KaydedilenlerDerginizi ekleyin

Dergiler / Journal of Thermal Engineering / 2020 / Cilt: 6 - Sayı: 6

THERMODYNAMIC AND ENVIRONMENTAL COMPARATIVE INVESTIGATION AND OPTIMIZATION OF LANDFILL VS. INCINERATION FOR MUNICIPAL SOLID WASTE: A CASE STUDY IN VARAMIN, IRAN

Amir Ghasemi
Mehrnoosh Moghaddam
Sayfa
226–246
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Also, optimization results show that thermal and exergy effectiveness for landfill system are improved by 7.01% and 6.53% respectively; these values for incineration system are calculated to be 45.35% and 92.75% respectively.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Waste to energy (WtE) introduces an appropriate solution for municipal solid waste (MSW) disposal and greenhouse gas emission reduction.
📊
Temel Bulgular & Veri:As a result, Furnace in incineration system and Combustion Chamber in landfill system have the most exergy destruction rate.
💡
Sonuç & Katkı:Also, optimization results show that thermal and exergy effectiveness for landfill system are improved by 7.01% and 6.53% respectively; these values for incineration system are calculated to be 45.35% and 92.75% respectively.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Waste to Energy · Environmental Analysis · Landfill Plant

Abstract

Waste to energy (WtE) introduces an appropriate solution for municipal solid waste (MSW) disposal and greenhouse gas emission reduction. In this study, for Varamin MSW management, a gas turbine plant with heat recovery unit that is fed by landfill gas (LFG) and combined heat and power (CHP) incineration plant is investigated and compared as two WtE systems to reveal the best plant effectively. Exergy and environmental analyses of two systems are performed. Moreover, the effects of key parameters as decision variables on the energy and exergy efficiencies are identified by sensitive analysis of both systems. Multi-objective optimization of thermal and exergy efficiencies are then done by using Genetic Algorithm (GA) for each studied system. As a result, Furnace in incineration system and Combustion Chamber in landfill system have the most exergy destruction rate. Also, optimization results show that thermal and exergy effectiveness for landfill system are improved by 7.01% and 6.53% respectively; these values for incineration system are calculated to be 45.35% and 92.75% respectively.

🔖

Bu Makaleye Atıf Yap

Ghasemi, A., Moghaddam, M. (2022). THERMODYNAMIC AND ENVIRONMENTAL COMPARATIVE INVESTIGATION AND OPTIMIZATION OF LANDFILL VS. INCINERATION FOR MUNICIPAL SOLID WASTE: A CASE STUDY IN VARAMIN, IRAN. Journal of Thermal Engineering, Cilt: 6 - Sayı: 6, 226–246. https://ajindex.com/articles/566714

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Tumen Ozdil NF, Pekdur A. Energy and exergy assessment of a cogeneration system in food industry: A case study. Int J Exergy 2016. doi:10.1504/IJEX.2016.076866
  2. Tumen Ozdil NF, Tantekin A, Erbay Z. Energy and exergy analyses of a fluidized bed coal combustor steam plant in textile industry. Fuel 2016. doi:10.1016/j.fuel.2016.06.091
  3. Özdil NF, Tantekin A, Pekdur A. Performance assessment of a cogeneration system in food industry. J Therm Eng 2018. doi:10.18186/journal-of-thermal-engineering.382412
  4. Tantekin A, Özdil NF. Thermodynamic analysis of a fluidized bed coal combustor steam plant in textile industry. J Therm Eng 2017. doi:10.18186/journal-of-thermal-engineering.353690
  5. Tumen Ozdil NF, Tantekin A. Exergy and exergoeconomic assessments of an electricity production system in a running wastewater treatment plant. Renew Energy 2016. doi:10.1016/j.renene.2016.05.039
  6. Ghaebi H, Abbaspour G. Performance analysis and thermodynamic modeling of a poly generation system by integrating a multi-effect-desalination thermo-vapor compression (MED-TVC) system with a combined cooling, heating and power (CCHP) system. J Therm Eng 2018. doi:10.18186/journal-of-thermal-engineering.410264
  7. Thornley P, Upham P, Huang Y, Rezvani S, Brammer J, Rogers J. Integrated assessment of bioelectricity technology options. Energy Policy 2009. doi:10.1016/j.enpol.2008.10.032
  8. Bove R, Lunghi P. Electric power generation from landfill gas using traditional and innovative technologies. Energy Convers Manag 2006. doi:10.1016/j.enconman.2005.08.017
  9. Sun L, Fujii M, Tasaki T, Dong H, Ohnishi S. Improving waste to energy rate by promoting an integrated municipal solid-waste management system. Resour Conserv Recycl 2018. doi:10.1016/j.resconrec.2018.05.005
  10. Xydis G, Nanaki E, Koroneos C. Exergy analysis of biogas production from a municipal solid waste landfill. Sustain Energy Technol Assessments 2013. doi:10.1016/j.seta.2013.08.003
  11. Trindade AB, Carlos J, Palacio E, González AM, Rúa Orozco DJ, Silva Lora EE, et al. Advanced exergy analysis and environmental assesment of the steam cycle of an incineration system of municipal solid waste with energy recovery. Energy Convers Manag 2018
  12. Azami S, Taheri M, Pourali O, Torabi F. Energy and exergy analyses of a mass-fired boiler for a proposed waste-to-energy power plant in Tehran. Appl Therm Eng 2018. doi:10.1016/j.applthermaleng.2018.05.045
  13. Leckner B. Process aspects in combustion and gasific