Dergiler / Teknik Dergi / 2022 / Cilt: 33 - Sayı: 4

Investigations of Exterior Wind Flow and Aerodynamic Coefficient around Y-Plan Shape Tall Building

Sayfa
12045–12065
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Further, this paper continues with the physics of wind flow behaviour around Y-plan shape building and flow character such as vortex formation, streamlines and identification of wake region for different wind angles.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In recent years, the construction of skyscrapers is emerging in many countries and the study on the behaviour of wind around the building receives an additional interest among structural engineers and architects.
📊
Temel Bulgular & Veri:The building model and wind velocity are scaled to the ratio 1:300 and 1:5 respectively.
💡
Sonuç & Katkı:Further, this paper continues with the physics of wind flow behaviour around Y-plan shape building and flow character such as vortex formation, streamlines and identification of wake region for different wind angles.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Aerodynamic forces · Computational Fluid Dynamics (CFD) · Wind tunnel

Özet

In recent years, the construction of skyscrapers is emerging in many countries and the study on the behaviour of wind around the building receives an additional interest among structural engineers and architects. Mostly, tall skyscrapers are planned in the shape of ‘Y’ in order to have a maximum exterior view and to support the central core of the structure. In the current scenario, it is important to study the actual wind load for irregular plan shape building. This paper presents the numerical wind flow simulation around ‘Y’ plan shape tall building using ANSYS Fluent software and validation is done using wind tunnel testing. The building model and wind velocity are scaled to the ratio 1:300 and 1:5 respectively. A wind velocity of 10 m/s is applied both for wind tunnel testing and for the numerical simulation. Error analysis is carried out in order to check the accuracy of the results obtained between wind tunnel and CFD. From the test results the mean Cp is investigated for various faces of the building for the wind angle 0˚, 45˚ and 90˚ from both using CFD and wind tunnel. The investigation of drag and lift coefficient is made on Y-plan shape building and it is observed that the maximum drag occurs at 45˚ wind angle, because of the less projected area when compared with the other wind angles 0˚ and 90˚ respectively. Further, this paper continues with the physics of wind flow behaviour around Y-plan shape building and flow character such as vortex formation, streamlines and identification of wake region for different wind angles.

Abstract

In recent years, the construction of skyscrapers is emerging in many countries and the study on the behaviour of wind around the building receives an additional interest among structural engineers and architects. Mostly, tall skyscrapers are planned in the shape of ‘Y’ in order to have a maximum exterior view and to support the central core of the structure. In the current scenario, it is important to study the actual wind load for irregular plan shape building. This paper presents the numerical wind flow simulation around ‘Y’ plan shape tall building using ANSYS Fluent software and validation is done using wind tunnel testing. The building model and wind velocity are scaled to the ratio 1:300 and 1:5 respectively. A wind velocity of 10 m/s is applied both for wind tunnel testing and for the numerical simulation. Error analysis is carried out in order to check the accuracy of the results obtained between wind tunnel and CFD. From the test results the mean Cp is investigated for various faces of the building for the wind angle 0˚, 45˚ and 90˚ from both using CFD and wind tunnel. The investigation of drag and lift coefficient is made on Y-plan shape building and it is observed that the maximum drag occurs at 45˚ wind angle, because of the less projected area when compared with the other wind angles 0˚ and 90˚ respectively. Further, this paper continues with the physics of wind flow behaviour around Y-plan shape building and flow character such as vortex formation, streamlines and identification of wake region for different wind angles.

🔖

Bu Makaleye Atıf Yap

RAJENDRAN, V., SHANMUGASUNDARAM, P. (2022). Investigations of Exterior Wind Flow and Aerodynamic Coefficient around Y-Plan Shape Tall Building. Teknik Dergi, Cilt: 33 - Sayı: 4, 12045–12065. https://ajindex.com/articles/596551

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. Yasushi Uematsu., Motohiko Yamada., Akira Inoue., Takeshi Hongo., Wind loads and wind-induced dynamic behavior of a single-layer latticed dome, J. of Wind Eng and Industrial Aerodynamics., 66(3), 227-248, 1997 [2] G, M, Richardson., R, P, Hoxey., A, P, Robertson., J, L, Short., The Silsoe Structures Building: Comparisons of pressures measured at full scale and in two wind tunnels, J of Wind Eng and Industrial Aerodynamics., 72, 187-197, 1997 [3] Chita Ganapathi, S., Harikrishna, P., Selvi Rajan, S., Effects of upstream terrain characteristics on aerodynamic coefficient of structures, Archives of Civil and Mechanical Engineering., 17(4), 776-785, 2017 [4] Ben Mou., Bao-Jie He., Dong-Xue Zhao., Kwok wing Chau., Numerical simulation of the effects of building dimensional variation on wind pressure distribution, Engineering Application of Computational Fluid Mechanics., 11, 293-309, 2017 [5] Gu, M., Quan, Y., Across-wind loads of typical tall buildings, J of Wind Eng and Industrial Aerodynamics., 92, 1147-1165, 2004 [6] Zhao Liu., Chaorong Zheng., Yue Wu., Richard G.J. Flay., Kan Zhang., Investigation on the effects of twisted wind flow on the wind loads on a square section megatall building, J of Wind Eng and Industrial Aerodynamics., 191, 127-141, 2019 [7] Ashutosh Sharma., Hemant Mittal., Ajay Gairola., Mitigation of wind load on tall building through aerodynamic modifications: Review, J. of Building Eng., 18, 180-194, 2018 [8] Kim Y., Kanda J., Characteristics of aerodynamic forces and pressures on square plan buildings with height variations, J of Wind Eng and Industrial Aerodynamics., 98, 449-465, 2010 [9] Biswarup Bhattacharyya., Sujit Kumar Dalui., Investigation of mean wind pressure on E plan shaped tall building. Wind and structures., 26(2), 99-114, 2018 [10] Rajdip paul and Sujit kumar dalui, Wind effects on ’Z’ plan-shaped tall byulding: a case study, Int J Adv Struct Eng., 8, 319-335, 2016 [11] W.P. Jones and B.E Launder, The prediction of laminarization with a two equation model of turbulance, Int. Journal of Heat and Mass transfer., 15, 301-314, 1972 [12] Hargreaves, D, M., Wright, N, G., On the use of the k-𝜀 model in commercial CFD software to model the neutral atmospheric boundary layer, J of Wind Eng and Industrial Aerodynamics., 95, 355-369, 2007 [13] Franke, J., Hellsten, A Schlunzen, K, H., Carissimo, B., The COST 732 Best practice Gudelines for CFD simulation of flow in urban Environment: A summary, International J of Environment and