Dergiler / Hacettepe Journal of Biology and Chemistry / 2022 / Cilt: 50 - Sayı: 2

Reaktif turuncu 16 boyasının, katalizör olarak manyetik nano boyutlu kil kullanılarak heterojen Fenton prosesi ile parçalanması: Bir Merkezi kompozit optimizasyon çalışması

Degradation of Reactive Orange 16 dye with heterogeneous Fenton Process using magnetic nano-sized clay as catalyst: A central composite optimization study

Sayfa
113–129
Yayın Tarihi
2022-10-17
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

RO16'nın sulu ortamlardan başarılı bir şekilde uzaklaştırılması, Fe3O4/MMT kullanılarak heterojen Fenton prosesi ile mümkündür.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada Fe3O4/montmorillonit, sulu çözeltilerden Reaktif turuncu 16 (RO16) 'nın Kimyasal Oksijen İhtiyacı(KOİ)’na dayalı uzaklaştırılması için heterojen bir fenton katalizörü olarak sentezlenmiştir.
📊
Temel Bulgular & Veri:H2O2 konsantrasyonu, katalizör dozu, pH ve reaksiyon süresi gibi sistem parametreleri, Merkezi Kompozit Tasarım(MKT) temelinde sayısal olarak optimize edildi.
💡
Sonuç & Katkı:RO16'nın sulu ortamlardan başarılı bir şekilde uzaklaştırılması, Fe3O4/MMT kullanılarak heterojen Fenton prosesi ile mümkündür.
🔬Tür:Deneysel Tarla Denemesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Fe3O4/MMT · anionic dye · heterogeneous Fenton

Özet

Bu çalışmada Fe3O4/montmorillonit, sulu çözeltilerden Reaktif turuncu 16 (RO16) 'nın Kimyasal Oksijen İhtiyacı(KOİ)’na dayalı uzaklaştırılması için heterojen bir fenton katalizörü olarak sentezlenmiştir. H2O2 konsantrasyonu, katalizör dozu, pH ve reaksiyon süresi gibi sistem parametreleri, Merkezi Kompozit Tasarım(MKT) temelinde sayısal olarak optimize edildi. Katalizör, X-ışını kırınımı(XRD), Fourier dönüşümlü kızılötesi spektroskopisi(FTIR), taramalı elektron mikroskobu(SEM), enerji Dağılımlı X-ışını Spektroskopisi(EDX), Transmisyon elektron mikroskobu(TEM), dinamik ışık saçılımı(DLS), ζ potansiyeli ve Brunauer-Emmett-Teller(BET) ile karakterize edildi. Adsorpsiyon prosesi, RO16'nın uzaklaştırılmasında katkıda bulundu, ancak heterojen Fenton prosesi büyük bir paya sahipti ve adsorpsiyon prosesinden daha hızlı gerçekleşti. Optimum koşullar katalizör dozajı: 1.83 (g/L), H2O2 konsantrasyonu: 77.98 (mM), pH: 3 ve reaksiyon süresi: 60 dakika olarak belirlendi. Bu koşullar altında KOİ giderim verimi modelden% 84.82 olarak tahmin edidi ve deneysel olarak % 85.90 bulundu. RO16'nın sulu ortamlardan başarılı bir şekilde uzaklaştırılması, Fe3O4/MMT kullanılarak heterojen Fenton prosesi ile mümkündür.

Abstract

In this study, Fe3O4/montmorillonite was synthesized as a heterogeneous Fenton catalyst for the removal of Reactive Orange 16 (RO16) from aqueous solutions based on chemical oxygen demand (COD). System parameters such as H2O2 concentration, catalyst dose, pH, and reaction time were numerically optimized based on Central Composite Design (CCD). The catalyst was characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), dynamic light scattering (DLS), ζ potential, and Brunauer-Emmett-Teller (BET). The adsorption process contributed to the removal of RO16 but the heterogeneous Fenton process had a higher share and occurred faster than the adsorption process. Optimum conditions were determined as catalyst dosage:1.83 (g/L), H2O2 concentration:77.98 (mM), pH:3, and reaction time:60 min. Under these conditions, COD removal efficiency estimated from the model was 84.82% and found experimentally was 85.90%. Successful removal of RO16 from aqueous environments is possible with a heterogeneous Fenton process using Fe3O4/MMT.

