Dergiler / Cumhuriyet Dental Journal / 2013 / Cilt: 16 - Sayı: 3

Effects of different glass fibers on the transverse strength and elastic modulus of repairing acrylic resin

Sayfa
165–173
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Conclusions: Amongst all samples, the transverse strength and elastic modulus of the stick fiber reinforced samples was found to be the highest.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Objectives: The aim of this study was to evaluate the transverse strength and the elastic modulus of a heat- polymerized denture base resin repaired by adding various glass fibers into an autopolymerizing acrylic resin.
📊
Temel Bulgular & Veri:Materials and Methods: Fifty rectangular (65 mm × 10 mm × 2.5 mm) heat polymerized resin specimens were prepared which were divided in to five groups, with each including ten specimens.
💡
Sonuç & Katkı:Conclusions: Amongst all samples, the transverse strength and elastic modulus of the stick fiber reinforced samples was found to be the highest.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Objectives: The aim of this study was to evaluate the transverse strength and the elastic modulus of a heat- polymerized denture base resin repaired by adding various glass fibers into an autopolymerizing acrylic resin. Background: The key problems frequently encountered in dentures are fractures. A durable repairing system for a denture base fracture is desired to avoid recurrent fracturing. Materials and Methods: Fifty rectangular (65 mm × 10 mm × 2.5 mm) heat polymerized resin specimens were prepared which were divided in to five groups, with each including ten specimens. For the repairing procedure, samples with the autopolymerizing resin reinforced with stick, woven and chopped glass fibers were prepared. In addition, control samples with the autopolymerizing resin alone (in the absence of the glass fibres) were also obtained. Three-point bending tests were performed on all specimens. Results: The mean transverse strength for the control samples was 78.93 MPa. The specimens repaired with stick fiber reinforced resin exhibited the highest mean transverse strength of 83.16 MPa. The mean elastic modulus of the control specimens was 2121.86 MPa. The mean elastic modulus of the stick group was 7420 MPa. The elastic modulus values of the stick fiber reinforced specimens were significantly higher than the other groups (p < .05). Conclusions: Amongst all samples, the transverse strength and elastic modulus of the stick fiber reinforced samples was found to be the highest.

🔖

Bu Makaleye Atıf Yap

GÜL, E. B., ÖZDEMİR, D. D., POLAT, T. N., TOPUCUOĞLU, S. (2022). Effects of different glass fibers on the transverse strength and elastic modulus of repairing acrylic resin. Cumhuriyet Dental Journal, Cilt: 16 - Sayı: 3, 165–173. https://ajindex.com/articles/477215

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Nevalainen MJ, Rantanen T, Närhi T, Ainamo A. Complete dentures in the prosthetic rehabilitation of elderly persons: five different criteria to evaluate the need for replacement. J of Oral Rehabil 1997;24:251-258
  2. Marei MK. Reinforcement of denture base resin with glass fillers. J Prosthodont 1999;8:18-26
  3. Chen SY, Liang WM, Yen PS. Reinforcement of acrylic denture base resin by incorporation of various fibers. J Biomed Mater Res 2001;58:203-208
  4. Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater 2000; 16: 150-158
  5. Darbar UR, Huggett R, Harrison A. Denture fracture – a survey, Br Dent J 1994;176:342-345
  6. Dar-Odeh NS, Harrison A, Abu- Hammad O. An evaluation of self- cured and visible light-cured denture base materials when used as a denture base repair material. J Oral Rehabil 1997;24:755-760
  7. Stipho HD. Repair of acrylic resin denture base reinforced with glass fiber. J Prosthet Dent 1998;80:546- 550
  8. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat- polymerized resin. J Prosthet Dent 1994;72:639-643
  9. Rached RN, Powers J M, Del Bel Cury AA. Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins. J Prosthet Dent 2004;92:79-82
  10. Beyli MS, von Fraunhofer JA. Repair of fractured acrylic resin. J Prosthet Dent 1980;44:497-503
  11. Ward JE, Moon PC, Levine RA, Behrendt CL. Effect of repair surface design, repair material, and processing method on the transverse strength of repaired acrylic denture resin. J Prosthet Dent 1992;67:815- 820
  12. Zarb GA, Bolender CL, Hickey JC, Carlsson GE. Boucher’s prosthodontic treatment for edentulous patients. 10th ed. St. Louis (MO): Mosby–Year Book, 1990. pp. 588-589
  13. Vallittu PK. Glass fiber reinforcement in repaired acrylic resin removable dentures. Preliminary results of a clinical study, Quintessence Int 1997;28:39- 44
  14. Anusavice KJ. Phillips’ science of dental materials. 10th ed. Philadelphia (PA): WB Saunders, 1996. pp. 237-271
  15. Arioli Filho JN, Butignon LE, Pereira RP, Lucas MG, Mollo Junior FA. Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization. J Appl Oral Sci 2011;19:249-253
  16. Vallittu PK. The effect of void space and polymerization time on transverse strength of