Dergiler / Gümüşhane Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 11 - Sayı: 4

Yeni bir yöntem ve öncü maddeler ile bor nitrür nanotüplerin (BNNT'lerin) sentezi ve karakterizasyonu

Synthesis and characterization of boron nitride nanotubes (BNNTs) with a new method and precursor materials

Sayfa
1217–1224
Yayın Tarihi
2021-10-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Buda sentezlenen BNNT’lerin önemini ve kalitesini arttırmaktadır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bor nitrür nanotüpler (BNNT’ler) ısıl ve elektriksel yalıtkanlıkları, oksidasyona karşı dayanıklılıkları, yüksek hidrofobiteleri ve yüksek hidrojen depolama kapasiteleri gibi üstün özelliklerinin yanı sıra biyouyumlu özellikleri sayesinde birçok uygulama alanına sahiptir.
📊
Temel Bulgular & Veri:Bu çalışmada, literatürde daha önce denenmemiş öncü maddeler ve yöntemle yüksek saflıkta ve verimde BNNT’ler sentezledi.
💡
Sonuç & Katkı:Buda sentezlenen BNNT’lerin önemini ve kalitesini arttırmaktadır.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:BNNT’ler · Karakterizasyon · Sentez

Özet

Bor nitrür nanotüpler (BNNT’ler) ısıl ve elektriksel yalıtkanlıkları, oksidasyona karşı dayanıklılıkları, yüksek hidrofobiteleri ve yüksek hidrojen depolama kapasiteleri gibi üstün özelliklerinin yanı sıra biyouyumlu özellikleri sayesinde birçok uygulama alanına sahiptir. Dolayısıyla BNNT için son yıllarda gittikçe artan bir ilgiyle yeni sentez yöntemleri araştırılmaktadır. Bu çalışmada, literatürde daha önce denenmemiş öncü maddeler ve yöntemle yüksek saflıkta ve verimde BNNT’ler sentezledi. Sentez için bir kimyasal buhar depolama (CVD) fırını kullanıldı ve çeşitli parametreler değiştirilerek optimum koşullar elde edildi. Elde edilen BNNT’lerin yapısı fourier dönüşümlü kızılötesi spektroskopisi (FTIR), Raman spektroskopisi ve bir UV-visible spektrofotometresi kullanılarak karakterize edildi. Ayrıca yüzey morfolojileri geçirimli elektron mikroskobu (TEM) ve taramalı elektron mikroskobu (SEM) kullanılarak aydınlatıldı. Bunla birlikte HR-TEM (yüksek çözünürlüklü geçirimli elektron mikroskobu) analiz sonuçlarına göre elde edilen BNNT’lerin, sentezlenmesi zor olan tek duvarlı (single-walled) bir yapıya sahip olduğu görülmüştür. Buda sentezlenen BNNT’lerin önemini ve kalitesini arttırmaktadır.

Abstract

Boron nitride nanotubes (BNNTs) have many application areas thanks to their superior properties such as thermal and electrical insulation, resistance to oxidation, high hydrophobicity, and high hydrogen storage capacity, as well as biocompatible properties. Therefore, new synthesis methods are being searched for BNNT with increasing interest in recent years. In this study, high purity and yield BNNTs were synthesized using precursor materials and methods that were not previously tried in the literature. A chemical vapor storage (CVD) furnace was used for the synthesis, and various parameters were changed to achieve optimum conditions. The structure of the obtained BNNTs was characterized by Fourier conversion infrared spectroscopy (FTIR), Raman spectroscopy, and a UV-visible spectrophotometer. In addition, surface morphologies were illuminated using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). However, it has been observed that BNNTs obtained as a result of HR-TEM (high-resolution transmission electron microscope) analysis have a single-walled structure that is difficult to synthesize. This increases the importance and quality of synthesized BNNTs.

🔖

Bu Makaleye Atıf Yap

TARHAN, T. (2021). Yeni bir yöntem ve öncü maddeler ile bor nitrür nanotüplerin (BNNT'lerin) sentezi ve karakterizasyonu. Gümüşhane Üniversitesi Fen Bilimleri Dergisi, Cilt: 11 - Sayı: 4, 1217–1224. https://ajindex.com/articles/663390

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Ahmad, P., Khandaker, M.U., Amin, Y.M. and Khan, Z.R. (2015). Synthesis of boron nitride microtubes and formation of boron nitride nanosheets. Materials and Manufacturing Processes, 30, 184-188. https://doi.org/10.1080/10426914.2014.952041
  2. Ansaloni, L.M.S. and Sousa, E.M.B. (2013). Boron nitride nanostructured: synthesis, characterization and potential use in cosmetics. Materials Sciences and Applications, 4, 22-28. https://doi.org/10.4236/msa.2013.41004
  3. Arenal, R., Ferrari, A.C., Reich, S., Wirtz, L., Mevellec, J.-Y., Lefrant, S., Rubio, A. and Loiseau, A. (2006). Raman spectroscopy of single-wall boron nitride nanotubes. Nano Letters, 6(8), 1812-1816. https://doi.org/10.1021/nl0602544
  4. Bai, X.D., Golberg, D., Bando, Y., Zhi, C., Tang, C., Mitome, M. and Kurashima, K. (2007). Deformation-driven electrical transport of individual boron nitride nanotubes. Nano Letters, 7(3), 632-637. https://doi.org/10.1021/nl062540l
  5. Berber, S., Kwon, Y.-K. and Tomanek, D. (2000). Unusually high thermal conductivity of carbon nanotubes. Physical Review Letters, 84(29), 4613-4616. https://doi.org/10.1103/PhysRevLett.84.4613
  6. Cao, F., Ren, W., Ji, Y.-M. and Zhao, C. (2009). The structural and electronic properties of amine-functionalized boron nitride nanotubes via ammonia plasmas: a density functional theory study. Nanotechnology, 20(19, 145703. https://doi.org/10.1088/0957-4484/20/14/145703
  7. Chang, C.W.A., Fennimore, M., Afanasiev, A., Okawa, D., Ikuno, T., Garcia, H., Li, D., Majumdar, A. and Zettl, A. (2006). Isotope efect on the thermal conductivity of boron nitride nanotubes. Physical Review Letters, 97(8), 085901. https://doi.org/10.1103/PhysRevLett.97.085901
  8. Chang, C.W., Han, W.-Q. and Zettl, A. (2005). Termal conductivity of B-C-N and BN nanotubes. Journal of Vacuum Science & Technology B, 23(5), 1-3. https://doi.org/10.1116/1.2008266
  9. Chen, X., Wu, P., Rousseas, M., Okawa, D., Gartner, Z., Zettl, A. and Bertozzi, C.R. (2009). Boron nitride nanotubes are noncytotoxic and can be functionalized for interaction with proteins and cells. Journal of the American Chemical Society, 131(3), 890-891. https://doi.org/10.1021/ja807334b
  10. Ciofani, G. (2010). Potential applications of boron nitride nanotubes as drug delivery systems. Expert Opinion on Drug Delivery, 7(8), 889-893. https://doi.org/10.1517/17425247.2010.499897
  11. Ciofani, G., Raffa, V., Menciassi, A. and Cuschieri, A. (2009). Boron nitride nanotubes: an innovative tool for nanomedicine. Nano Today, 4(1), 8-10. https://doi.or