Dergiler / European Mechanical Science / 2019 / Cilt: 3 - Sayı: 4

Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy

Sayfa
159–163
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The lowest value of surface roughness (0.41 µm) was acquired at a feed of 3008 mm/min, a spindle speed of 5981 rpm and a depth of cut of 0.54 mm.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the selection of optimal cutting parameters for face milling of 5083 aluminum was investigated in order to minimize the surface roughness.
📊
Temel Bulgular & Veri:Effect of selected parameters on the surface roughness was analyzed by using analysis of variance (ANOVA).
💡
Sonuç & Katkı:The lowest value of surface roughness (0.41 µm) was acquired at a feed of 3008 mm/min, a spindle speed of 5981 rpm and a depth of cut of 0.54 mm.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:RSM · ANOVA · DFA

Abstract

In this study, the selection of optimal cutting parameters for face milling of 5083 aluminum was investigated in order to minimize the surface roughness. Effect of selected parameters on the surface roughness was analyzed by using analysis of variance (ANOVA). The mathematical model was developed to estimate surface roughness in face milling process by using Response Surface Methodology (RSM). Feed, spindle speed and depth of cut were selected as input variables. The statistical analysis indicated that feed and spindle speed have the most considerable influence on surface roughness. After developed mathematical model, Desirability Function Analysis (DFA) was performed to optimize the cutting parameters. The lowest value of surface roughness (0.41 µm) was acquired at a feed of 3008 mm/min, a spindle speed of 5981 rpm and a depth of cut of 0.54 mm.

Anahtar kelimeler
🔖

Bu Makaleye Atıf Yap

KAHRAMAN, F., ÖNDER, G. T., BAŞAR, G. (2022). Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy. European Mechanical Science, Cilt: 3 - Sayı: 4, 159–163. https://ajindex.com/articles/512475

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Çetin, M., Bilgin, M., Ulaş, H.B., Tandıroğlu, A. (2011). Kaplamasız sermet takımla AISI 6150 çeliğinin frezelenmesinde kesme parametrelerinin yüzey pürüzlülüğüne etkisi. Electronic Journal of Vocational Colleges, 1(1): 168-176
  2. Özel, T., Karpat, Y. (2005). Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. International Journal of Machine Tools and Manufacture, 45(4-5): 467-479, DOI: 10.1016/j.ijmachtools.2004.09.007
  3. Kulekci, M.K., Eşme, U., Ekşi, A.K., Koçoğlu, Z., Yılmaz, N.F. (2017). En Aw 5754 (Almg3) alüminyum alaşımının frezelenmesi işleminde kesme parametrelerinin yüzey pürüzlülüğüne etkisinin incelenmesi. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 32(2): 153-160, DOI: 10.21605/cukurovaummfd.358418
  4. Fedai, Y., Ünüvar, A., Akın, H.K., Başar, G. (2019). 316L Paslanmaz çeliklerin frezeleme işlemindeki yüzey pürüzlülüğün ANFIS ile modellenmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 7(2): 98-110, DOI: 10.29130/dubited.466629
  5. Rubio E.M., Villeta M., Carou D., Saá A. (2014). Comparative analysis of sustainable cooling systems in intermittent turning of magnesium pieces. International journal of precision engineering and manufacturing, 15(5): 929-940, DOI: 10.1007/s12541-014-0419-5
  6. Pradhan, S., Singh, G., Bhagi, L.K. (2018). Study on surface roughness in machining of Al/SiCp metal matrix composite using desirability function analysis approach. Materials Today: Proceedings, 5(14): 28108-28116, DOI: 10.1016/j.matpr.2018.10.052
  7. Esme, U. (2015). Surface roughness analysis and optimization for the CNC milling process by the desirability function combined with the response surface methodology. Materials Testing, 57(1): 64-71, DOI: 10.3139/120.110679
  8. Fnides, M., Yallese, M., Khattabi, R., Mabrouki, T., Girardin, F. (2017). Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts. International Journal of Industrial Engineering Computations, 8(4): 493-512
  9. Palanisamy C., Singh J.S.A., Chinnasamy N. (2017). Development of response surface model to predict the surface roughness during milling of aluminium alloy. International Journal of Science, Engineering and Technology Research, 6(11): 1456-1460
  10. Güvercin S., Yıldız A. (2018). Optimization of cutting parameters using the response surface method. Sigma Journal of Engineering and Natural Sciences, 36(1): 11