Dergiler / Gümüşhane Üniversitesi Fen Bilimleri Dergisi / 2022 / Cilt: 12 - Sayı: 1

Bina soğutma kapasitesine etki eden parametrelerin yanıt yüzey yöntemi (YYY) kullanılarak incelenmesi

Investigation of the parameters affecting the building cooling capacity using the response surface method (RSM)

Sayfa
309–319
Yayın Tarihi
2022-01-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu da modelin güvenilir olduğunu göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada Ankara iklim şartlarında yer alan örnek bir yapı için enerji analiz programı kullanılarak, binanın dış duvar yalıtım kalınlığının, cam özelliğinin ve tasarım sıcaklığının binanın soğutma kapasitesi üzerindeki etkileri matematiksel ve istatistiksel olarak incelenmiştir.
📊
Temel Bulgular & Veri:Oluşturulan modelin önemi varyans analizi (ANOVA) yapılarak incelenmiştir ve P-değeri 0.05’ten az çıkmıştır.
💡
Sonuç & Katkı:Bu da modelin güvenilir olduğunu göstermektedir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Carrier HAP · Soğutma kapasitesi · Yalıtım kalınlığı

Özet

Bu çalışmada Ankara iklim şartlarında yer alan örnek bir yapı için enerji analiz programı kullanılarak, binanın dış duvar yalıtım kalınlığının, cam özelliğinin ve tasarım sıcaklığının binanın soğutma kapasitesi üzerindeki etkileri matematiksel ve istatistiksel olarak incelenmiştir. Değiştirilen bu parametreler ile yıllık soğutma yükleri hesaplanmış ve matematiksel bir model oluşturulmuştur. Analizler Carrier firması tarafından sunulan saatlik analiz programı (Carrier HAP) kullanılarak simüle edilmiştir. Oluşturulan modelin önemi varyans analizi (ANOVA) yapılarak incelenmiştir ve P-değeri 0.05’ten az çıkmıştır. Bu da modelin güvenilir olduğunu göstermektedir. Modelin doğrulaması yapılmış olup, hata oranı-0.27 ile 0.26 arasında değiştiği görülmüştür. Örnek yapı için minimum soğutma kapasitesinin, duvar ısı iletim katsayısının 0.46 ile 1.03 arasında değiştiği, cam ısı iletim katsayısının ise 2.48 ile 3.7 arasında değiştiği durumda elde edileceği sonucuna ulaşılmıştır.

Abstract

In this study, the effects of the exterior wall insulation thickness, glass feature and design temperature on the cooling capacity of the building were investigated mathematically and statistically by using an energy analysis program for a sample building in Ankara climate conditions. With these changed parameters, annual cooling loads were calculated and a mathematical model was created. Analyzes were simulated using the hourly analysis program (Carrier HAP) offered by the Carrier company. The importance of the created model was examined by performing analysis of variance (ANOVA) and the p-value was less than 0.05. This shows that the model is reliable. The model was validated and the error rate was found to vary between -0.27 and 0.26. It has been concluded that the minimum cooling capacity for the sample structure will be obtained if the wall heat transmission coefficient varies between 0.46 and 1.03, and the glass heat transmission coefficient varies between 2.48 and 3.7.

🔖

Bu Makaleye Atıf Yap

ÖZBEK, K., ÖZYURT, Ö. (2022). Bina soğutma kapasitesine etki eden parametrelerin yanıt yüzey yöntemi (YYY) kullanılarak incelenmesi. Gümüşhane Üniversitesi Fen Bilimleri Dergisi, Cilt: 12 - Sayı: 1, 309–319. https://ajindex.com/articles/668368

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Alaidroos, A. and Krarti, M. (2015). Optimal design of residential building envelope systems in the Kingdom of Saudi Arabia. Energy and Buildings, 86, 104–117. https://doi.org/10.1016/j.enbuild.2014.09.083
  2. Aldawi, F., Alam, F., Date, A., Alghamdi, M. and Aldhawi, F. (2013). A new house wall system for residential buildings. Energy and Buildings, 67, 403–418. https://doi.org/10.1016/j.enbuild.2013.08.019
  3. Atalay, D. (2018). Avrupa ve Amerikan standartlarına göre bina konfor havalandırması sistemlerinde kullanıcılara sağlanması gereken taze hava miktarlarının karşılaştırılması. TTMD Dergisi, 115. Bichiou, Y. and Krarti, M. (2011). Optimization of envelope and HVAC systems selection for residential buildings. Energy and Buildings, 43(12), 3373–3382. https://doi.org/10.1016/j.enbuild.2011.08.031 Binalarda enerji performansı yönetmeliği. (2008). T.C. Resmî Gazete (27075, 5 Aralık 2008)
  4. Box, G. E. P. and Wilson, K. B. (1951). On the Experimental Attainment of Optimum Conditions. Journal of the Royal Statistical Society: Series B (Methodological), 13(1), 1–38. https://doi.org/10.1111/j.2517-6161.1951.tb00067.x
  5. Cao, Y. and Shen, D. (2019). Contribution of shared bikes to carbon dioxide emission reduction and the economy in Beijing. Sustainable Cities and Society, 51. https://doi.org/10.1016/j.scs.2019.101749
  6. Carrier Corporation. (2015). Hourly Analysis Program Quick Reference Guide. Dabaieh, M., Wanas, O., Hegazy, M. A. and Johansson, E. (2015). Reducing cooling demands in a hot dry climate: A simulation study for non-insulated passive cool roof thermal performance in residential buildings. Energy and Buildings, 89, 142–152. https://doi.org/10.1016/j.enbuild.2014.12.034
  7. Enerji verimliliği kanunu. (2007). T.C. Resmî Gazete (26510, 18 Nisan 2007)
  8. Eskin, N. and Türkmen, H. (2008). Analysis of annual heating and cooling energy requirements for office buildings in different climates in Turkey. Energy and Buildings, 40(5), 763–773. https://doi.org/10.1016/j.enbuild.2007.05.008
  9. Florides, G. A., Tassou, S. A., Kalogirou, S. A. and Wrobel, L. C. (2002). Measures used to lower building energy consumption and their cost effectiveness. Applied Energy, 73(3–4), 299–328. https://doi.org/10.1016/S0306-2619(02)00119-8
  10. Gelis, K. and Akyurek, E. F. (2021). Entropy generation of different panel radiator types: design of experiments using response surface methodology (RSM). Journal of Building Engineering, 41, 102369. https://doi.org/10.1016/j.jobe.2021.102369
  11. Geliş, K. ve Yeşildal, F