Dergiler / Tekstil ve Konfeksiyon / 2009 / Cilt: 19 - Sayı: 2

Handle properties of the woven fabrics made of compact yarns

Kompakt ipliklerden üretilmiş dokuma kumaşların tutum özellikleri

Sayfa
108–113
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak 30 farklı kumaş elde edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmanın amacı, kompakt eğrilmiş ipliklerden üretilen dokuma kumaşların tutum özelliklerine etki eden bazı faktörlerin incelenmesidir. 20 tex ve 12 tex iplik numaralarında %100 pamuklu kompakt iplikleriyle bezayağı, dimi ve saten doku tiplerinde kumaşlar üretilmiştir.
📊
Temel Bulgular & Veri:Sonuç olarak 30 farklı kumaş elde edilmiştir.
💡
Sonuç & Katkı:Kompakt eğrilmiş ipliklerle dokunan kumaşların tutum özelliklerine iplik numarasının, kumaş dokusunun ve terbiye işlemlerinin istatistiksel olarak önemli bir etkisinin olduğu belirlenmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışmanın amacı, kompakt eğrilmiş ipliklerden üretilen dokuma kumaşların tutum özelliklerine etki eden bazı faktörlerin incelenmesidir. 20 tex ve 12 tex iplik numaralarında %100 pamuklu kompakt iplikleriyle bezayağı, dimi ve saten doku tiplerinde kumaşlar üretilmiştir. Kumaşlar iki gruba ayrılmış ve gruplardan birine merserizasyon işlemi yapılmıştır. Merserizasyon işlemi görmüş kumaşlar, reaktif boyama ve reaktif baskı işlemlerinden geçirilmiştir. Merserizasyon işlemi görmemiş kumaşlar ise, reaktif boyama, reaktif baskı ve pigment baskı işlemlerinden geçirilmiştir. Sonuç olarak 30 farklı kumaş elde edilmiştir. Kumaşların tutum özelliklerini objektif olarak ölçmek amacıyla Shirley sertlik ölçer, dairesel eğilme ölçeri ve kalınlık ölçer test aletleri kullanılmıştır. Kompakt eğrilmiş ipliklerle dokunan kumaşların tutum özelliklerine iplik numarasının, kumaş dokusunun ve terbiye işlemlerinin istatistiksel olarak önemli bir etkisinin olduğu belirlenmiştir.

Abstract

The target of the current work is to examine the effects of different kinds of finishing treatments on the hand properties of the woven fabrics produced with compact spun yarns. Plain, twill and satin fabrics were produced with 100% cotton compact yarns in two yarn counts of 20 tex and 12 tex. All the fabrics were divided into two groups and mercerization process was applied to the one of the groups. The mercerized fabrics were dyed and printed with reactive dyestuffs. The other non mercerized groups of fabrics were divided into three such as reactive dyed, reactive printed and pigment printed. As a result, 30 different fabrics were obtained. In order to measure the handle properties of the fabrics objectively, Shirley stiffness tester, circular bending rigidity tester and thickness tester were used. It was determined that yarn count, fabric weave and finishing treatment have a statistically significant effect on handle properties of the fabrics woven with compact spun yarns.

🔖

Bu Makaleye Atıf Yap

ÜNAL, G. P., ÖZGÜNEY, A. T., ÖZÇELİK, G., ÖZERDEM, A., TAŞKIN, C. (2022). Handle properties of the woven fabrics made of compact yarns. Tekstil ve Konfeksiyon, Cilt: 19 - Sayı: 2, 108–113. https://ajindex.com/articles/596935

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Kawabata, S., Masako, N., 1994, “High Quality Fabrics for Garments”, International Journal of Clothing Science and Technology, Vol. 6 (5), pp.20-25
  2. Kawabata, S., Masako N., Yoshihiro, Y., 1999, “A guide line for manufacturing ideal fabrics”, International Journal of Clothing Science and Technology, Vol. 11(2/3), pp.134-140
  3. LI, Y. 2001, Clothing Comfort, “The Science of Clothing Comfort”, Edited by J. M. Layton, The Textile Institute, ISBN 1 870372247, Oxford UK., pp. 1-4 4. Vassiliadis, S., G., Venetsanos, D.T., Provatidis, C., G., 2005, “Optimization Aspects on the Hand of the Fabrics”, Textile Research Journal, Vol. 75(9), pp. 653-661 5. Vassiliadis S., Gurkan P., Kallivretaki A., Provatidis C., 2006, “Subjective Hand Evaluation of Fabrics Produced with Compact and Ring Spun Yarns”, 37th International Symposium on Novelties in Textiles, Ljubljana, Slovenia
  4. Saville B.P., 1999, Objective Evaluation of Fabric Handle, “Physical Testing of Textiles”, The Textile Institute, Woodhead Publishing Ltd., Cambridge-England., pp 256-259 7. Cay, A., Vassiliadis, S., 2006, “Effects of Warp-Weft Density Variation on Fabric Hand”, 37th International Symposium on Novelties in Textiles, Ljubljana, Slovenia
  5. Aliouche, D., Viallier, P., 2000, “Mechanical and Tactile Compression of Fabrics: Influence on Handle”, Textile Research Journal, Vol. 70 (11), pp. 939-944
  6. Yan, K., Höcker, H., Schafer, K., 2000, “Handle of Bleached Knitted Fabric Made from Fine Yak Hair”, Textile Research Journal, Vol. 70(8), pp. 734-738
  7. Manich, A.M., Martí, M., Saurí, R. M., Castellar M. D., 2006, “Effect of Finishing on Woven Fabric Structure and Compressional and Cyclic Multiaxial Strain Properties”, Textile Research Journal, Vol. 76(1), pp. 86-93
  8. Militky, J., Bajzik, V., “Influence of Washing/Ironing Cycles on Selected Properties of Cotton Type Weaves”, International Journal of Clothing Science and Technology, Vol. 9(3), pp. 193-199
  9. Mamalis, P., Andreopoulos, A., N. Spyrellis, 2001, “The Effect Of A Durable Flame-Retardant Finishing On The Mechanical Properties Of Cotton Knitted Fabrics”, International Journal of Clothing Science and Technology, Vol. 13 (2), pp. 132-144
  10. Mavruz, S., Ogulata, R.T., 2001, “Kompakt plik Egirme Teknolojisi ve Mevcut Deneyimler Isıgında Genel Degerlendirmesi”, Tekstil ve Konfeksiyon, Yıl:18(3), s:197-205
  11. Çeken, F., Göktepe, F., 2005, “Comparison of the Properties of Knitted Fabrics Produced by Conventional and Compact Ring-