Metallographic investigations demonstrated that there was a small amount of porosity in the welding zone of the specimens jointed at 1500 rpm.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, the effect of tool rotation speed on the mechanical and metallurgical properties of friction stir spot welded (FSSW) AA 7075-T6 aluminum alloy plates was investigated.
📊
Temel Bulgular & Veri:Aluminum alloy plates were joined by FSSW using welding parameters consisting of three different rotation speeds of 1040, 1320 and 1500 rpm and a constant insertion depth of 3.2 mm.
💡
Sonuç & Katkı:Metallographic investigations demonstrated that there was a small amount of porosity in the welding zone of the specimens jointed at 1500 rpm.
In this study, the effect of tool rotation speed on the mechanical and metallurgical properties of friction stir spot welded (FSSW) AA 7075-T6 aluminum alloy plates was investigated. Aluminum alloy plates were joined by FSSW using welding parameters consisting of three different rotation speeds of 1040, 1320 and 1500 rpm and a constant insertion depth of 3.2 mm. In spot welded specimens, the highest tensile strength value (6200 N) was obtained in plates welded at a tool rotation speed of 1500 rpm. The data obtained from the metallographic analysis are compatible with the tensile test results. Metallographic investigations demonstrated that there was a small amount of porosity in the welding zone of the specimens jointed at 1500 rpm.
ÇAKAN, A., UĞURLU, M. (2022). The Effect of Tool Rotation Speed on Mechanical Properties of Friction Stir Spot Welded (FSSW) AA7075-T6 Aluminium Alloy Sheets. European Mechanical Science, Cilt: 3 - Sayı: 3, 97–101. https://ajindex.com/articles/512454
Jedrasiak, P., Shercliff, H.R., Reilly, A., McShane, G.J., Chen, Y.C., Wang, L., Robson, J., Prangnell, P. (2016). Thermal modeling of al-al and al-steel friction stir spot welding. Journal of Materials Engineering and Performance, 25(9): 4089-4098, DOI: 10.1007/s11665-016-2225-y. Rostamiyan, Y., Seidanloo, A., Sohrabpoor, H., Teimouri, R. (2015). Experimental studies on ultrasonically assisted friction stir spot welding of AA6061. Archives of Civil and Mechanical Engineering, 15(2): 335-346, DOI: 10.1016/j.acme.2014.06.005. Tutar, M., Aydin, H., Yuce, C., Yavuz, N., Bayram, A. (2014). The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a taguchi orthogonal array. Materials and Design, 63: 789-797, DOI: 10.1016/j.matdes.2014.07.003. Su, Z.M., He, R.Y., Lin, P.C., Dong, K. (2014). Fatigue analyses for swept friction stir spot welds in lap-shear specimens of alclad 2024-T3 aluminum sheets. International Journal of Fatigue, 61: 129-140, DOI: 10.1016/j.ijfatigue.2013.11.021. Wang, D.A., Lee, S.C. (2007). Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-t6 sheets. Journal of Materials Processing Technology, 186(1-3): 291-297, DOI: 10.1016/j.jmatprotec.2006.12.045. Cakan, A., Atmaca, H., Ugurlu, M. (2018). Analysis and joining of al–cu plates using friction-stir welding technique. European Mechanical Science, 2(1): 1-8, DOI: 10.26701/ems.358729. Yazdipour, A., Heidarzadeh, A. (2016). Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints. Journal of Alloys and Compounds, 680: 595-603, DOI: 10.1016/j.jallcom.2016.03.307. Sinha, V.C., Kundu, S., Chatterjee, S. (2016). Microstructure and mechanical properties of similar and dissimilar joints of aluminium alloy and pure copper by friction stir welding. Perspectives in Science, 8: 543-546, DOI: 10.1016/j.pisc.2016.06.015. Cam, G., Serindag, H.T., Cakan, A., Mistikoglu, S., Yavuz, H. (2008). The effect of weld parameters on friction stir welding of brass plates. Materialwissenschaft und Werkstofftechnic, 39(6): 394-399, DOI: 10.1002/mawe.200800314. Cam, G., Gucluer, S., Cakan, A., Serindag, H.T. (2009). Mechanical properties of friction stir butt-welded Al-5086 H32 plate. Materialwissenschaft und Werkstofftechnic, 40(8): 638-642, DOI: 10.1002/mawe.200800455. Uzun, H., Donne, C.D., Argagnotto, A., Ghidini, T., Gambaro, C. (2005). Friction stir welding