending moment capacity of the samples reinforced by fiber woven fabrics. The highest bending moment capacity value was obtained in the test specimens of reinforced with the basalt woven fabric, the lowest bending moment capacity value was obtained in the test specimens not reinforced (Control). In general, it was determined that wooden dowel species by 31%, and fiber woven fabric types by 41% have been effects on the results of the bending tests.

🔖

Bu Makaleye Atıf Yap

KARAMAN, A., YILDIRIM, M. N. (2021). EFFECTS OF WOOD SPECIES OF THE DOWELS AND FIBER WOVEN FABRIC TYPES ON BENDING MOMENT RESISTANCE OF L-SHAPED JOINTS. Wood Industry and Engineering, Cilt: 3 - Sayı: 2, 12–22. https://ajindex.com/articles/710550

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. André A. and Johnsson H. (2010). Flax Fiber-Reinforced Glued-Laminated Timber in Tension Perpendicular to the Grain: Experimental Study and Probabilistic Analysis. J, Mater, Civ, Eng, 22(9), 827–835. https://doi,org/10,1061/(ASCE)MT,1943-5533,0000070
  2. Bal B.C. and Bektaş İ. (2018). A Research on The Determination of the Relationship Between Density and Some Mechanical Properties of Wood. Mamad, 1(2), 51-61. https://doi,org/10,33725/mamad,467353
  3. Borri A. Corradi M. and Grazini, A.A. (2005). Method for Flexural Reinforcement of Old Wood Beams with CFRP Materials. Compos. Part B Eng, 36, 143–153. Borri A. Corradi M. and Speranzini E. (2013a). Reinforcement of Wood with Natural Fibers. Compos B Eng, 53, 1-8, https://doi,org/10,1016/j,compositesb,2013,04,039 Borri A. Corradi M. and Speranzini E. (2013a). Bending Tests on Natural Fiber Reinforced Fir Wooden Elements. Adv, Mater, Res, 778, 537–544. https://doi:10,1016/j,compositesb,2013,04,039
  4. Brol J. and Wdowiak A. (2017). The Use of Glass And Aramid Fibres for The Strengthening of Timber Structures. Ann, Wars, Univ, Life Sci, For, Wood Technol 100, 128–138.
  5. Brol J. Nowak, T. and Wdowiak A. (2018). Numerical Analysis and Modelling of Timber Elements Strengthened with FRP Materials. Ann, Wars, Univ, Life Sci, For, Wood Technol 104, 274–282.
  6. Bozkurt Y. and Erdin N. (1995), The Relationship Between Density and Mechanical Properties of Woods. Istanbul University Journal of Forestry Faculty, 45(2), 11-34.
  7. Chairman C.A. Kumaresh and Babu S.P. (2013), Mechanical and Abrasive Wear Behavior of Glass and Basalt Fabric-Reinforced Epoxy Composites. J Appl Polym Sci 130(1), 120-130. https://doi,org/10,1002/app,39154
  8. Chen M. and Lyu J. (2018). Properties of Double Dowel Joints Constructed of Medium Density Fiberboard. Maderas Ciencia Y Tecnología, 20(3), 369-80. doi: 10.4067/S0718-221X2018005003801 Chen M. Li X.M. and Lyu J. H. (2018), Influence of Dowel Diameter and Curing Time on Strength of Double Dowel Joint. Wood Res, 63(4), 591-598.
  9. Colombo C. Vergani L. and Burman M. (2012). Static and Fatgiue Characterization of New Basalt Fibre Reinforced. Composites, Compos Struct 94,1165-1174. http://dx,doi,org/10,1016/j,compstruct,2011,10,007
  10. Dorigato A. and Pegoretti A. (2012). Fatigue Resistance of Basalt Fibers-Reinforced Laminates. J Compos Mater 46(15), 1773-1785. https://doi,org/10,1177/0021998311425620 Eckelman C.A. Textbook of Product Engineering and Strength Design of Furniture. Purdue University. West Lafayette. IN. USA.