Dergiler / Tekstil ve Konfeksiyon / 2012 / Cilt: 22 - Sayı: 3

A new adhesive coating solution based on a natural animal polymer - part II: Prediction of adhesion strength of the solution

Doğal hayvansal polimer esaslı yeni bir bağlayıcı polimer- bölüm II: Çözeltinin bağlanma mukavemetinin tahminlenmesi

Sayfa
231–239
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuçlar, bu çözeltinin bağlanma kapasitesini ortaya çıkarmış ve ılık suda bağlanma özelliğini koruyarak yeniden aktive edilebileceği ve çözeltinin yeniden aktive edilmesinin sıyrılma kuvvetini arttırdığını göstermiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Makalenin ikinci bölümü, doğal hayvansal polimer esaslı yeni bir çözeltinin bağlanma özelliklerinin araştırılmasını amaçlamaktadır.
📊
Temel Bulgular & Veri:Çözeltinin sıyrılma kuvvetinin matematiksel modellenmesi ve optimizasyonu, 22 faktöriyel düzeninde, döndürülebilir merkezi birleşik tasarımla gerçekleştirilmiştir.
💡
Sonuç & Katkı:Sonuçlar, bu çözeltinin bağlanma kapasitesini ortaya çıkarmış ve ılık suda bağlanma özelliğini koruyarak yeniden aktive edilebileceği ve çözeltinin yeniden aktive edilmesinin sıyrılma kuvvetini arttırdığını göstermiştir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Makalenin ikinci bölümü, doğal hayvansal polimer esaslı yeni bir çözeltinin bağlanma özelliklerinin araştırılmasını amaçlamaktadır. Çözeltinin sıyrılma kuvvetinin matematiksel modellenmesi ve optimizasyonu, 22 faktöriyel düzeninde, döndürülebilir merkezi birleşik tasarımla gerçekleştirilmiştir. Bağımsız değişkenler X1-çözeltiye bağlayıcı özellik kazandıran doğal hayvansal polimerin konsantrasyonu, X2- numuneler basınç altında iken, çözeltinin numunelere nüfuz etmesini sağlayan, numunelerin bağlanmasını etkileyen baskı süresi, bağımlı değişken Y-doğal hayvansal polimer esaslı çözeltinin bağlanma özelliği ile ilgili sıyrılma kuvvetidir. Dokunmuş kumaş numuneleri, hayvansal polimer esaslı çözelti ile bağlanmış ve çözeltinin bağlanma özelliğini test etmek için optimum sıyrılma kuvvetinin belirlemek amacıyla numuneler test edilmiştir. Sıyrılma kuvveti, genellikle bir bağlayıcının tutunma kuvvetinin ölçülmesi için kullanılmaktadır. Sonuçlar, bu çözeltinin bağlanma kapasitesini ortaya çıkarmış ve ılık suda bağlanma özelliğini koruyarak yeniden aktive edilebileceği ve çözeltinin yeniden aktive edilmesinin sıyrılma kuvvetini arttırdığını göstermiştir.

Abstract

The second part of the article pursues to research the adhesion properties of a new solution based on a natural animal polymer. Mathematical modeling and the optimization of the peel force of the solution were presented by the rotatable central composition design, enabled by the factorial program order 22. The independent variables were X1 – concentration of natural animal polymer, which gives adhesion properties of the solution, X2 – pressing time, which influences the bonding of the samples, while the samples stay pressed, allowing the solution to penetrate fabric samples, and dependent variable Y – peel force, which will give the adhesion properties of the solution based on a natural animal polymer. Woven fabric samples were bonded with the solution based on a natural animal polymer and the samples were tested to determine the optimum peel force to test the adhesion properties of the solution. Peel force is used to measure the adhesive bond strength of a material, typically an adhesive. The results show that this solution presents bonding capacity and can also be reactivated by immersion in warm water, preserving the adhesion and reactivation of the solution increase peel force.

🔖

Bu Makaleye Atıf Yap

AVRAM, D., BUDA, C., NEGRU, D. (2022). A new adhesive coating solution based on a natural animal polymer - part II: Prediction of adhesion strength of the solution. Tekstil ve Konfeksiyon, Cilt: 22 - Sayı: 3, 231–239. https://ajindex.com/articles/596863

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Poisson C, Hervais V, Lacrampe M.F., Krawczak P., 2006, “Optimization of PE/binder/PA extrusion blow-molded films. II. Adhesion properties improvement using binder/EVA blends”, Journal of Applied Polymer Science, Vol. 101(1), pp: 118–127
  2. Nenakhov S. A., 2007, “Basic Terms and Definitions in Adhesion”, Polymer Science, Series D. Glues and Sealing Materials, Publishing House Pleiades Publishing, Ltd., Vol. 1(1), pp: 19–22
  3. Gorbatkina Y.A., Ivanova-Mumjieva V.G., Lebedeva O.V., 2009, “Adhesion of modified polymers to fibres: Maxima on adhesive strength-modifier amount curves and the causes of their appearance”, International Journal of Adhesion & Adhesives, Vol. 29, pp: 9–17
  4. Been J.L., Bikales N.M., Bickerman J.J., Blomquist R.F., Moks E., Kovach G.P., et al., 1971, Adhesion and bonding, 1st ed. John Wiley & Sons Inc
  5. Leeden M.Cvd., Frens G., 2002, „Surface properties of plastic materials in relation to their adhering performance”, Advanced Engineering Materials, Vol. 4(5), pp: 280–289
  6. Hutchinson A.R. and Iglauer S., 2006, “Adhesion of construction sealants to polymer foam backer rod used in building construction”, International Journal of Adhesion and Adhesives, Vol. 26, pp: 555
  7. Mahlberg R., Niemi H.E.M., Denes F., Rowell R.M., 1998, “Adhesion of construction sealants to polymer foam backer rod used in building construction”, International Journal of Adhesion and Adhesives; Vol: 18(4), pp: 283–297
  8. Zhang J., Cole P., Nagpal U., Macosko C., Lodge T., 2006, “Direct correlation between adhesion promotion and coupling reaction at immiscible polymerpolymer interfaces”, The Journal of Adhesion, Vol: 82(9), pp: 887
  9. Yükseloğlu S.M. and Yöney H., 2009, “Bamboo fibre reinforced composite structures and their mechanical properties”, Tekstil ve Konfeksiyon, Vol. 19(4), pp: 61-64
  10. Macoveanu M., Nicu V., Curievici I., 1991, Bazele tehnologiei chimice. Metodologia elaborarii modelelor matematice ale proceselor din industria chimica, Publishing House Rotaprint, Technical University “Gh.Asachi”, Iasi, Romania
  11. Ciocoiu, M., 2002, Bazele statistico-matematice ale analizei şi controlul calităţii în industria textilă, Publishing House Performantica, Iasi, Romania.