KaydedilenlerDerginizi ekleyin

Dergiler / Teknik Dergi / 2019 / Cilt: 30 - Sayı: 4

Effects of Mixing Temperature on the Mechanical Properties of Hot Mix Asphalt

Gül BALIK
Mehmet YILMAZ
Baha Vural KÖK
Taner ALATAŞ
Sayfa
9221–9241
Yayın Tarihi
2019-07-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition, it was determined that, in general, the stability, Marshall quotient, indirect tensile strength and fatigue life of the mixtures decreased and the flow values increased with decreased mixing temperature.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the effects of mixing temperature on the performance of hot mix asphalt (HMA) were investigated. 5% Styrene-butadiene-styrene (SBS) and 18% America Gilsonite were used as binder modifiers.
📊
Temel Bulgular & Veri:HMA samples were prepared at the mixing temperatures 10°C, 15°C, and 20°C lower temperatures than the mixing temperature.
💡
Sonuç & Katkı:In addition, it was determined that, in general, the stability, Marshall quotient, indirect tensile strength and fatigue life of the mixtures decreased and the flow values increased with decreased mixing temperature.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Mixing temperature · Hot mix asphalt · Styrene-butadiene-styrene

Özet

In this study, the effects of mixing temperature on the performance of hot mix asphalt (HMA) were investigated. 5% Styrene-butadiene-styrene (SBS) and 18% America Gilsonite were used as binder modifiers. HMA samples were prepared at the mixing temperatures 10°C, 15°C, and 20°C lower temperatures than the mixing temperature. Marshall Stability and flow, resistance to moisture-induced damage and indirect tensile fatigue tests were conducted on the hot mix asphalt samples. As a result of the experimental study, it was determined that the use of additives increased the performance of the HMAs. In addition, it was determined that, in general, the stability, Marshall quotient, indirect tensile strength and fatigue life of the mixtures decreased and the flow values increased with decreased mixing temperature.

Abstract

In this study, the effects of mixing temperature on the performance of hot mix asphalt (HMA) were investigated. 5% Styrene-butadiene-styrene (SBS) and 18% America Gilsonite were used as binder modifiers. HMA samples were prepared at the mixing temperatures 10°C, 15°C, and 20°C lower temperatures than the mixing temperature. Marshall Stability and flow, resistance to moisture-induced damage and indirect tensile fatigue tests were conducted on the hot mix asphalt samples. As a result of the experimental study, it was determined that the use of additives increased the performance of the HMAs. In addition, it was determined that, in general, the stability, Marshall quotient, indirect tensile strength and fatigue life of the mixtures decreased and the flow values increased with decreased mixing temperature.

🔖

Bu Makaleye Atıf Yap

BALIK, G., YILMAZ, M., KÖK, B. V., ALATAŞ, T. (2019). Effects of Mixing Temperature on the Mechanical Properties of Hot Mix Asphalt. Teknik Dergi, Cilt: 30 - Sayı: 4, 9221–9241. https://ajindex.com/articles/51237

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Kök, B.V., Yilmaz, M., Kuloglu, N., Asfaltitin Bitüm ve Bitümlü Sıcak Karışımların Mekanik Özelliklerine Etkisi, İMO Teknik Dergi, 5813-5826, 2012
  2. Benhood, A., Olek, J., Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA), Construction and Building Materials, 151: 464–478, 2017
  3. Whiteoak, D., Shell Bitumen Handbook, Shell Bitumen UK, Riversdell Hause, 1990
  4. Zhu, J., Birgisson, B., Kiringos, N., Polymer modification of bitumen: advances and challenges, European Polymer Journal, 54: 18–38, 2014
  5. Ahmedzade, P., Alataş, T., Geçkil, T., Asfalt Betonunda Siyah Karbonun Filler Olarak Kullanımı, İMO Teknik Dergi, 4493-4507, 2008
  6. Kök, B.V., Yılmaz, M., Erkuş, Y., Effect of graphite on mechanical properties of stone mastic asphalt pavement, Journal of Civil Engineering and Management 23 (8): 1013-1020, 2017
  7. Topal, A., Evaluation of the properties and microstructure of plastomeric polymer modified bitumens, Fuel Processing Technology, 91 (1): 45-51, 2010
  8. Nejad, F.M., Azarhoosh, A.R., Hamedi, G.H., Azarhoosh, M.J., Characterization of permanent deformation resistance of precipitated calcium carbonate modified asphalt mixture, Journal of Civil Engineering and Management, 21 (5): 615-622, 2015
  9. Şengöz, B., Işıkyakar, G., Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods, Journal of Hazardous Materials, 150: 424–432, 2008
  10. Kumar, K., Singh, A., Maity, S.K., Srivastava, M., Sahai, M., Singh, R.K., Garg, M.O., Rheological studies of performance grade bitumens prepared by blending elastomeric SBS (styrene butadiene styrene) co-polymer in base bitumens, Journal of Industrial and Engineering Chemistry, 44: 112-117, 2016
  11. Isacsson, U., Lu, X., Testing and appraisal of polymer modified road bitumens: state of the art, Materials and Structures, 28: 139–159, 1995
  12. Cavaliere, M.G., Diani, E., Dia, M.D., Dynamic mechanical characterization of binder and asphalt concrete, Proceedings of the Euroasphalt and Eurobitume Congress, 7-10 May, Strasbourg, France, 1996
  13. Brown, S.F., Rowlett, R.D., Boucher, J.L., Asphalt modification, Proceedings of the conference The United States strategic highway research program, 29-31 October, London, England, 181–203, 1990
  14. Bahia, H.U., Hanson, D.I., Zeng, M., Zhai, H., Khatri M.A., Anderson, R.M., Characterization of modified asphalt binder