It was concluded that the selection of DP grade steel sheet material according to the MOORA ratio approach among the materials used in the study would be the optimum choice.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:The new generation of steel grades that can be used in automotive construction is increasing day by day and the material selection becomes very important both in the design and manufacturing processes due to the development in the materials.
📊
Temel Bulgular & Veri:In this study, data on tensile strength, formability, load that weld joints can bear, fatigue stress, corrosion resistance and price criteria of high strength low alloy (HSLA), dual phase (DP), three phase (TRIP) and complex phase (CP) steel sheet materials used in the automotive industry were determined and a study was conducted for the material selection using the MOORA (Multi Objective Optimization on the Basis of Ratio Analysis) ratio approach.
💡
Sonuç & Katkı:It was concluded that the selection of DP grade steel sheet material according to the MOORA ratio approach among the materials used in the study would be the optimum choice.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Automotive construction · automotive sheet materials · steel sheet grades
Abstract
The new generation of steel grades that can be used in automotive construction is increasing day by day and the material selection becomes very important both in the design and manufacturing processes due to the development in the materials. In this study, data on tensile strength, formability, load that weld joints can bear, fatigue stress, corrosion resistance and price criteria of high strength low alloy (HSLA), dual phase (DP), three phase (TRIP) and complex phase (CP) steel sheet materials used in the automotive industry were determined and a study was conducted for the material selection using the MOORA (Multi Objective Optimization on the Basis of Ratio Analysis) ratio approach. It was concluded that the selection of DP grade steel sheet material according to the MOORA ratio approach among the materials used in the study would be the optimum choice.
ÖZAKIN, B. (2022). An application for the selection of steel sheet materials used in automotive construction with the MOORA method. International Journal of Automotive Engineering and Technologies, Cilt: 11 - Sayı: 3, 91–95. https://ajindex.com/articles/672415
Cornette, D. Hourman, T. Hudin, O. Laurent, J. P. and Reynaert, A. High strength steels for automotive safety parts, SAE Technical Paper, no. 01-0078, 2001.
Hoffmann, D. O. Steel lightweight materials and design for environmental friendly mobility, Industrial Technologies Conference, Aarhus, Germany, 2012.
Çalışkan, H. Kurşuncu, B. Kurbanoğlu, C. and Güven, Ş. Y. Material selection for the tool holder working under hard milling conditions using different multi criteria decision making methods, Materials & Design, vol. 45, pp. 473-479, 2013.
Chatterjee, P. and Chakraborty, S. Material selection using preferential ranking methods, Materials & Design, vol. 35, pp. 384-393, 2012.
Thakker, A. Jarvis, J. Buggy, M. and Sahed, A. A novel approach to materials selection strategy case study: Wave energy extraction impulse turbine blade, Materials & Design, vol. 29, no. 10, pp. 1973-1980, 2008.
Raju, S. S. Murali, G. B. and Patnaik, P. T. Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods, Journal of Reinforced Plastics and Composites, vol. 39, no. 19-20, pp. 721-732, 2020.
Hambali, A. Sapuan, S. M. Ismail, N. and Nukman, Y. Material selection of polymeric composite automotive bumper beam using analytical hierarchy process, Journal of Central South University of Technology, vol. 17, no. 2, pp. 244-256, 2010.
Mayyas, A. Shen, Q. Mayyas, A. Shan, D. Qattawi, A. and Omar, M. Using quality function deployment and analytical hierarchy process for material selection of body-in-white, Materials & Design, vol. 32, no. 5, pp. 2771-2782, 2011.
Girubha R. J. and Vinodh, S. Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component, Materials & Design, vol. 37, pp. 478-486, 2012.
Hasanzadeh, R. Azdast, T. Eungkee Lee, R. and Afsari Ghazi, A. Experimental polymeric nanocomposite material selection for automotive bumper beam using multi-criteria decision making methods, Iranian Journal of Materials Science and Engineering, vol. 14, no. 3, pp. 1-10, 2017.
Mondal, S. Ghosh, A. and Deshpande, N. V. Automobile wheel material selection using Multi-Objective Optimization on the basis of ratio analysis (MOORA) method, International