Dergiler / Avrupa Bilim ve Teknoloji Dergisi / 2019 / Cilt: 0 - Sayı: 17

İstilacıCentaurea Solstitialis Bitkisi Kullanılarak Sulu Çözeltilerden Malahit Yeşil Boya Giderimi ve Tepki Yüzey Yöntemi ile Optimizasyon: Kinetik, İzoterm ve Termodinamik Çalışma

Malachite Green Dye Removal from Aqueous Solutions Using Invader Centaurea Solstitialis Plant and Optimization by Response Surface Method: Kinetic, Isotherm, and Thermodynamic Study

Sayfa
755–768
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak adsorpsiyon işleminin Temkin izotermine (0,997 $R^2$ ) uyan yalancı ikinci dereceden ($R^2$ = 0.9982) bir kinetik reaksiyon olduğu bulunmuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:İstilacı bitkiler, tarım ürünlerinin gelişimini engelleyerek ürün verimini azaltmaktadır.
📊
Temel Bulgular & Veri:Deney tasarımı ve modellemesinde RSM kullanılmış ve korelasyon faktörü 0,984 olarak bulunmuştur.
💡
Sonuç & Katkı:Sonuç olarak adsorpsiyon işleminin Temkin izotermine (0,997 $R^2$ ) uyan yalancı ikinci dereceden ($R^2$ = 0.9982) bir kinetik reaksiyon olduğu bulunmuştur.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

İstilacı bitkiler, tarım ürünlerinin gelişimini engelleyerek ürün verimini azaltmaktadır. Bu çalışmada, sentetik bir boya olan Malachite Green (MG)'nin sulu çözeltiden uzaklaştırılmasında tarımsal atık olan istilacı Centaurea Solstitialis (CS) bitkisi adsorban olarak kullanılmıştır. Adsorbent - adsorbate ilişkisi, spektrofotometrik yöntem ve Fourier dönüşüm infrared (FTIR) ile incelenmiştir. Yüzey morfolojisi taramalı elektron mikroskobu (SEM) ile belirlenmiştir. CS yüzey alanı Brunauer, Emmett ve Teller (BET) analizi ile ölçülmüştür. Deney tasarımı ve modellemesinde RSM kullanılmış ve korelasyon faktörü 0,984 olarak bulunmuştur. Optimum çalışma koşulu olan 312.5 mg.$L^{-1}$MG içeren çözeltiye (pH=7.5) 0.325 g CS (30 mesh) koyularak 150 rpm’de 75 dakika çalkalanmıştır. Çalışmada CS tanecik boyutu 30 mesh ve çalkalama hızı 150 rpm sabit tutulmuştur. Optimum çalışma koşullarında CS’nin maksimum adsorpsiyon kapasitesi 90.816 mg.$g^{-1}$ bulunmuştur. Sonuçlar Langmuir, Freundlich, Temkin ve Dubinin-Radushkevich (DR) izotermleri ile değerlendirilmiştir. Sonuç olarak adsorpsiyon işleminin Temkin izotermine (0,997 $R^2$ ) uyan yalancı ikinci dereceden ($R^2$ = 0.9982) bir kinetik reaksiyon olduğu bulunmuştur. İntrapartikül difüzyon modeli, sırasıyla sınır difüzyon tabakası ve partikül içi difüzyon etkilerini göstermiştir. Adsorpsiyonun -4,47 KJ.$mol^{-1}$ Gibbs serbest enerjisi ile endotermik olduğu bulunmuştur. Desorpsiyon çalışmasında maksimum %2.16’lık bir verim elde edilmiştir. Bu sonuç CS üzerine adsorbe olan MG’nin tekrar suya karışma ihtimalinin düşük olduğunu göstermektedir. Daha sonra kolon çalışmalarına geçilmiştir. Kolonun verimliliği, 40. dakikada % 99.5'e ulaşmış ve bundan sonra sabit kalmıştır. Sonuç olarak, CS’nin, sulu çözeltiden MG gideriminde etkili bir adsorbent olduğu bulunmuştur

