Dergiler / Tekstil ve Konfeksiyon / 2017 / Cilt: 27 - Sayı: 2

AYAKKABI YÜZLÜK DERİLERİNİN BAZI FİZİKSEL KARAKTERİSTİKLERİ ÜZERINE FINISAJ TEKNİKLERİNİN ETKİLERİ

EFFECT OF FINISHING TECHNIQUES ON SOME PHYSICAL CHARACTERISTICS OF SHOE UPPER LEATHERS

Sayfa
198–203
Yayın Tarihi
2017-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sadece su buharı geçirgenliği istatistiksel olarak etkili bulunurken, diğer fiziksel test değerleri için anlamlı bir farklılık tespit edilememiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Anilin, pigment ve rugan finisaj tipleri yüzlük derilerin üretiminde kullanılan en yaygın finisaj teknikleridir.
📊
Temel Bulgular & Veri:Yüzlük derilere uygulanan farklı finisaj tipleri, derilerin fiziksel, fonksiyonel özelliklerine ilaveten konfor ve görünüm özelliklerini etkilemektedir.
💡
Sonuç & Katkı:Sadece su buharı geçirgenliği istatistiksel olarak etkili bulunurken, diğer fiziksel test değerleri için anlamlı bir farklılık tespit edilememiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Finisaj · hava geçirgenliği · ayakkabı giyim konforu

Özet

Anilin, pigment ve rugan finisaj tipleri yüzlük derilerin üretiminde kullanılan en yaygın finisaj teknikleridir. Yüzlük derilere uygulanan farklı finisaj tipleri, derilerin fiziksel, fonksiyonel özelliklerine ilaveten konfor ve görünüm özelliklerini etkilemektedir. Yüzlük derilerin fiziksel karakterizasyonu üzerine farklı finisaj türlerinin etkisini değerlendirmek için bu çalışmada dana ve keçi derileri kullanılmıştır. Anilin, pigment ve rugan finisaj işlemi görmüş mamul derilerin su buharı geçirgenliği, hava geçirgenliği ve ısıl direnç testleri yüzlük derilerin konfor özelliklerinin belirlenmesi için finisaj işlemi öncesi ve sonrası gerçekleştirilmiştir. Morfolojik karakterizasyon için masaüstü taramalı elektron mikroskobu (TSEM) kullanılmıştır. Su buharı ve hava geçirgenliği değerleri finisaj işlemi öncesi önemli ölçüde yüksek bulunmasına rağmen finisaj işlemleri sonrası daha düşük sonuçlar elde edilmiştir. Sadece su buharı geçirgenliği istatistiksel olarak etkili bulunurken, diğer fiziksel test değerleri için anlamlı bir farklılık tespit edilememiştir.

Abstract

Aniline, pigmented and patent finishing are the common techniques used for the production of shoe upper leathers. These different finishing types applied to shoe upper leathers have affected the physical and functional properties as well as the comfort and visual characteristics of the leathers. To evaluate the effects of different finishing types on physical characteristics of shoe upper leathers, calf and goat leathers were used in the study. The water vapor permeability, air permeability and thermal resistance tests of aniline, pigmented and patent finished leathers were performed prior and after the finishing processes for the determination of comport properties of upper leathers. For the morphological characterization, Table Top Scanning Electron Microscopy (TSEM) was used. The water vapor and air permeability values were found significantly high prior to finishing process, however lower results were determined after the applications. The only statistically significant effect was found for the water vapor permeability, although no significant difference was observed for the other physical test values.

🔖

Bu Makaleye Atıf Yap

ZENGİN, A. C. A., OĞLAKCIOĞLU, N., BİTLİSLİ, B. O. (2017). AYAKKABI YÜZLÜK DERİLERİNİN BAZI FİZİKSEL KARAKTERİSTİKLERİ ÜZERINE FINISAJ TEKNİKLERİNİN ETKİLERİ. Tekstil ve Konfeksiyon, Cilt: 27 - Sayı: 2, 198–203. https://ajindex.com/articles/46078

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Sarı Ö., 1983, “The wear physiology properties of wool products and their importance”, The Journal of Ege University Faculty of Agriculture, 20(3),101- 122
  2. Seventekin N., 1988, “The role of the textile materials on the regulation of human body temperature”, Textile and Machinery, 11(2), 246-250
  3. Huang J., 2006, “Thermal parameters for assessing thermal properties of clothing”, Journal of Thermal Biology, 31, 461-466
  4. Zhang P. and Gong R.H., 2001, “Clothing air permeability and moisture regain on human thermal regulation during exercise”, Texnitex 2001 Autex Conference, The University of Minho, Portugal, 216-226
  5. Ertekin G., Oglakcıoğlu N., Marmarali A., Eser B. and Pamuk M., 2015, “Thermal transmission attributes of knitted structures produced by using engineered yarns”, Journal of Engineered Fibers and Fabrics, 10(4),73-78
  6. Oglakcioğlu N. and Marmarali A., 2007, “Thermal comfort properties of some knitted structures”, Fibers and Textiles in Eastern Europe, 15 (5–6), 64–65
  7. Oglakcioglu N. and Kyosev Y., 2011, “About the computation of the effective thermal resistance of weft knitted structures”, Proceedings of 5th Aachen- Dresden International Textile Congress, Aachen, Germany, 24-25 November 2011, 1-4
  8. Ongel K. and Mergen H., 2009, “Review of literature about the effects of thermal comfort parameters on human body”, Medical Journal of Süleyman Demirel University, 16(1), 25-26
  9. Elahi Mangat A., Bajzik V., Hes L. and Büyük Mazari F., 2015, “The use of artificial neural networks to estimate thermal resistance of knitted fabrics”, Tekstil ve Konfeksiyon, 25(4), 304-312
  10. Boguslawska Baczek M. and Hes L., 2014, “Thermal conductivity and resistance of nomex fabrics exposed to salty water”, Tekstil ve Konfeksiyon, 24(2), 180-185
  11. Howie I., 1995, “Competing materials in shoemaking”, Leather International, 41-43
  12. Sarı O. and Bitlisli B.O., 2000, “The upper leather problems used for military footwear and boats”, Infantry Symposium, 2000, Istanbul
  13. Harvey A.J., 1982, “Footwear Materials and Process Technology”, Swiftprint Centre Ltd., New York, USA
  14. Bitlisli B.O., Karavana H.A., Başaran B. and Aslan A., 2004, “Importance of using genuine leather in shoe production in terms of foot comfort”, Journal of the Society of Leather Technologists and Chemists, 89, 107
  15. Sarı O.,1988, “The problems originated from finished leathers in footwear industry and their solutions”, The Seminar of Quality Control for Leather and Footwe