Dergiler / Gıda / 2017 / Cilt: 42 - Sayı: 6

LTHV (LOW TEMPERATURE AND HIGH VELOCITY) DRYING CARACTERISTICS AND MATHEMATICAL MODELING OF ANCHOVY (ENGRAULIS ENCRASICOLUS)

HAMSİ'NİN (ENGRAULIS ENCRASICOLUS) LTHV (DÜŞÜK SICAKLIK VE YÜKSEK HIZ) KURUTMA KARAKTERİSTİKLERİ VE MATEMATİKSEL MODELLENMESİ

Dergi
Gıda
Sayfa
654–665
Yayın Tarihi
2022-10-17
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak, Hamsinin her LTHV kurutma sıcaklığı için en uygun matematiksel modeller belirlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmanın temel amacı, Hamsinin (Engraulis encrasicolus) LTHV kurutma özelliklerini deneysel olarak araştırmaktır.
📊
Temel Bulgular & Veri:Bu amaçla, 100 g Hamsi örnekleri ~% 38 bağıl nemde ~7 m/s hıza sahip hava kullanılarak, 4, 10, 15 ve 20 °C sıcaklıklarda kurutuldu.
💡
Sonuç & Katkı:Sonuç olarak, Hamsinin her LTHV kurutma sıcaklığı için en uygun matematiksel modeller belirlenmiştir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışmanın temel amacı, Hamsinin (Engraulis encrasicolus) LTHV kurutma özelliklerini deneysel olarak araştırmaktır. Bu amaçla, 100 g Hamsi örnekleri ~% 38 bağıl nemde ~7 m/s hıza sahip hava kullanılarak, 4, 10, 15 ve 20 °C sıcaklıklarda kurutuldu. Deneyler sırasında ağırlık kaybı, sıcaklık, kuruma hızı ve bağıl nemi değerleri belirlenmiştir. Hamsi filetolarının ağırlığı, 4 °C'de 25 saatte, 100 g'dan 47.6 g 'a, 10 °C'de 23 saatte 46.7 g'a, 15 °C'de 20 saatte 45.3 g'a, 20°C'de 13 saatte 44.67 g'a düşmüştür. Bu kapsamda, gözlemlenen kurutma deney verileri üzerine yirmi üç ortak matematiksel model uygulanmıştır. Sonuç olarak, Hamsinin her LTHV kurutma sıcaklığı için en uygun matematiksel modeller belirlenmiştir. En uygun modeli belirlemek için R2 (Determinasyon Katsayıları), X2 (Ki-Kare) ve RMSE (Tahmini Standart Hata) kullanılmıştır. Elde edilen sonuçlara göre, Logaritmik (Asimptotik), Midilli-Küçük, Demir ve diğerleri, Balbay ve Şahin, her LTHV kurutma sıcaklığı için 4, 10, 15 ve 20 °C'de en uygun matematiksel modeller olduğu belirlenmiştir. Sonuç olarak, hamsinin ince tabaka LTHV kurutma karakteristiğini en iyi temsil edecek en uygun modeller ortaya konmuştur

Abstract

The main target of this work is to investigate the LTHV drying properties of Anchovy (Engraulis encrasicolus) experimentally. For this purpose, 100 g of anchovy samples were dried using ~7 m/s velocity and ~38% relative humidity at 4, 10, 15 and 20 °C. During the drying experiments, temperature, mass loss, drying air velocity and humidity were investigated. The weight of raw Anchovy fillets decreased from 100 g to 47.6 g at 4 °C for 25 h, 46.7 g at 10 °C for 23 h, 45.3 g at 15 °C for 20 h and 44.67 g at 20 °C for 13 h. In this context, Twenty-three common mathematical models were used on the experimental LTHV drying results. As result, the most suitable models of LTHV drying were determined for the each LTHV drying temperature. The R2 (determination coefficient), X2 (chi square) and RMSE (root mean square error) were applied to find the most suitable models. In this regard, Logarithmic (Asymptotic), Midilli-Kucuk, Demir et al, Balbay-Sahin models were chosen as the best mathematical models for each LTHV drying temperature at 4, 10, 15 and 20 °C. Consequently, the best single layer drying curve equations were chosen as the optimal models for LTHV drying of anchovy

🔖

Bu Makaleye Atıf Yap

KİLİC, A. (2022). LTHV (LOW TEMPERATURE AND HIGH VELOCITY) DRYING CARACTERISTICS AND MATHEMATICAL MODELING OF ANCHOVY (ENGRAULIS ENCRASICOLUS). Gıda, Cilt: 42 - Sayı: 6, 654–665. https://ajindex.com/articles/525255

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. AOAC (1995). Official methods of analysis. Association of Official Analysis Chemists, 16th Edition,
  2. V II, Arlington, VA, USA, pp. 938-940.
  3. Akpinar, E. Kavak, Bicer, Y. (2008). Mathematical modelling of thin layer drying process of long green pepper in solar dryer and under open sun. Energ Convers Manage, 49(6): 1367-1375.
  4. Chairi, H., Rebordinos, L. (2014). A rapid method for differentiating four species of the Engraulidae family. J Agric Food Chem, 62(13): 2803-2808.
  5. Chin, S.K., Law, C.L., Supramaniam, C.V.S., Cheng, P.G., Mujumdar, A.S. (2008). Convective drying of G. tsugae murrill and effect of temperature on basidiospores. Dry Technol, 26(12): 1524-1533.
  6. Cruess, W.V. (1958). Commercial fruit and vegetable products. McGraw Hill, New York, pp. 1958-884. ISBN: 13 9780070148086. Cyprian, O. O., Nguyen, V. M., Sveinsdottir, K., Jonsson, A., Thorkelsson, G., Arason, S. (2015). Influence of lipid content and blanching on capelin drying rate and lipid oxidation under low temperature drying. J Food Process Eng, 39(3): 237- 246. Dincer, I. (1996). Sun drying of sultana grape. Dry Technol, 14(7):1827-1838.
  7. Dincer, I. (1998). Moisture loss from wood products during drying Part 1: Moisture diffusivities and moisture transfer coefficients, Energy Sources, 20(1): 67-75.
  8. Dongbang, W., Matthujak, A. (2013). Anchovy drying using infrared radiation. Am J Appl Sci, 10(4): 353-360.
  9. Hall, C.W. (1980). Drying and storage of agricultural crops. AVI Publish Company, Inc., Westport, pp. 100-266. ISBN: 087055364X, 9780870553646. Jan, K, Riar C.S., Saxena, D.C. (2014). Mathematical modelling of thin-layer drying kinetics of biodegradable pellets. J Food Process Technol, 5(9): 370, doi: 10.4172/2157- 7110.1000370. Keey, R.B. (1992). Drying of loose and particulate materials. Dry Technol, 10(4): 1139-1141, doi.org/10.1080/07373939208916507. Kilic, A., Oztan, A. (2013). Effect of ascorbic acid utilization on cold smoked fish quality (O. mykiss) during process and storage. Food Sci Technol Res, 19(5) 823-831 p. Kilic, A. (2009). Low temperature and high velocity (LTHV) application in drying: Characteristics and effects on the fish quality, J Food Eng, 91(1): 173-182, doi.org/10.1016/j.jfoodeng.2008.08.023. Kilic, A. (2017). Mathematical modeling of low temperature high velocity (LTHV) drying in Foods. J Food Process Eng, 40(2): e12378, doi:10.1111/jfpe.12378. Kilic, A., Kucuk, H., Midilli, A. (2014). Environmental friendly food smoking technologies. In: Progress in Sustainable Energy