Dergiler / Gümüşhane Üniversitesi Fen Bilimleri Dergisi / 2020 / Cilt: 10 - Sayı: 3

Development of Filament Winding Machine for Producing Round Shapes with Different Fiber Reinforcements

Farklı Elyaf Takviyeleri ile İçi Oyuk Şekiller Üretmek İçin Elyaf Sarma Makinesi Geliştirmesi

Sayfa
552–558
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The fiber reinforced specimens were manufactured according to different winding angles, fiber reinforcements and cross sections.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In recent years, fiber reinforced composite structures have become an important engineering subject because they are preferred due to their high strength / weight and stiffness / weight ratios in many industrial fields such as aerospace, construction, defense, aviation, automotive and energy.
📊
Temel Bulgular & Veri:In this study, a filament winding machine having 2-axis motion was designed and constructed for the fabrication of different types of fiber reinforced composite pipes.
💡
Sonuç & Katkı:The fiber reinforced specimens were manufactured according to different winding angles, fiber reinforcements and cross sections.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Composite Materials · Construction and Control of Winding Machine · Design

Özet

In recent years, fiber reinforced composite structures have become an important engineering subject because they are preferred due to their high strength / weight and stiffness / weight ratios in many industrial fields such as aerospace, construction, defense, aviation, automotive and energy. Although different methods are present to produce of these materials, the most reliable way is the filament winding technique. The basic principle of the filament winding technique is based on that the fiber reinforcement impregnated by resin is wrapped on a rotary mandrel using carriage translation and mandrel rotation motions. In this study, a filament winding machine having 2-axis motion was designed and constructed for the fabrication of different types of fiber reinforced composite pipes. The machine is capable of producing specimens in different design parameters such as dimensions up to 750 mm length and 250 mm diameter, different winding angles for hoop, helical and polar winding types. The fiber reinforced specimens were manufactured according to different winding angles, fiber reinforcements and cross sections.

Abstract

Son yıllarda, elyaf takviyeli oyuk kompozit yapılar, havacılık, inşaat, savunma, uzay, otomotiv ve enerji gibi birçok endüstriyel alanda sağladıkları yüksek dayanım/ağırlık ve direngenlik/ağırlık oranlarından dolayı tercih edilmeleri nedeniyle önemli bir mühendislik konusu haline geldi. Bu malzemelerin üretilmesinde farklı yöntemler mevcut olmasına rağmen, en güvenilir yöntem filament sarım tekniğidir. Filament sarım tekniğinin temel prensibi, reçine ile emprenye edilen elyaf takviyesinin, taşıyıcı çeviri ve mandrel dönüş hareketleri kullanılarak döner bir mandrel üzerine sarılmasıdır. Bu çalışmada, farklı tiplerde fiber takviyeli kompozit boruların üretimi için 2 eksenli harekete sahip bir filaman sarma makinesi tasarlandı ve üretildi. Makine, numunelerin 750 mm uzunluğa ve 250 mm çapa kadar boyutlar, sarmal, kasnak ve kutup sargı tipleri için farklı sarım açıları gibi farklı tasarım parametrelerinde üretme kabiliyetine sahiptir. Elyaf takviyeli örnekler, farklı sarım açıları, elyaf takviyeleri ve enine kesitlere göre üretildi.

🔖

Bu Makaleye Atıf Yap

KILIÇ, A., ÖZBEK, Ö., BOZKURT, Ö. Y. (2022). Development of Filament Winding Machine for Producing Round Shapes with Different Fiber Reinforcements. Gümüşhane Üniversitesi Fen Bilimleri Dergisi, Cilt: 10 - Sayı: 3, 552–558. https://ajindex.com/articles/526934

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Abdalla, F.H., Mutasher, S.A., Khalid, Y.A., Sapuan, S.M., Hamouda, A.M.S., Sahari, B.B., Hamdan, M.M., 2007. Design and Fabrication of Low Cost Filament Winding Machine. Materials & Design, 28(1), 234-239.
  2. Bulut, M., 2020. Low-Velocity Impact Tests on Basalt Fiber/Polypropylene Core Honeycomb Sandwich Composites. Mechanics of Composite Materials, 1-10.
  3. Gay, D., 2014. Composite Materials: Design and Applications: CRC Press, Taylor & Francis Group, 6000 Broken Sound Parkway NW, USA. Gemi, L., Morkavuk, S., Köklü, U., & Gemi, D.S., 2019. An Experimental Study on the Effects of Various Drill Types on Drilling Performance of GFRP Composite Pipes and Damage Formation. Composites Part B: Engineering, 172, 186-194.
  4. Gemi, L., Köklü, U., Yazman, Ş., Morkavuk, S., 2020. The Effects of Stacking Sequence on Drilling Machinability of Filament Wound Hybrid Composite Pipes: Part-1 Mechanical Characterization and Drilling Tests. Composites Part B: Engineering, 107787. Imamura, T., Kuroiwa, T., Terashima, K., Takemoto, H., 1999.
  5. Proc. In Systems, Man and Cybernetics, IEEE SMC'99 Conference (IEEE 1999), 12-15 October, 1999.
  6. Antalya-Turkey. Kim, Y.K., Chalivendra, V., 2020. Natural Fibre Composites (NFCs) for Construction and Automotive Industries. In Handbook of Natural Fibres (pp. 469-498).
  7. Woodhead Publishing. Krishnamurthy, T.N., Idkan, M., 2014. Fabrication of Low Cost Filament Winding Machine. Journal of Recent Trends in Electrical & Electronics Engg., 4(1), 30-39.
  8. Mateen, M.A., Shankar, D.R., Hussain, M.M., 2018. Design and Development of Low Cost Two Axis Filament Winding Machine. Journal of Advanced Manufacturing Technology (JAMT), 12(1), 117-126.
  9. Mutasher, S., Mir-Nasiri, N., Chai Lin, L., 2012. Small-Scale Filament Winding Machine for Producing Fiber Composite Products. Journal of Engineering Science and Technology, 7.2, 156-168.
  10. Özbek, Ö., Bozkurt, Ö.Y., 2019. Hoop Tensile and Compression Behavior of Glass-Carbon Intraply Hybrid Fiber Reinforced Filament Wound Composite Pipes. Materials Testing, 61(8), 763-769.
  11. Peters, S.T., 2011. Composite Filament Winding: ASM International, Materials Park, Ohio, USA. Quanjin, M., Rejab, M.R.M., Kumar, N.M., Idris, M.S., 2019. Experimental Assessment of the 3-Axis Filament Winding Machine Performance. Results in Engineering, 2, 100017. Saad, M.A., 1997. Design and Fabricate Filament Winding Machine and Analysis of Cotton/Epoxy and Pandanus/Epoxy: Master Thesis, Universiti Putra Malaysia.