Dergiler / European Mechanical Science / 2022 / Cilt: 6 - Sayı: 3

Analysis of different methods of suppressing generator noise reaching indoor noise

Sayfa
161–178
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

While materials such as an acoustic sponge, which are preferred in passive control methods, are open-celled and porous structures, it is advantageous to have sound absorption capacity, but it can be a disadvantage due to its synthetic content.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The noise which occurs during the operation of the auxiliary power units is a disturbing factor, although its level varies depending on the environment.
📊
Temel Bulgular & Veri:In case the sampled natural gas generator is closed with 2 mm thick plywood and a steel framed box covered with an acoustic sponge, the sound pressure level is approximately 30 dB in low frequency diesel + electric generators using a silencer according to active control methods.
💡
Sonuç & Katkı:While materials such as an acoustic sponge, which are preferred in passive control methods, are open-celled and porous structures, it is advantageous to have sound absorption capacity, but it can be a disadvantage due to its synthetic content.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sound · Noise · Acoustic

Abstract

The noise which occurs during the operation of the auxiliary power units is a disturbing factor, although its level varies depending on the environment. This high level of noise in occupational areas can cause not only health but also accidents risks. While silencers are mostly preferred for active noise control, acoustic foam or textile products are preferred according to passive control methods. In this review, the noises produced by the generators were examined and the studies in the literature on suppressing these noises were evaluated by making comparative analyzes. New recommendations have been developed according to the results of the comparative analysis. In case the sampled natural gas generator is closed with 2 mm thick plywood and a steel framed box covered with an acoustic sponge, the sound pressure level is approximately 30 dB in low frequency diesel + electric generators using a silencer according to active control methods. In measurements; It was observed that it decreased from 93.2 to 88.4 dB. While materials such as an acoustic sponge, which are preferred in passive control methods, are open-celled and porous structures, it is advantageous to have sound absorption capacity, but it can be a disadvantage due to its synthetic content.

🔖

Bu Makaleye Atıf Yap

BULUKLU, H. M., KOÇYİĞİT, F. B., KÖSE, E. (2022). Analysis of different methods of suppressing generator noise reaching indoor noise. European Mechanical Science, Cilt: 6 - Sayı: 3, 161–178. https://ajindex.com/articles/512383

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (3)

  1. https://www.resmigazete.gov.tr/eskiler/2017/05/20170531-7.html [2]https://www.izoder.org.tr/dosyalar/binalarin-gurultuye-karsi-korunmasi-yonetmeligi-aciklama -ve-uygulama-klavuzu.pdf [3] Caliskan, M., Belgin, E. (2004). Noise at Work and Protection of Business, Part II Noise: Concept and Approach, Middle East Technical University Department of Mechanical Engineering, First Edition, Turkish Medical Association Publications, ISBN 975-6984-65-1, 2004: p: 7. [4] Adams, W. (2010).
  2. Noise. New Community Plan, Draft EIR. Taha 2010-074. (www. planning. lacity. org/eir/westadams/deir/index.html). [5] Origer, T., & Associates W-Trans. Noise, Southeast Greenway General Plan Amendment and Rezoning, Revised Draft Eir, City of Santa Rosa, January 28 2019. [6] Keet, J. (2004). City of Tshwane Metropolitan Municipality, City of Tshwane Noise Management Policy (Second Draft) June 2004.d by: Calyx Prepare Environmental cc (in association with Jongens Keet Associates). [7] Özkan, M. O., Çiftçi, S. E., Öztürk Akbaş, A., Postalcıoğlu Bozcan, F. E. Guide to Combating Noise in Working Life, T.C. Ministry of Family, Labor and Social Services, General Directorate of Occupational Health and Safety. [8] Alauda, A. (2012).
  3. Noise Element, Historic Overview, Town Of Woodside General Plan. P:232. [9] ILO. (1984). Protection Of Workers Against Noise and Vibration In The Working Environment, pp: 64, ISBN 92-2-101709-5. [10] Acri, A., Offner, G., Nijman, E., Corradi, R. (2015). Numerical Transfer Path Analysis for the Assessment of Air-borne Noise in Internal Combustion Engines, International Conference on Engineering Vibration Ljubljana, Slovenia, 7-10 September 2015. [11] Gerges, S., Sehrndt, G. A. (2001). 5 Noise Sources. Occupational Exposure to Noise: Evaluation, Prevention and Control. Federal University of Santa Catarina, Mechanical Engineering Department, Noise and Vibration Laboratory. [12] BSI Standards Publication, BS 5228-1:2009+A1:2014. Code of practice for noise and vibration control on construction and open sites–Part 1: Noise Licensed copy: Warrington Borough Council, 24/08/2018, Uncontrolled Copy, © BSI, ISBN 978 0 580 77749 3. [13] Valley A. Noise. (2000). A technical assistance series prepared by: Maine State Planning Office Maine Department of Environmental Protection, Technical Assistance Bulletins. [14] Berger, EH, Neitzel, R., Kladden, CA. (2015). Noise Navigator TM Sound Level Database with Over 1700 Measurement Values EAR 88-34/HP 3M Personal Safety Division E A