Dergiler / Teknik Dergi / 2015 / Cilt: 26 - Sayı: 4

Geosentetik Kil Örtülerin Hidrolik İletkenliklerinin Laboratuvarda Belirlenmesi Üzerine Bir Çalışma

A Study for Determining the Hydraulic Conductivity of Geosynthetic Clay Liners in the Laboratory

Sayfa
7191–7213
Yayın Tarihi
2015-10-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu çalışmada elde edilen hidrolik iletkenliklerin literatürle uyumlu olduğu sonucu çıkmıştır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Burada sunulan çalışma geosentetik kil örtülerin (GKÖ) hidrolik iletkenlik deneylerinin nasıl yapılacağını ve sonuçların nasıl değerlendirileceğini göstermek üzere hazırlanmıştır.
📊
Temel Bulgular & Veri:Bu çalışma kapsamında dört farklı GKÖ damıtık (deiyonize) su ve çeşme suyu ile süzdürülerek hidrolik iletkenlik deneyine tabi tutulmuştur.
💡
Sonuç & Katkı:Bu çalışmada elde edilen hidrolik iletkenliklerin literatürle uyumlu olduğu sonucu çıkmıştır.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Atık depolama alanı · bentonit · geosentetik kil örtü

Özet

Burada sunulan çalışma geosentetik kil örtülerin (GKÖ) hidrolik iletkenlik deneylerinin nasıl yapılacağını ve sonuçların nasıl değerlendirileceğini göstermek üzere hazırlanmıştır. Bu çalışma kapsamında dört farklı GKÖ damıtık (deiyonize) su ve çeşme suyu ile süzdürülerek hidrolik iletkenlik deneyine tabi tutulmuştur. Deneyler altı ay sürdürülmüş ve GKÖ’lerin nihai hidrolik iletkenlikleri 7.110-10 - 1.410-9 cm/s arasında ölçülmüştür. Deneylerin sonlandırılması için deney süresi boyunca hidrolik iletkenliklerin dengeye (stabiliteye) ulaşıp ulaşmadığı kontrol edilmiştir. Bunun için hidrolik iletkenlik oranı tanımlanmış ve bu oranın 1.5’un altına düştüğü noktada hidrolik dengenin sağlandığı kabul edilmiştir. Ayrıca, süzüntü suyu ile GKÖ tipinin hidrolik iletkenlik üzerine etkisinin sınırlı olduğu bulgulanmıştır. Bu çalışma sonuçları daha sonra literatürde yayımlanan hidrolik iletkenliklerle efektif gerilmenin fonksiyonu olarak karşılaştırılmıştır. Bu çalışmada elde edilen hidrolik iletkenliklerin literatürle uyumlu olduğu sonucu çıkmıştır.

Abstract

This study was prepared to show how to perform the hydraulic conductivity test on geosynthetic clay liners (GCLs) and how to evaluate the results. In the content of this study, four types of GCLs were subjected to hydraulic conductivity tests using deionized water and tap water. The tests lasted six months and the final hydraulic conductivities of GCLs were measured within the range of 7.110-10 - 1.410-9 cm/s. To terminate the tests, it was checked to see whether hydraulic stability was achieved or not throughout the test duration. To do this, hydraulic conductivity ratio was defined and it was accepted that the stability was assured when this ratio was reduced below 1.5. Besides, it was found that the effect of permeant water and the GCL types on the hydraulic conductivity were limited. The results of this study were also compared with the hydraulic conductivities that were reported in the literature as a function of effective stress. It is concluded that the findings of this study are in agreement with those in the literature.

🔖

Bu Makaleye Atıf Yap

ÖREN, A. H., DEMİRKIRAN, H. (2015). Geosentetik Kil Örtülerin Hidrolik İletkenliklerinin Laboratuvarda Belirlenmesi Üzerine Bir Çalışma. Teknik Dergi, Cilt: 26 - Sayı: 4, 7191–7213. https://ajindex.com/articles/51327

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Scalia, J., Benson, C. H., Edil, T. B., Bohnhoff G.L., Shackelford C. D., Geosynthetic Clay Liners Containing Bentonite Polimer Nanocomposite, Geo-Frontiers 2011, 2001-2009, 2011
  2. Scalia, J., Benson, C., Bohnhoff, G., Edil, T., and Shackelford, C., Long-Term Hydraulic Conductivity of a Bentonite-Polymer Composite Permeated with Aggressive Inorganic Solutions, Journal of Geotechnical and Geoenvironmental Engineering, 140 (3), 1-11, 2014
  3. Benson, C., Abichou, T., Jo, H., Forensic Analysis of Excessive Leakage from Lagoons Lined with a Composite GCL, Geosynthetics International, 11(3), 242-252, 2004
  4. Benson, C., Thorstad, P., Jo, H., and Rock, S., Hydraulic Performance of Geosynthetic Clay Liners in a Landfill Final Cover, Journal of Geotechnical and Geoenvironmental Engineering, 133(7), 814-827, 2007
  5. Benson, C., Ören, A., and Gates, W., Hydraulic Conductivity of Two Geosynthetic Clay Liners Permeated with a Hyperalkaline Solution, Geotextiles and Geomembranes, 28(2), 206-218, 2010
  6. Demirkıran, H. Determining the Hydraulic Conductivity Behavior of Geosynthetic Clay Liners (GCLs) Permeated with Different Leachates, Yüksek Lisans Tezi, Dokuz Eylül Üniversitesi, Fen Bilimleri Enstitüsü, İzmir, 84 pp., 2014
  7. Ören, A.H., Demirkıran, H., Yükselen Aksoy Y., Önal, Ö., Hidrolik İletkenlik Deneylerinin Tekrarlanabilirliği Üzerine Bir Çalışma, 5. Geoteknik Sempozyumu, 5-7 Aralık, Adana, 1-10 (Bildiriler Flash Belleğinde 57 Nolu bildiri), 2013
  8. Demirkıran, H., Akar, R.Ç., Ören, A.H., Geosentetik Kil Örtülerin Fiziksel Özelliklerinin Hidrolik İletkenlik Davranışına Etkisinin Belirlenmesi, 6. Ulusal Geosentetikler Konferansı, 29-30 Mayıs, İstanbul, 15-26, 2014
  9. Shackelford, C., Benson, C., Katsumi, T., and Edil, T., Evaluating the Hydraulic Conductivity of GCLs Permeated with Non-Standard Liquids, Geotextiles and Geomembranes, 18(2-3), 133-161, 2000
  10. ASTM D5084-10, Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter, American Society for Testing and Materials, ASTM International, West Conshohocken, Pa, 2002
  11. Petrov, R. J., Rowe, R. K., Quigley, R. M., Selected Factors Influencing GCL Hydraulic Conductivity, Journal of Geotechnical and Geoenvironmental Engineering, 123(8), 683-695, 1997
  12. ASTM D7100-11, Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions, American Society for Testing and Materials, A