Dergiler / Teknik Dergi / 2022 / Cilt: 33 - Sayı: 4

Determination of Finite Element Modelling Errors for Box Culverts Using Field Load Tests

Sayfa
12309–12328
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

This study is aimed to highlighting the inherent error in numerical modelling of buried reinforced box culverts for design or rating purposes.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Buried culverts have been in service more than half a century and their age raises questions about their reliable serviceability for the new standard vehicles.
📊
Temel Bulgular & Veri:The gross weight and axle spacing of these trucks play an important role on the performance of the buried culverts where the culvert is covered with shallow fill heights.
💡
Sonuç & Katkı:This study is aimed to highlighting the inherent error in numerical modelling of buried reinforced box culverts for design or rating purposes.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:box culvert · field test · fill height

Özet

Buried culverts have been in service more than half a century and their age raises questions about their reliable serviceability for the new standard vehicles. The gross weight and axle spacing of these trucks play an important role on the performance of the buried culverts where the culvert is covered with shallow fill heights. Field live load tests were conducted by driving a loaded truck over some culverts at slow speed while recording data at the critical locations of these culvert. Finite element (FE) models were developed and calibrated using field load test results. Live load distribution formulations were adopted from AASHTO LRFD Bridge Design Specifications for different fill heights. Two- and three-dimensional FE models were modelled and loaded separately to compare the critical section forces. The results showed that the error using two different FE modelling approach yields more than 100% error for the maximum section forces when fill heights is between 60 cm and 120 cm. This study is aimed to highlighting the inherent error in numerical modelling of buried reinforced box culverts for design or rating purposes.

Abstract

Buried culverts have been in service more than half a century and their age raises questions about their reliable serviceability for the new standard vehicles. The gross weight and axle spacing of these trucks play an important role on the performance of the buried culverts where the culvert is covered with shallow fill heights. Field live load tests were conducted by driving a loaded truck over some culverts at slow speed while recording data at the critical locations of these culvert. Finite element (FE) models were developed and calibrated using field load test results. Live load distribution formulations were adopted from AASHTO LRFD Bridge Design Specifications for different fill heights. Two- and three-dimensional FE models were modelled and loaded separately to compare the critical section forces. The results showed that the error using two different FE modelling approach yields more than 100% error for the maximum section forces when fill heights is between 60 cm and 120 cm. This study is aimed to highlighting the inherent error in numerical modelling of buried reinforced box culverts for design or rating purposes.

🔖

Bu Makaleye Atıf Yap

ULGER, T. (2022). Determination of Finite Element Modelling Errors for Box Culverts Using Field Load Tests. Teknik Dergi, Cilt: 33 - Sayı: 4, 12309–12328. https://ajindex.com/articles/596552

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Abdel-Karim, A.M., Tadros, M.K. and Benak, J.V., Live Load Distribution on Concrete Box Culverts, Record No.1288; Transportation Research Board of the National Academy of Sciences, Washington, D.C., USA, 1990.
  2. McGrath, T., Liepins, A. and Beaver, J., Live load distribution widths for reinforced concrete box sections, 6th International Bridge Engineering Conference: Reliability, Security, and Sustainability in Bridge Engineering, Boston, MA, USA, July, 2005.
  3. Abolmaali, A., and Garg, A.K., Effect of wheel live load on shear behavior of precast reinforced concrete box culverts, Journal of Bridge Engineering, 13(1), 93–99, 2008.
  4. Wood, T.A., Lawson, W.D., Jayawickrama, P.W. and Newhouse, C., Evaluation of production models for load rating reinforced concrete box culverts, Journal of Bridge Engineering, 20(1), 4014057, 2015.
  5. Wood, T.A., Lawson, W.D., Surles, J.G., Jayawickrama, P.W. and Seo, H., Improved load rating of reinforced-concrete box culverts using depth-calibrated live-load attenuation”, Journal of Bridge Engineering, 21(12), 4016095, 2016.
  6. Orton, S.L., Loehr, J.E., Boeckmann, A. and Havens, G., Live-load effect in reinforced concrete box culverts under soil fill, Journal of Bridge Engineering, 20(11), 04015003, 2015.
  7. Negussey, D., Andrews, L., Singh, S. and Liu, C., Forensic investigation of a wide culvert reconstruction failure, Journal of Pipeline Systems Engineering and Practice, 10(3), 2019.
  8. Puppala, A.J., Ruttanaporamakul, P. and Congress, S.S.C., Design and construction of lightweight EPS geofoam embedded geomaterial embankment system for control of settlements, Geotextiles and Geomembranes, 47(3), 295–305, 2019.
  9. Wysokowski, A. (2021), Influence of single-layer geotextile reinforcement on load capacity of buried steel box structure based on laboratory full-scale tests, Thin-Walled Structures, 159, 107312, 2021.
  10. Kinchen, R.W., Temple, W.H., Lacinak, H.W. and Gueho, B.J., Evaluation of drainage pipe by field experimentation and supplemental laboratory experimentation, Report No. FHWA/LA-78/115; Louisiana Department of Transportation & Development, 1978.
  11. Garber, J.D., Lin, J.H. and Smith, L.G., Feasibility of Applying Cathodic Protection to Underground Culverts, Report No. FWWA/LA-91; Louisiana Department of Transportation & Development, Baton Rouge, LA, USA, 1991.
  12. Wadi, A., Pettersson, L. and Karoumi, R., FEM simulation of a full-scale loading-to-failure test of a corrugated steel culvert, Steel and Composite Structures, 27(2), 217–27, 2018.
  13. Xu, C