Dergiler / Teknik Dergi / 2018 / Cilt: 29 - Sayı: 4

Bending of Super-Elliptical Mindlin Plates by Finite Element Method

Sayfa
8469–8496
Yayın Tarihi
2018-07-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu ilişkilerin belirlenmesinde yüksek yakınsama elde edilmesinin gerektiği gösterildi ve yetersiz sayıda serbestlik tanıtılması durumunda ankastre mesnetli plaklar için aynı davranışın bulunamadığı gösterildi.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Kayma şekil değiştirmesi yapabilen süper-eliptik plakların transvers yük altında eğilmesi sonlu eleman yöntemiyle incelendi.
📊
Temel Bulgular & Veri:Her düğüm noktasında üç serbestlik derecesine sahip dört düğüm noktalı izoparametrik dörtgen plak eğilme elemanı kullanıldı.Duyarlık analizi yapılarak kalınlık, en-boy oranı, süper-eliptik üs gibi geometrik özellikler için en büyük çökme değerleri parametrik olarak belirlendi.
💡
Sonuç & Katkı:Bu ilişkilerin belirlenmesinde yüksek yakınsama elde edilmesinin gerektiği gösterildi ve yetersiz sayıda serbestlik tanıtılması durumunda ankastre mesnetli plaklar için aynı davranışın bulunamadığı gösterildi.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:plak · çökme · eğilme

Özet

Kayma şekil değiştirmesi yapabilen süper-eliptik plakların transvers yük altında eğilmesi sonlu eleman yöntemiyle incelendi. Her düğüm noktasında üç serbestlik derecesine sahip dört düğüm noktalı izoparametrik dörtgen plak eğilme elemanı kullanıldı.Duyarlık analizi yapılarak kalınlık, en-boy oranı, süper-eliptik üs gibi geometrik özellikler için en büyük çökme değerleri parametrik olarak belirlendi. Ankastre ve nokta mesnetli süper-eliptik plakların çökmesinin eliptik ve dikdörtgen plakların arasında olduğu ortaya kondu. Bununla birlikte basit mesnetli plaklarda durumun tamamen farklı olduğu gözlemlendi. Bu ilişkilerin belirlenmesinde yüksek yakınsama elde edilmesinin gerektiği gösterildi ve yetersiz sayıda serbestlik tanıtılması durumunda ankastre mesnetli plaklar için aynı davranışın bulunamadığı gösterildi.

Abstract

Bending of shear deformable super-elliptical plates under transverse load was investigated using the Mindlin plate theory by means of the finite element method. Four-noded isoparametric quadrilateral plate bending element with three degrees of freedom per node was used. Parametric results for the maximum deflections were presented via sensitivity analysis for several geometric characteristics such as thickness, aspect ratio, and super-elliptical power. Good agreement with the solutions of elliptical and rectangular plates was obtained using fine mesh. The results revealed that the deflections of clamped and point supported super-elliptical plates lie in the range bounded by elliptical and rectangular plates. However, the bending response of simply supported plates was observed to be entirely different. It was shown that high rate of convergence is required to obtain such a relation and using insufficient number of degrees of freedom results in finding a totally different trend for the clamped case.

🔖

Bu Makaleye Atıf Yap

ALTEKİN, M. (2018). Bending of Super-Elliptical Mindlin Plates by Finite Element Method. Teknik Dergi, Cilt: 29 - Sayı: 4, 8469–8496. https://ajindex.com/articles/51270

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Reddy, J.N., Chao, W.C., Large-deflection and large-amplitude free vibrations of laminated composite-material plates, Computers and Structures, 13 (1-3), 341-347, 1981
  2. Mbakogu, F.C., Pavlovic, M.N., Bending of clamped orthotropic rectangular plates: a variational symbolic solution, Computers and Structures, 77 (2), 117-128, 2000
  3. Bayer, I., Guven, U., Altay, G., A parametric study on vibrating clamped elliptical plates with variable thickness, Journal of Sound and Vibration, 254 (1), 179-188, 2002
  4. Ozkul, T.A., Ture, U., The transition from thin plates to moderately thick plates by using finite element analysis and the shear locking problem, Thin-Walled Structures, 42 (10), 1405-1430, 2004
  5. Setoodeh, A.R., Karami, G., Static, free vibration and buckling analysis of anisotropic thick laminated composite plates on distributed and point elastic supports using a 3-D layer-wise FEM, Engineering Structures, 26 (2), 211-220, 2004
  6. Algazin, S.D., Vibrations of a free-edge variable-thickness plate of arbitrary shape in plan, Journal of Applied Mechanics and Technical Physics, 52 (1), 126-131, 2011
  7. Cai, Y.C., Tian, L.G., Atluri, S.N., A simple locking-free discrete shear triangular plate element, CMES, 77 (4), 221-238, 2011
  8. Kutlu, A., Omurtag, M.H., Large deflection bending analysis of elliptic plates on orthotropic elastic foundation with mixed finite element method, International Journal of Mechanical Sciences, 65 (1), 64-74, 2012
  9. Sapountzakis, E.J., Dikaros, I.C., Large deflection analysis of plates stiffened by parallel beams, Engineering Structures, 35, 254-271, 2012
  10. Thai, H.-T., Choi, D.-H., Analytical solutions of refined plate theory for bending, buckling and vibration analyses of thick plates, Applied Mathematical Modelling, 37 (18-19), 8310-8323, 2013
  11. Rao, L.B., Rao, C.K., Buckling of annular plates with elastically restrained external and internal edges, Mechanics Based Design of Structures and Machines, 41 (2), 222- 235, 2013
  12. Sanusei, S., Mazhari, E., Shahidi, A., Analysis of buckling behavior of elliptical plate with non-concentric elliptic hole, International Journal of Materials Engineering and Technology, 13 (1), 81-108, 2015
  13. Szilard, R., Theories and Applications of Plate Analysis, USA, John Wiley & Sons Inc.,2004
  14. Altay, G., Dokmeci, M.C., A polar theory for vibrations of thin elastic shells, International Journal of Solids and Structures, 43 (9), 2578–2601, 2006
  15. Lee, S.L.,