Dergiler / Tarım Bilimleri Dergisi / 2021 / Cilt: 27 - Sayı: 3

Production of Agricultural Biodegradable Mulch and Evaluation it through Heat and Moisture Distribution in Soil

Sayfa
360–372
Yayın Tarihi
2022-10-17
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The amount of moisture reduction for dark and uncoated mulch by moving from surface to depth was far more when compared to other mulches, and there was no significant change at the depth of transparent mulches.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The need to increase agricultural production in proportion to population growth and water crisis management requires initiatives that can increase the quantity and quality of crops by using soil moisture storage methods while preserving the environment.
📊
Temel Bulgular & Veri:The average molecular weight, the gel content and the percentage of elongation at the breakpoint for biodegradable mulches were 4906.56 g mol-1, 4.68% and 4.63%, respectively and the mean values of tensile strength and the percentage of elongation before the ultraviolet aging process were 13.41MPa and 396.71%, respectively.
💡
Sonuç & Katkı:The amount of moisture reduction for dark and uncoated mulch by moving from surface to depth was far more when compared to other mulches, and there was no significant change at the depth of transparent mulches.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Response surface method · Soil moisture · Soil temperature

Abstract

The need to increase agricultural production in proportion to population growth and water crisis management requires initiatives that can increase the quantity and quality of crops by using soil moisture storage methods while preserving the environment. According to problem presented, in order to simulate the temperature, humidity and radiation of the farm environment, a control system, along with laboratory facilities were designed and constructed. Then, the production and evaluation of different types of soil mulches from biodegradable and petroleum polymers were performed by aiming investigate the effect of these soil mulches on soil temperature and moisture at different depths. Produced mulches were placed in a laboratory soil bed. The average molecular weight, the gel content and the percentage of elongation at the breakpoint for biodegradable mulches were 4906.56 g mol-1, 4.68% and 4.63%, respectively and the mean values of tensile strength and the percentage of elongation before the ultraviolet aging process were 13.41MPa and 396.71%, respectively. Acceptable values of statistical indicators were calculated with the response surface method. In conclusion of the soil temperature and humidity changes for different types of mulch, the velocity of temperature rise is reduced in deep levels due to the resistance made by soil moisture. The amount of moisture reduction for dark and uncoated mulch by moving from surface to depth was far more when compared to other mulches, and there was no significant change at the depth of transparent mulches.

🔖

Bu Makaleye Atıf Yap

KHOJASTEHPOUR, M., SADRNIA, H., SHAHABI, M. (2022). Production of Agricultural Biodegradable Mulch and Evaluation it through Heat and Moisture Distribution in Soil. Tarım Bilimleri Dergisi, Cilt: 27 - Sayı: 3, 360–372. https://ajindex.com/articles/594682

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Akrami, M, Ghasemi, I, Azizi, H, Karrabi, M, Seyedabadi, M (2016). A new approach in compatibilization of the poly (lactic acid)/thermoplastic starch (PLA/TPS) blends. Carbohydrate Polymers 144: 254-262.
  2. ASTM (2004). D 6954. Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation. ASTM (2006). D 2765-01. Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics. West Conshohocken. ASTM (2014). D 5208-14. Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics. West Conshohocken. ASTM (2018). D 3826-18. Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test. West Conshohocken. Bas, D, Boyaci, IH (2007). Modeling and optimization II: comparison of estimation capabilities of response surface methodology with artificial neural networks in a biochemical reaction. Journal of Food Engineering 78(3): 846-854.
  3. Boborodea, A, Collignon, F, Brookes, A (2015). Characterization of Polyethylene in Dibutoxymethane by High-Temperature Gel Permeation Chromatography with Triple Detection. International Journal of Polymer Analysis and Characterization 20(4): 316-322.
  4. Braunack, M, Johnston, D, Price, J, Gauthier, E (2015). Soil temperature and soil water potential under thin oxodegradable plastic film impact on cotton crop establishment and yield. Field Crops Research 184: 91-103.
  5. Briassoulis, D (2004). An overview on the mechanical behaviour of biodegradable agricultural films. Journal of Polymers and the Environment 12(2): 65-81.
  6. Briassoulis, D (2006). Mechanical behaviour of biodegradable agricultural films under real field conditions. Polymer Degradation and Stability 91(6): 1256-1272.
  7. Coto, B, Escola, JM, Suárez, I, Caballero, MJ (2007). Determination of dn/dc values for ethylene–propylene copolymers. Polymer testing 26(5): 568-575. Díaz-Pérez, JC, Gitaitis, R, Mandal, B (2007). Effects of plastic mulches on root zone temperature and on the manifestation of tomato spotted wilt symptoms and yield of tomato. Scientia Horticulturae 114(2): 90-95.
  8. Fattahi, FS (2015).
  9. Review on Production, Properties, and Applications of Poly(lactic acid) Fibers. Journal of Textile Science and Technology 5(1): 11-17.
  10. Ham, JM, Kluitenberg, G (1994). Modeling the effect of mulch optical properties and mulch-soil contact resistance on soil heating under plastic mulch culture. Agric