Abstract

Invasive plants reduce the yield by inhibiting the development of agricultural products. In this study, invasive (CS) plant which isagricultural waste was used as adsorbent for removal of Malachite Green (MG) from aqueous solution. The adsorbent - adsorbaterelationship was examined by the spectrophotometric method and Fourier transform infrared (FTIR). The surface morphology wasdetermined by scanning electron microscope (SEM). CS surface area was measured by Brunauer, the Emmett and Teller (BET)analysis. The experiments were designed and modeled by RSM. The correlation factor of the developed model was 0.984. Thecapacity of 90.816 mg.$g^{-1}$ was achieved when MG solution with concentration of 312.5 mg.$L^{-1}$ was adsorbed onto 0.325 g CS for 75min at a pH of 7.5. In this work the shaking velocity and the adsorbent size were 150 rpm and 30 mesh respectively. Langmuir,Freundlich, Temkin, and Dubinin-Radushkevich (D-R) isotherms were studied. Temkin isotherm had the highest $R^2$ of 0.997. Thekinetics models of the adsorption process were investigated and fitted with pseudo-second-order kinetic ($R^2$ = 0.9982). Theintraparticle diffusion model reflected the involved two steps; the first comprehended the boundary diffusion layer, while the secondintroduced the intraparticle diffusion effects. The adsorption was found to be endothermic with a Gibbs free energy of -4.47 KJ.$mol^{-1}$.It was noted that the adsorption process was irreversible with a max percentage of desorption process of 2.16%. Column experimentswere conducted to realize the adsorption process. The efficiency of the column reached 99.5% after 40 min and stilled constant. As aresult, CS has shown a potential for MG removal from aqueous solution.

🔖

Bu Makaleye Atıf Yap

ARSLAN, H., SALEH, M., YALVAÇ, M., GÜN, M. (2022). İstilacıCentaurea Solstitialis Bitkisi Kullanılarak Sulu Çözeltilerden Malahit Yeşil Boya Giderimi ve Tepki Yüzey Yöntemi ile Optimizasyon: Kinetik, İzoterm ve Termodinamik Çalışma. Avrupa Bilim ve Teknoloji Dergisi, Cilt: 0 - Sayı: 17, 755–768. https://ajindex.com/articles/458476

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Abd-El-Kareem, M., & Taha, H. (2012). Decolorization of malachite green and methylene blue by two microalgal species. Int J Chem Environ, 3, 297-302.
  2. Aharoni, C., & Ungarish, M. (1977). Kinetics of activated chemisorption. Part 2. Theoretical models. J. Chem. Soc. Faraday Trans., 73, 456–464.
  3. Aliyan, H., Fazaeli, R., & Jalilian, R. (2013). Fe3O4 at mesoporous SBA-15: a magnetically recoverable catalyst for photodegradation of. Appl Surf Sci, 276, 147–153. doi:10.1016/j.apsusc.2013.03.049 Bagheri, A. R., Arabi, M., Ghaedi, M., Ostovan, A., Wang, X., Li, J., & Chen, L. (2019). Dummy molecularly imprinted polymers based on a green synthesis strategy for magnetic solid-phase extraction of acrylamide in food samples. Talanta, 195, 390-400.
  4. Bai, C., Xiao, W., Feng, D., & al, e. (2013). Efficient decolorization of Malachite Green in the Fenton reaction catalyzed by [Fe (III)- salen] Cl complex. Chem Eng J, 215-216, 227-234. doi:10.1016/j.cej.2012.09.124 Bapat, S., & Jaspal, D. (2016). Parthenium hysterophorus: novel adsorbent for the removal of heavy metals and dyes. Glob. J. Environ. Sci. Manag., 2, 135-144. doi:http://dx.doi.org/10.7508/gjesm.2016.02.004.
  5. Belhouchat, N., Zaghouane-Boudiaf, H., & Viseras, C. (2017). Removal of anionic and cationic dyes from aqueous solution with activated organo-bentonite/sodium alginate encapsulated beads. Appl. Clay Sci, 135, 9-15.
  6. Bezerraa, M. A., Santelli, R. E., Oliveira, E. P., Villar, L. S., Ame, L., & Escaleira, l. (2008). Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta, 76, 965-977.
  7. Bojinova, A., & Dushkin, C. (2011). Photodegradation of malachite green in water solutions by means of thin films of TiO2/WO3 under visible light. React Kinet Mech Catal, 103, 239–250. Doi: 10.1007/s11144-011-0295-2
  8. Bouaziz, F., Koubaa, M., Kallel, F., Ghorbel, R. E., & Chaabouni, S. E. (2017). Adsorptive removal of malachite green from aqueous solutions by almond gum: Kinetic study and equilibrium isotherms. International Journal of Biological Macromolecules, 105, 56- 65. Chen, F., Ma, W., He, J., & Zhao, J. (2002). Fenton degradation of malachite green catalyzed by aromatic additives. J Phys Chem A, 106, 9485–9490. Doi: 10.1021/jp0144350 Chieng, H., Lim, L., & Priyantha, N. (2015). Enhancing adsorption capacity of toxic malachite green dye through chemically modified breadnut peel: equilibrium, thermodynamics, kinetics and regeneration studies. Environ Technol, 36, 86-97.
  9. Crittenden, J. C., Tr