Dergiler / Tekstil ve Konfeksiyon / 2013 / Cilt: 23 - Sayı: 3

Su geçirmez kumaşlardan yapılan ürünlere uygulanan montaj işleminin optimizasyonu

The optimization of the assemblies applied to products made of waterproof fabrics

Sayfa
273–279
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Optimizing the resistance conditions for the assemblies undertaking the thermo-adhesion process using thermo-adhesive tape were made by comparison with the standard sample, a fact which also results from the analysis of 2D histograms.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The paper presents the influence of the sealing parameters on the resistance of specific assemblies for clothing products made of waterproof materials.
📊
Temel Bulgular & Veri:Following these results, correlations were determined among three experimentally determined sizes using the Table Curve 3D program, the correlations were graphically presented by 3D charts and were analytically transcribed by regression equations to which was attached the value of the determination coefficient.
💡
Sonuç & Katkı:Optimizing the resistance conditions for the assemblies undertaking the thermo-adhesion process using thermo-adhesive tape were made by comparison with the standard sample, a fact which also results from the analysis of 2D histograms.
🔬Tür:Araştırma Makalesi
📍Kapsam:2002 Verileri
⚙️Değişkenler:Alan Parametreleri

Özet

The paper presents the influence of the sealing parameters on the resistance of specific assemblies for clothing products made of waterproof materials. The optimum sealing parameters namely temperature, work speed, the pressure of the roller and of the air were determined for double and triple laminated materials, using thermo-adhesive strips of the Sympatex and Gore-Tex type. Following these results, correlations were determined among three experimentally determined sizes using the Table Curve 3D program, the correlations were graphically presented by 3D charts and were analytically transcribed by regression equations to which was attached the value of the determination coefficient. The breaking load and the elongation were determined according to SR EN ISO 13934-1/2002 on the warp and weft direction. Following these results, correlations were determined between two experimentally determined sizes, namely: breaking load and temperature, elongation and temperature. The correlations between two sizes were performed using the Excel spreadsheet program, through graphic and analytical equations. Optimizing the resistance conditions for the assemblies undertaking the thermo-adhesion process using thermo-adhesive tape were made by comparison with the standard sample, a fact which also results from the analysis of 2D histograms.

Abstract

The paper presents the influence of the sealing parameters on the resistance of specific assemblies for clothing products made of waterproof materials. The optimum sealing parameters namely temperature, work speed, the pressure of the roller and of the air were determined for double and triple laminated materials, using thermo-adhesive strips of the Sympatex and Gore-Tex type. Following these results, correlations were determined among three experimentally determined sizes using the Table Curve 3D program, the correlations were graphically presented by 3D charts and were analytically transcribed by regression equations to which was attached the value of the determination coefficient. The breaking load and the elongation were determined according to SR EN ISO 13934-1/2002 on the warp and weft direction. Following these results, correlations were determined between two experimentally determined sizes, namely: breaking load and temperature, elongation and temperature. The correlations between two sizes were performed using the Excel spreadsheet program, through graphic and analytical equations. Optimizing the resistance conditions for the assemblies undertaking the thermo-adhesion process using thermo-adhesive tape were made by comparison with the standard sample, a fact which also results from the analysis of 2D histograms.

🔖

Bu Makaleye Atıf Yap

STAN, M., VLAD, L., BUHAI, C. (2022). Su geçirmez kumaşlardan yapılan ürünlere uygulanan montaj işleminin optimizasyonu. Tekstil ve Konfeksiyon, Cilt: 23 - Sayı: 3, 273–279. https://ajindex.com/articles/596829

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Mitu S. and Mitu M., 2005, „The Technology and the Characteristics of Sewed Seams”, Fundamental textile technology, Publishing Performantica, Iași, pp 231 - 369
  2. Mitu S. and Mitu M., 2005, “Unconventional Assemblies”, Fundamental textile technology, Publishing Performantica, Iaşi, pp 7 – 123
  3. Harnagea F., Harnagea C., Pastina M., 2011, “The strength of the composite textiles at sewing”, Tekstil ve Konfeksiyon, Vol: 21(3), pp: 285 – 293
  4. Matenciuc M., 2010, „Optimizing the Assembly Thickness of Genuine Leather Details”, The Leather and Shoes Magazine, Vol. 10(2), pp: 33 – 47
  5. Gürarda A., 2009, “The effect of seam parameters on the stiffness of woven fabrics”, Tekstil ve Konfeksiyon, Vol: 19(3), pp: 242 – 247
  6. Çitoğlu F., Yükseloğlu S., Akgün Kuyucu Y., 2011, “The study of stitch parametres on the effect of stitch strength on the polyester lining fabrics”, Tekstil ve Konfeksiyon, Vol: 21(1), pp: 82 – 86
  7. Dulgheriu I., Matenciuc C., 2011, “Optimizing the Sealing Parameters of Assemblies for Products Made of Composite Materials”, The Textile Industry, Vol: 62(4), pp. 209-213
  8. Wang X., Liu X. and Hurren C., 2008, “Physical and mechanical testing of textiles”, Fabric testing, Publishing Woodhead Limited, England, pp 90 – 123
  9. Won Y. and Seung A., 2004, „Mechanical properties of breathable waterproof fabrics with seaming and sealing processes”, Fibre and polymers, Vol:5(4), pp 316-320. 10. “Sealing seams”, General Directives for Functional Clothing Manufacturing, for Protection Against Harsh Weather Conditions,1999, pp. 15-18.