Dergiler / Tekstil ve Konfeksiyon / 2019 / Cilt: 29 - Sayı: 2

MEASURED CURRENT CHARACTERISTICS OF POWERED E-TEXTILE TRANSMISSION LINES WITH RESPECT TO WELDING PROCESS PARAMETERS

Sayfa
97–104
Yayın Tarihi
2019-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Desirability map showed that by selection of levels of factors applied throughout the study, a targeted actual current level can be reached with a very high precision (over 99%).

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Among the diverse range of techniques applied in manufacturing of wearable electronics, welding process appears to be one of the most promising, as it offers high protection and insulation without sacrificing textile comfort and quality expectations, however, a number of factors including material and processing types must be considered in order to reach a high quality welded e-textile with repeatable and accurate functionality.
📊
Temel Bulgular & Veri:Statistical analysis of the experimental data showed that applied voltage and linear resistance of conductive yarn were the highly significantly effective factors on obtained level of current when the welded e-textile samples are powered.
💡
Sonuç & Katkı:Desirability map showed that by selection of levels of factors applied throughout the study, a targeted actual current level can be reached with a very high precision (over 99%).
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:welding · electronic textiles (e-textiles) · current

Abstract

Among the diverse range of techniques applied in manufacturing of wearable electronics, welding process appears to be one of the most promising, as it offers high protection and insulation without sacrificing textile comfort and quality expectations, however, a number of factors including material and processing types must be considered in order to reach a high quality welded e-textile with repeatable and accurate functionality. In this study, in order to create an e-textile power transmission system, stainless steel conductive yarns were welded with three different types of multi-layered breathable, waterproof and windproof welding tapes on top of either polyester or polyamide textile fabrics under different welding process parameters. Current on the e-textile sample was measured and acquired via real-time measurements under different voltages applied. The effects of welding parameters together with material types at various applied voltages on electrical current passing through powered e-textile structure were statistically analyzed and discussed. Interaction of highly effective factors were presented using contour plots. Moreover, a desirability map was prepared for a targeted current. Statistical analysis of the experimental data showed that applied voltage and linear resistance of conductive yarn were the highly significantly effective factors on obtained level of current when the welded e-textile samples are powered. Desirability map showed that by selection of levels of factors applied throughout the study, a targeted actual current level can be reached with a very high precision (over 99%).

🔖

Bu Makaleye Atıf Yap

ŞAHİN, U. K., BAHADIR, S. K. (2019). MEASURED CURRENT CHARACTERISTICS OF POWERED E-TEXTILE TRANSMISSION LINES WITH RESPECT TO WELDING PROCESS PARAMETERS. Tekstil ve Konfeksiyon, Cilt: 29 - Sayı: 2, 97–104. https://ajindex.com/articles/45978

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Kursun Bahadir, S., Jevsnik, S., Optimization of Hot Air Welding Process Parameters for Manufacturing Textile Transmission Lines for E-textiles Applications: Part I: Electro-conductive Properties, Textile Research Journal, January 2017, 87(2), pp.232-243.
  2. Kursun Bahadir, S., Sahin, U.K., A Wearable Heating System with a Controllable E-Textile-Based Thermal Panel, in: J.H. Ortiz (Ed.), Wearable Technologies, Intechopen Ltd., London, 2018, ISBN 978-953-51-6081-6, in press
  3. You, D., Gao, X., Katayama, S., Monitoring of High-power Laser Welding using High-speed Photographing and Image Processing, Mechanical Systems and Signal Processing, December 2014, 49 (1-2), pp.39-52.
  4. Gao, X., Zhang, L., Liu, J., Zhang, J., A Comparative Study of Pulsed Nd: YAG Laser Welding and TIG Welding of Thin Ti6Al4V Titanium Alloy Plate, Materials Science and Engineering: A, January 2013, 559 (1), pp.14-21.
  5. Wu, Q., Gong, J.K., Chen, G.Y., Xu, L.Y., Research on Laser Welding of Vehicle Body, Optics & Laser Technology, March 2008, 40(2), pp.420-426.
  6. Boz, S., Erdogan, M.C., Ultrasonic Energy Usage in Apparel Industry, Textile and Apparel, June 2011, 21(1), pp.91-96
  7. He, Q., Yan, R., Kong, F., Du, R., Machine Condition Monitoring using Principal Component Representations, Mechanical Systems and Signal Processing, February 2009, 23(2), pp.446-466.
  8. He, Q., Kong, F. Yan, R., Subspace-based Gearbox Condition Monitoring by Kernel Principal Component Analysis, Mechanical Systems and Signal Processing, May 2007, 21(4), pp.1755-1772.
  9. Bartelmus, W., Zimroz, R., A New Feature for Monitoring the Condition of Gearboxes in Non-Stationary Operating Conditions, Mechanical Systems and Signal Processing, July 2009, 23(5), pp.1528-1534.
  10. Violleau, E., Ultrasonic Welding for Composite Materials, JEC Composites Magazine, March 2014, 87(1), pp.92-95
  11. Jana, P., Assembling Technologies for Functional Garments - An Overview, Indian Journal of Fibre & Textile Research, December 2011, 36(1), pp.380-387
  12. Kah, P., Martikainen, J., Current Trends in Welding Processes and Materials: Improve in Effectiveness, Reviews on Advanced Materials Science, September 2011, 30(2),