KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Automotive Science and Technology / 2020 / Cilt: 4 - Sayı: 4

A numerical study on processes of charge and discharge of latent heat energy storage system using RT27 paraffin wax for exhaust waste heat recovery in a SI engine

Habib GÜRBÜZ
Durukan ATEŞ
Sayfa
314–327
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, at designed LHTES system and numerical analysis performed for RT27 paraffin wax under boundary conditions, the process of heat charge (melting) completed at 8000.sec with 93% liquid-fraction, while the process of heat discharge (solidification) completed at 55000.sec with 15% liquid-fraction.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In the present paper, the numerical analyses of the heat charge and discharge processes of the latent heat energy storage (LHTES) system designed for the recovery of the exhaust waste heat energy of the SI engine presented.
📊
Temel Bulgular & Veri:In the LHTES system as phase change material (PCM), the charge and discharge ability of paraffin wax commercially identified with code RT27 were analyzed depending on time.
💡
Sonuç & Katkı:As a result, at designed LHTES system and numerical analysis performed for RT27 paraffin wax under boundary conditions, the process of heat charge (melting) completed at 8000.sec with 93% liquid-fraction, while the process of heat discharge (solidification) completed at 55000.sec with 15% liquid-fraction.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Latent heat energy storage · Serpentine tube heat exchanger · Exhaust easte heat recovery

Abstract

In the present paper, the numerical analyses of the heat charge and discharge processes of the latent heat energy storage (LHTES) system designed for the recovery of the exhaust waste heat energy of the SI engine presented. In the LHTES system as phase change material (PCM), the charge and discharge ability of paraffin wax commercially identified with code RT27 were analyzed depending on time. Two closed-loop fluid circulation system consisting of two heat exchangers (HESs) was designed, someone connected to the exhaust path of SI engine for waste heat recovery, and the other used for the charging and discharging of waste heat energy in the PCM. To transfer the waste heat from the hot exhaust gases to the PC, cold water was used as the heat carrier fluid. In the numerical analysis, the exhaust gas temperature and flow rate values of a single-cylinder, air-cooled having a stroke volume of 476.5 cm3 SI engine operated with gasoline at 1600 rpm engine speed and 1/2 throttle position were used. As a result, at designed LHTES system and numerical analysis performed for RT27 paraffin wax under boundary conditions, the process of heat charge (melting) completed at 8000.sec with 93% liquid-fraction, while the process of heat discharge (solidification) completed at 55000.sec with 15% liquid-fraction.

🔖

Bu Makaleye Atıf Yap

GÜRBÜZ, H., ATEŞ, D. (2022). A numerical study on processes of charge and discharge of latent heat energy storage system using RT27 paraffin wax for exhaust waste heat recovery in a SI engine. International Journal of Automotive Science and Technology, Cilt: 4 - Sayı: 4, 314–327. https://ajindex.com/articles/540511

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Farid, M.M., Khudhair, A.M., Razack, S.A.K. and Hallaj, S.A. (2004). A review on phase Change energy storage: materials and applications. Energy Conversion and Management. 45, 1597-1615
  2. Hatami, M., Ganji, D.D. and Gorji-Bandpy M. (2014). A review of different heat exchangers designs for increasing the diesel exhaust waste heat recovery. Renewable Sustainable Energy Reviews. 37, 168-181
  3. Hasanuzzaman, M. Rahim, N.A., Saidur, R. and Kazi, S.N. (2011). Energy savings and emissions reductions for rewinding and replacement of industrial motor, Energy. 36(1), 233-240
  4. Gürbüz, H. and Demirtürk S. (2020). Investigation of dual-fuel combustion by different port injection fuels (neat ethanol and E85) in a DE95 diesel/ethanol blend fuelled CI engine. Journal of Energy Resources Technology. 142(12):122306
  5. Gürbüz, H., Demirtürk, S., Akçay, İ.H. and Akçay, H. (2020). Effect of port injection of ethanol on engine performance, exhaust emissions and environmental factors in a dual-fuel diesel engine, Energy and Environment,
  6. Gürbüz, H., Şöhret, Y. and Akçay, H., (2019). Environmental and Enviroeconomic Assessment of an LPG Fueled SI Engine at Partial Load. Journal of Environmental Management. 241, 631-636
  7. Balakrishna, B. and Mamidala, S. (2014). Design optimization of catalytic converter to reduce particulate matter and achieve limited back pressure in diesel engine by CFD. International Journal of Current Engineering and Technology. 2, 651-658
  8. Patil, A.A., Navale, L.G. and Patil, V.S. (2013). Simulative analysis of single cylinder four stroke C.I. engine exhaust system. International Journal of Science, Spirituality, Business and Technology. 2(1), 79-82
  9. Hatami, M., Boot, M.D., Ganji, D.D. and Gorji-Bandpy M. (2015). Comparative study of different exhaust heat exchangers effect on the performance and exergy analysis of a diesel engine, Applied Thermal Engineering. 90, 23-37
  10. Hatami, M., Ganji, D.D. and Gorji-Bandpy M., (2015). Experimental and numerical analysis of the optimized finned-tube heat exchanger for OM314 diesel exhaust exergy recovery. Energy Conversion and Management. 97, 26-41
  11. Barba, A. and Spiga, M. (2013). Discharge mode for encapsulated PCMs in storage tanks, Solar Energy. 74, 141–148
  12. Dhaidan, N.S. (2017). Nanostructures assisted melting of phase change materials in various cavities. Applied Thermal Engineering.111,193-212
  13. Cui, Y., Xie, J., Liu, J., Wang