Dergiler / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2018 / Cilt: 6 - Sayı: 4

La0,7Nd0,1K0,2MnO3 Perovskit Manganit Bileşiğinin Yapısal ve Manyetik Akışkan Hipertermi Özelliğinin Araştırılması

Investigation of Structural and Magnetic Fluid Hyperthermia Properties of La0,7Nd0,1K0,2MnO3 Perovskite Manganite Composition

Sayfa
1335–1343
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Manyeto-termal ölçümler sonucunda bileşiğin SAR değeri 9.6 W/g olarak hesaplandı.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Çalışmada La0.7Nd0.1K0.2MnO3 nanoparçacıklar sol-gel yöntemiyle sentezlendi ve bileşiğin yapısal, manyetik ve manyeto-termal özellikleri detaylı bir biçimde incelendi.
📊
Temel Bulgular & Veri:Analiz sonucunda bileşiğin kristal örgüsünün Rhombohedral yapıda olduğu ve içesinde ayrıca La2O3 ve MnO2 safsızlıkların bulunduğu gözlendi.
💡
Sonuç & Katkı:Manyeto-termal ölçümler sonucunda bileşiğin SAR değeri 9.6 W/g olarak hesaplandı.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Perovskit manganit · manyetik akışkan hipertermi · sol-gel

Özet

Çalışmada La0.7Nd0.1K0.2MnO3 nanoparçacıklar sol-gel yöntemiyle sentezlendi ve bileşiğin yapısal, manyetik ve manyeto-termal özellikleri detaylı bir biçimde incelendi. Yapısal özelliklerin belirlenmesi için XRD ve SEM analizi yapıldı. Elde edilen XRD desenine FullProf programı kullanılarak Rietveld analizi yapıldı. Analiz sonucunda bileşiğin kristal örgüsünün Rhombohedral yapıda olduğu ve içesinde ayrıca La2O3 ve MnO2 safsızlıkların bulunduğu gözlendi. SEM analiziyle nanoparçacıkların iki farklı şekilde, küresel ve kübik şekillenime sahip olduğu belirlendi. Manyetik analizlerin sonucunda bileşiğin oda sıcaklığında ferromanyetik- kısmen paramanyetik duruma geçtiği ve var olan ferromanyetik faza ait doyum mıknatıslanması 0.23 Am2/kg ve bileşiğin koarsivite değeri 0.005 T olarak belirlendi. Manyeto-termal ölçümler sonucunda bileşiğin SAR değeri 9.6 W/g olarak hesaplandı.

Abstract

In this study, La0.7Nd0.1K0.2MnO3 nanoparticles were synthesized by sol-gel method and the structural, magnetic and magneto-thermal properties of the compound were investigated in detail. XRD and SEM analyzes have been performed to determine the structural properties. Rietveld analysis has been performed on the obtained XRD pattern using the FullProf program. At the analysis, it has been observed that the crystal symetry of the compound has had a rhombohedral structure and has had La2O3 and MnO2 impurities in the structure. SEM analysis has revealed that nanoparticles has had spherical and cubic shapes in two different forms. As a result of the magnetic analysis, it has been determined that the compound has been in a ferromagnetic partially paramagnetic state at the room temperature and the saturation magnetization of the existing ferromagnetic phase has been 0.23 Am2/ kg and the coercivity value has been 0.005 T. As a result of the magneto-thermal measurements, the SAR value of the compound has been calculated to be 9.6 W/g.

🔖

Bu Makaleye Atıf Yap

ÜNLÜ, C. G. (2022). La0,7Nd0,1K0,2MnO3 Perovskit Manganit Bileşiğinin Yapısal ve Manyetik Akışkan Hipertermi Özelliğinin Araştırılması. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 6 - Sayı: 4, 1335–1343. https://ajindex.com/articles/494520

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Belous, A.G., Synthesis and Properties of Ferromagnetic Nanostructures and Their Possible Use in Medicine and Microwave Engineering. 2014 Ieee International Conference on Oxide Materials for Electronic Engineering (Omee), p. 69-70, 2014
  2. Ansari, L. and B. Malaekeh-Nikouei, Magnetic silica nanocomposites for magnetic hyperthermia applications. International Journal of Hyperthermia, 33 (3), p. 354-363, 2017
  3. Epherre, R., et al., Manganite perovskite nanoparticles for self-controlled magnetic fluid hyperthermia: about the suitability of an aqueous combustion synthesis route. Journal of Materials Chemistry, 21 (12), p. 4393-4401, 2011
  4. S. Martirosyan, K., Thermosensitive Magnetic Nanoparticles for Self-Controlled Hyperthermia Cancer Treatment. Journal of Nanomedicine & Nanotechnology, 03 (06), 2012
  5. Bubnovskaya, L., et al., Magnetic Fluid Hyperthermia of Rodent Tumors Using Manganese Perovskite Nanoparticles. Journal of Nanoparticles, p. 1-9, 2014
  6. Pollert, E., et al., Core-shell La(1-x)Sr(x)MnO3 nanoparticles as colloidal mediators for magnetic fluid hyperthermia. Philos Trans A Math Phys Eng Sci, 368 (1927), p. 4389-405, 2010
  7. Myrovali, E., et al., Arrangement at the nanoscale: Effect on magnetic particle hyperthermia. Sci Rep, 6, p. 37934, 2016
  8. Nam, N.H., D.T.M. Huong, and N.H. Luong, Synthesis and Magnetic Properties of Perovskite La1-xSrxMnO3 Nanoparticles. Ieee Transactions on Magnetics, 50 (6), 2014
  9. Cullity, B.D. and C.D. Graham, Introduction to Magnetic Materials. Wiley, 2011
  10. Bornstein, B.A., et al., Local Hyperthermia, Radiation-Therapy, and Chemotherapy in Patients with Local-Regional Recurrence of Breast-Carcinoma. International Journal of Radiation Oncology Biology Physics, 25 (1), p. 79-85, 1993
  11. Kumar, C.S.S.R. and F. Mohammad, Magnetic nanomaterials for hyperthermia-based therapy and controlled drug delivery. Advanced Drug Delivery Reviews, 63(9), p. 789-808, 2011
  12. Haase, C. and U. Nowak, Role of dipole-dipole interactions for hyperthermia heating of magnetic nanoparticle ensembles. Physical Review B, 85(4), 2012
  13. Kumar, S., et al., Theranostic fluorescent silica encapsulated magnetic nanoassemblies for in vitro MRI imaging and hyperthermia. Rsc Advances, 5 (66), p. 53180-53188, 2015
  14. Arteaga-Cardona, F., et al., Improving the magnetic heating by disaggregating nanoparticles. Journal of Alloys and Compounds, 663, p. 636-644, 2016
  15. Gupta, A.K. and M. Gupta, Synthesis and surface