Dergiler / European Mechanical Science / 2021 / Cilt: 5 - Sayı: 3

Characterization of Mechanical of CTBN Liquid Rubber‐Modified Epoxy Cured by Anhydride- and Amine-Based Agent

Sayfa
121–129
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The toughening mechanisms induced by CTBN, such as rubber cavitation and matrix shear banding, contributed to the enhanced fracture toughness of the amine-cured CTBN/epoxy.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The main purpose of this work is to reveal the effects of carboxyl-terminated butadiene–acrylonitrile (CTBN) rubber particles on the fracture and tensile behavior of anhydride-and amine-cured epoxy/CTBN blends.
📊
Temel Bulgular & Veri:In this study, 1 wt.%, 3 wt.%, 5 wt.%, 7 wt.%, 10 wt.% and 15 wt.% CTBN were added to two different epoxy-hardener systems.
💡
Sonuç & Katkı:The toughening mechanisms induced by CTBN, such as rubber cavitation and matrix shear banding, contributed to the enhanced fracture toughness of the amine-cured CTBN/epoxy.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Epoxy · CTBN · fracture toughness

Abstract

The main purpose of this work is to reveal the effects of carboxyl-terminated butadiene–acrylonitrile (CTBN) rubber particles on the fracture and tensile behavior of anhydride-and amine-cured epoxy/CTBN blends. In this study, 1 wt.%, 3 wt.%, 5 wt.%, 7 wt.%, 10 wt.% and 15 wt.% CTBN were added to two different epoxy-hardener systems. The CTBN/epoxy blends were prepared by ultrasonic mixing device and curing processes were determined by DSC analysis. As CTBN fraction by weight increased in both epoxy systems, a decrease in tensile strength and modulus was detected, but deformation ability improved. The fracture toughness of CTBN/epoxy blends cured with amine-based hardener increased up to 10 wt.% CTBN addition and then decreased. The average rubber particle size was found to have a significant effect on the fracture toughness of CTBN/epoxy blends. Compared to pure epoxy, fracture toughness increased approximately 3.5-fold in amine-cured 10% CTBN / epoxy blend. In CTBN/epoxy blends cured by amine-based curing agent, CTBN shifted the reaction rate and thus it was provided better control over CTBN particle size in the cured CTBN/epoxy. The toughening mechanisms induced by CTBN, such as rubber cavitation and matrix shear banding, contributed to the enhanced fracture toughness of the amine-cured CTBN/epoxy.

🔖

Bu Makaleye Atıf Yap

SEPETÇİOĞLU, H. (2022). Characterization of Mechanical of CTBN Liquid Rubber‐Modified Epoxy Cured by Anhydride- and Amine-Based Agent. European Mechanical Science, Cilt: 5 - Sayı: 3, 121–129. https://ajindex.com/articles/512392

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (17)

  1. Aslan, A., Salur, E. (2021) Düzcükoğlu H, Şahin ÖS, Ekrem M. The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins. Construction and Building Materials. 272:121929
  2. Aslan, A., Salur, E. (2021) Düzcükoğlu H, Şahin ÖS, Ekrem M. The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins. Construction and Building Materials. 272:121929
  3. Lee, H., Neville, K. (1967). Handbook of epoxy resins
  4. Lee, H., Neville, K. (1967). Handbook of epoxy resins
  5. Lee, LJ. (1989). Modeling and coputer simulation of reactive processing
  6. Lee, LJ. (1989). Modeling and coputer simulation of reactive processing
  7. Thomas, R., Durix S, Sinturel C, Omonov T, Goossens S, Groeninckx G, et al. (2007). Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin–Effects of a liquid rubber inclusion. Polymer.;48(6):1695-710
  8. Thomas, R., Durix S, Sinturel C, Omonov T, Goossens S, Groeninckx G, et al. (2007). Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin–Effects of a liquid rubber inclusion. Polymer.;48(6):1695-710
  9. Gibson, RF. (2016.). Principles of composite material mechanics: CRC press
  10. Gibson, RF. (2016.). Principles of composite material mechanics: CRC press
  11. Ebrahimabadi Y, Mehrshad M, Mokhtary M, Abdollahi M. (2021). Studies of thermal, mechanical properties, and kinetic cure reaction of carboxyl‐terminated polybutadiene acrylonitrile liquid rubber with diepoxy octane. Journal of Applied Polymer Science. 38(9):49932
  12. Ebrahimabadi Y, Mehrshad M, Mokhtary M, Abdollahi M. (2021). Studies of thermal, mechanical properties, and kinetic cure reaction of carboxyl‐terminated polybutadiene acrylonitrile liquid rubber with diepoxy octane. Journal of Applied Polymer Science. 38(9):49932
  13. Guild F, Kinloch A. (1995). Modelling the properties of rubber-modified epoxy polymers. Journal of materials science. 30(7):1689-97
  14. Guild F, Kinloch A. (1995). Modelling the properties of rubber-modified epoxy polymers. Journal of materials science. 30(7):1689-97
  15. Huang Y, Kinloch A. (1992) Modelling of the toughening mechanisms in rubber-modified epoxy polymers. Journal of materials science. 27(10):2753-62
  16. Huang Y, Kinloch A. (1992) Modelling of the toughening mechanisms in rubber-modified epoxy polymers. Journal of materials science. 27(10):2753-62
  17. Jung H-S, Park Y, Nah C-W, Lee J-C, Kim K-Y, Lee CS. Evaluatio