The results of this study showed that the pH of the wastewater solution maintained the local pH discharge limits between 6 and 9 after the electrochemical oxidation.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, pH and ΔpH change in the electrochemical oxidation of imidacloprid (IMD) pesticide using boron-doped diamond (BDD) electrodes was investigated in the presence of Na2SO4 electrolyte.
📊
Temel Bulgular & Veri:The process parameters were operated as imidacloprid concentration (40-200 mg/L), electrolyte concentration (2-10 g/L), current density (4-20 mA/cm2) and reaction temperature (20-60°C). pH and ΔpH values increased with increasing Na2SO4 concentration, current density, and reaction temperature, and decreasing the imidacloprid concentration at 120 min reaction time.
💡
Sonuç & Katkı:The results of this study showed that the pH of the wastewater solution maintained the local pH discharge limits between 6 and 9 after the electrochemical oxidation.
In this study, pH and ΔpH change in the electrochemical oxidation of imidacloprid (IMD) pesticide using boron-doped diamond (BDD) electrodes was investigated in the presence of Na2SO4 electrolyte. The process parameters were operated as imidacloprid concentration (40-200 mg/L), electrolyte concentration (2-10 g/L), current density (4-20 mA/cm2) and reaction temperature (20-60°C). pH and ΔpH values increased with increasing Na2SO4 concentration, current density, and reaction temperature, and decreasing the imidacloprid concentration at 120 min reaction time. The results of this study showed that the pH of the wastewater solution maintained the local pH discharge limits between 6 and 9 after the electrochemical oxidation.
Körbahti, B. K., Erdem, M. C. (2017). pH CHANGE IN ELECTROCHEMICAL OXIDATION OF IMIDACLOPRID PESTICIDE USING BORON-DOPED DIAMOND ELECTRODES. Turkish Journal of Engineering, Cilt: 1 - Sayı: 1, 32–36. https://ajindex.com/articles/705086
Arapoglou, D., Vlyssides, A., Israilides, C., Zorpas, A. and Karlis, P. (2003). “Detoxification of methyl-parathion pesticide in aqueous solutions by electrochemical oxidation”. Journal of Hazardous Materials, Vol. 98, No. 1-3, pp. 191-199.
Brillas, E. and Martínez-Huitle, C.A. (2015). “Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods. An updated review”. Applied Catalysis B: Environmental, Vol. 166-167, pp. 603-643.
Brillas, E., Sirés, I., Arias, C., Cabot, P.L., Centellas, F., Rodríguez, R.M. and Garrido, J.A. (2005). “Mineralization of paracetamol in aqueous medium by anodic oxidation with a boron-doped diamond electrode”. Chemosphere, Vol. 58, No. 4, pp. 399-406. Cañizares, P., Sáez, C., Lobato, J. and Rodrigo, M.A. (2006). “Detoxification of synthetic industrial wastewaters using electrochemical oxidation with boron-doped diamond anodes”. Journal of Chemical Technology & Biotechnology, Vol. 81, No. 3, pp. 352-358.
Cartaxo, M.A.M., Borges, C.M., Pereira, M.I.S. and Mendonça, M.H. (2015). “Electrochemical oxidation of paraquat in neutral medium”. Electrochimica Acta, Vol. 176, pp. 1010-1018.
Comninellis, Ch. and Chen, G. (2010).
Electrochemistry for the Environment, Springer, USA. Fontmorin, J.M., Fourcade, F., Geneste, F., Soutrel, I., Floner, D. and Amrane, A. (2015). “Direct electrochemical oxidation of a pesticide, 2,4-dichlorophenoxyacetic acid, at the surface of a graphite felt electrode: Biodegradability improvement”. Comptes Rendus Chimie, Vol. 18, No. 1, pp. 32-38.
Galt, R.E. (2008). “Beyond the circle of poison: Significant shifts in the global pesticide complex, 1976-2008”.
Global Environmental Change, Vol. 18, No. 4, pp. 786-799.
Gullino, M.L. and Kuijpers, L.A.M. (1994). “Social and Political Implications of Managing Plant Diseases with Restricted Fungicides in Europe”. Annual Review of Phytopathology, Vol. 32, No. 1, pp. 559-581.
Körbahti, B.K. and Artut, K. (2010). “Electrochemical oil/water demulsification and purification of bilge water using Pt/Ir electrodes”. Desalination, Vol. 258, No. 1-3, pp. 219-228.
Körbahti, B.K. and Taşyürek, S. (2015). “Electrochemical oxidation of ampicillin antibiotic at boron-doped diamond electrodes and process optimization using response surface methodology”. Environmental Science and Pollution Research, Vol. 22, No. 5, pp. 3265-3278. Lazarević-Pašti, T.D., Bondžić, A.M., Pašti, I.A. and Vasić, V.M. (2012). “Indirect electrochemical oxidation of organophosphorous