🔖

Bu Makaleye Atıf Yap

ÖZTÜRK, D. (2022). Reaktif turuncu 16 boyasının, katalizör olarak manyetik nano boyutlu kil kullanılarak heterojen Fenton prosesi ile parçalanması: Bir Merkezi kompozit optimizasyon çalışması. Hacettepe Journal of Biology and Chemistry, Cilt: 50 - Sayı: 2, 113–129. https://ajindex.com/articles/528904

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. D. Ozturk, T. Sahan, T. Bayram, A. Erkus, Application of Response Surface Methodology (Rsm) To Optimize the Adsorption Conditions of Cationic Basic Yellow 2 Onto Pumice Samples As a New Adsorbent, Fresenius Environ. Bull. 26 (2017) 3285–3292.
  2. T.A. Egerton, H. Purnama, Does hydrogen peroxide really accelerate TiO2 UV-C photocatalyzed decolouration of azo-dyes such as Reactive Orange 16?, Dye. Pigment. (2014). https://doi.org/10.1016/j.dyepig.2013.10.019.
  3. P. Ilgın, Adsoption of Cationic Dye on Anionic Hydrogel and Its Second Use for Drug Delivery with Antibacterial Properties, Hacettepe J. Biol. Chem. 4 (2018) 577–591. https://doi.org/10.15671/HJBC.2018.264.
  4. D. Ozturk, A.E. Yilmaz, Investigation of electrochemical degradation of Basic Red 13 dye in aqueous solutions based on COD removal: numerical optimization approach, Int. J. Environ. Sci. Technol. 17 (2020) 3099–3110. https://doi.org/10.1007/s13762-020-02692-2.
  5. A. Akhtar, Z. Aslam, A. Asghar, M.M. Bello, A.A.A. Raman, Electrocoagulation of Congo Red dye-containing wastewater: Optimization of operational parameters and process mechanism, J. Environ. Chem. Eng. 8 (2020) 104055. https://doi.org/10.1016/j.jece.2020.104055.
  6. F.M. Gunawan, D. Mangindaan, K. Khoiruddin, I.G. Wenten, Nanofiltration membrane cross-linked by m -phenylenediamine for dye removal from textile wastewater, Polym. Adv. Technol. 30 (2019) 360–367. https://doi.org/10.1002/pat.4473.
  7. H. Qian, Q. Hou, G. Yu, Y. Nie, C. Bai, X. Bai, M. Ju, Enhanced removal of dye from wastewater by Fenton process activated by core-shell NiCo2O4@FePc catalyst, J. Clean. Prod. 273 (2020) 123028. https://doi.org/10.1016/j.jclepro.2020.123028.
  8. Y.S. Woo, M. Rafatullah, A.F.M. Al-Karkhi, T.T. Tow, Removal of Terasil Red R dye by using Fenton oxidation: a statistical analysis, Desalin. Water Treat. 52 (2014) 4583–4591. https://doi.org/10.1080/19443994.2013.804454.
  9. D. Ozturk, A.E. Yilmaz, Treatment of slaughterhouse wastewater with the electrochemical oxidation process: Role of operating parameters on treatment efficiency and energy consumption, J. Water Process Eng. 31 (2019). https://doi.org/10.1016/j.jwpe.2019.100834.
  10. P. Hou, C. Shi, L. Wu, X. Hou, Chitosan/hydroxyapatite/Fe3O4 magnetic composite for metal-complex dye AY220 removal: Recyclable metal-promoted Fenton-like degradation, Microchem. J. 128 (2016) 218–225. https://doi.org/10.1016/j.microc.2016.04.022.
  11. N.C. Fernandes, L.B. Brito, G.G. Costa, S.F. Taveira, M.S.S. Cunha-Filho, G.A.R. Oliveira, R.N. Marreto, R