Finally, experimental modal analysis (EMA) and FEA results were compared.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study; the weight of the modal accelerometer used in the Roving Hammer Impact Test Method was added in the finite element analysis (FEA) and the undamped modal analysis of the automotive rear lamp lenses were performed.
📊
Temel Bulgular & Veri:Also, calculated new Elastic Modulus for Polymethylmethacrylate (PMMA) material with using natural frequency formula and this value was used in the ANSYS WB program and the undamped modal analysis was repeated.
💡
Sonuç & Katkı:Finally, experimental modal analysis (EMA) and FEA results were compared.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Automotive Rear Lamp · Finite Element Analysis · Frequency Response Function (FRF)
Abstract
In this study; the weight of the modal accelerometer used in the Roving Hammer Impact Test Method was added in the finite element analysis (FEA) and the undamped modal analysis of the automotive rear lamp lenses were performed. Also, calculated new Elastic Modulus for Polymethylmethacrylate (PMMA) material with using natural frequency formula and this value was used in the ANSYS WB program and the undamped modal analysis was repeated. After that, frequency response functions (FRFs) of an automotive rear lamp lens were obtained by using Roving Hammer Impact Test Method. At the same time; dynamic characteristics of the structure, natural frequencies, damping ratios and mode shapes were obtained. Damping ratios were calculated from the FRF’s by using the Half Power Method. Finally, experimental modal analysis (EMA) and FEA results were compared.
Çetin, S. T., Ay, E., Ediz, B., Çal, T. (2022). Calculation of the Modulus of Elasticity with Using Natural Frequency Formula and Updated Finite Element Analysis Of Automotive Rear Lamp Lens. International Journal of Automotive Science and Technology, Cilt: 3 - Sayı: 2, 27–31. https://ajindex.com/articles/540535
Bayraktar. P., Türker. T. (2005). Deneysel modal analiz yöntemi ile düzlem çerçevelerin dinamik karakteristiklerin belirlenmesi. Deprem Sempozyumu, 23-25 Mart 2005, Kocaeli
Ay, E., Ediz, B, Çal. T., Telli Çetin., S. (2019). Modal analysis of automotive rear lamp lens produced from plastic material. European Mechanical Science (under review)
Anonymous, How to calculate damping from a FRF?.
Meirovitch, L. (2001). Fundamentals of vibrations. McGraw-Hill Higher Education. Singapore.