KaydedilenlerDerginizi ekleyin

Dergiler / Avrupa Bilim ve Teknoloji Dergisi / 2015 / Cilt: 3 - Sayı: 6

Effects of Spark Plasma Sintering Parameters of Boron Carbide Ceramics Using Metallic Aluminum in Square Cross Section

Meral CENGİZ
S Çağrı ÖZER
A Beril TUĞRUL
Filiz Cinar SAHİN
Gültekin GÖLLER
Onuralp YÜCEL
Bülent BÜYÜK
Sayfa
14–16
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Characterisation results of monolithic B4C ceramics having 5 % aluminum in volume were compared with the results of monolithic B4C.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:B4C ceramics were fabricated by spark plasma sintering (SPS) technique with 5 vol. % aluminum as sintering additive.
📊
Temel Bulgular & Veri:Optimization of SPS method production parameters for B4C ceramics having geometries 50 x 50 x 5 mm, will be performed.
💡
Sonuç & Katkı:Characterisation results of monolithic B4C ceramics having 5 % aluminum in volume were compared with the results of monolithic B4C.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

B4C ceramics were fabricated by spark plasma sintering (SPS) technique with 5 vol. % aluminum as sintering additive. Optimization of SPS method production parameters for B4C ceramics having geometries 50 x 50 x 5 mm, will be performed. The sintering process was carried out at different temperatures by applying 40 MPa of pressure under vacuum. The effect of aluminum additive, sintering temperature and different soaking times on density, vickers hardness and fracture toughness values were examined. Gamma and neutron attenuation properties of boron carbide-aluminum (B4C+5 vol.%Al) composites were also investigated. Characterisation results of monolithic B4C ceramics having 5 % aluminum in volume were compared with the results of monolithic B4C.

🔖

Bu Makaleye Atıf Yap

CENGİZ, M., ÖZER, S. Ç., TUĞRUL, A. B., SAHİN, F. C., GÖLLER, G., YÜCEL, O., BÜYÜK, B. (2022). Effects of Spark Plasma Sintering Parameters of Boron Carbide Ceramics Using Metallic Aluminum in Square Cross Section. Avrupa Bilim ve Teknoloji Dergisi, Cilt: 3 - Sayı: 6, 14–16. https://ajindex.com/articles/458389

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (3)

  1. F. The´venot, Boron carbide--a comprehensive review, Journal of the European Ceramic Society 6 (1990) 205-225. DOI:http://dx.doi.org/10.1016/09552219(90)90048-K
  2. H. Lee, R.F. Speyer. Pressureless sintering of boron carbide, Journal of the American Ceramic Society 86 (2003) 1468- 1473. DOI: http://dx.doi.org/10.1111/j.1151-2916.2003.tb03498.x
  3. Omori, M., 2000. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS). Material Science and Engineering: A. 287(2): 183-18 DOI: http://dx.doi.org/10.1016/S0921-5093(00)00773-5 [4]Hayun, S., Kalabukhov, S., Ezersky, V., Dariel, M.P.,and Frage, N., 2009. Microstructural characterization of spark plasma sintered boron carbide ceramics, Ceramics International, 36: 451-457 DOI: http://dx.doi.org/10.1016/j.ceramint.2009.09.004 [5]Cengiz, M.,Yavas, B., Celik, Y., Goller, G., Yucel, O. and Sahin, F.C. (2014). Acta Physica Polonica A, 125. pp:260262 DOI: 10.12693/APhysPolA.125.260 [6]Buyuk B., Tugrul A.B., 2014. An investigation on gamma attenuation behavior of titanium diboride reinforced boron carbide-silicon carbide composites. Radiation Physics and Chemistry. 97, 354-359. [7] Buyuk B., Tugrul A.B., 2014. Gamma and neutron attenuation behaviours of boron carbide-silicon carbide composites. Annals of Nuclear Energy,71, 46-51.