Dergiler / Avrupa Bilim ve Teknoloji Dergisi / 2019 / Cilt: 0 - Sayı: 16

Görüntü İşleme ve Makine Öğrenmesi Yöntemleri ile Baca Gazı Sıcaklığının Tahmin Edilmesi

Estimation of Flue Gas Temperature by Image Processing and Machine Learning Methods

Sayfa
283–291
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Elde edilen sonuçlar baca gazı sıcaklığı ile alev görüntüsü arasında yüksek oranda bir ilişkiolduğunu göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu makalede, küçük ölçekli fındık kömürü yakıtlı brülörde baca gazı sıcaklığı tahmini ile ilgili deneysel bir çalışma sunulmaktadır.Baca gazı sıcaklığı yakıt türüne göre belli bir aralıkta olması gerekir aksi durumda kazanda korozyona sebep olmaktadır.
📊
Temel Bulgular & Veri:Alevgörüntüsü ve sıcaklık değeri aynı bilgisayara kaydedilmiştir.
💡
Sonuç & Katkı:Elde edilen sonuçlar baca gazı sıcaklığı ile alev görüntüsü arasında yüksek oranda bir ilişkiolduğunu göstermektedir.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu makalede, küçük ölçekli fındık kömürü yakıtlı brülörde baca gazı sıcaklığı tahmini ile ilgili deneysel bir çalışma sunulmaktadır.Baca gazı sıcaklığı yakıt türüne göre belli bir aralıkta olması gerekir aksi durumda kazanda korozyona sebep olmaktadır. Bu çalışmakapsamında alev görüntüsünden öznitelikler elde edilmiştir. Bu öznitelikler ve DVR modeli ile baca gazı sıcaklığı tahmin edilmiştir.Alev görüntüsü CCD kamera ile alınmıştır. Aynı zamanda referans baca gazı sıcaklığı, baca gazı analizörü ile alınmıştır. Alevgörüntüsü ve sıcaklık değeri aynı bilgisayara kaydedilmiştir. Alev görüntüsü gri seviye görüntüsüne çevrilerek öznitelikler eldeedilmiştir. Öznitelikler elde edilirken alev görüntüsünün yoğunluk dağılımı kullanılmıştır. Bu işlem için iki tip dağılım kullanılmıştır.Birincisi görüntünün histogramı alınarak konumdan bağımsız yoğunluk dağılımının elde edilmesidir. İkincisi satır ve sütuntoplamlarını kullanarak uzamsal yoğunluk dağılımının elde edilmesidir. Bu iki özniteliğin kombinasyonlarından elde edilenöznitelikler 6 çeşit DVR modeli ile gerçekleştirilmiştir. En iyi sonuçlar, her iki dağılımdan elde edilen özniteliklerin birliktekullanıldığı öznitelik çıkarma yöntemi için kübik DVR modeli ile elde edilmiştir. Önerilen modelde baca sıcaklığı (T °C) R =0.97 doğruluk ile tahmin edilmiştir. Elde edilen sonuçlar baca gazı sıcaklığı ile alev görüntüsü arasında yüksek oranda bir ilişkiolduğunu göstermektedir.

Abstract

This paper presents an experimental study on the flue gas temperature estimation in small-scale nut coal-fired boiler. The flue gas temperature must be within a certain range depending on the fuel type, otherwise it causes corrosion in the boiler. Within the scope of this study, features were obtained from flame image. The flue gas temperature was estimated with these features and the SVR model. The flame image was taken with a CCD camera. At the same time, the reference flue gas temperature was taken with the flue gas analyzer. The flame image and temperature are recorded on the same computer. Flame image is converted to gray scale image and features are obtained. The intensity distribution of the flame image was used when obtaining the features. Two types of distribution were used for this process. The first is the histogram of the flame image to obtain a location independent intensity distribution. The second is to obtain a spatial intensity distribution using row and column sums. The attributes obtained from the combinations of these two type features were performed with 6 kinds of SVR models. The best results were obtained for the cubic SVR model for the feature extraction method in which the attributes obtained from both distributions were used together. In the proposed model the flue temperature (T ° C) was estimated with R = 0.97 accuracy. The results show that there is a high correlation between the flue gas temperature and the flame image.

🔖

Bu Makaleye Atıf Yap

GOLGİYAZ, S., ONAT, C., TALU, M. F. (2022). Görüntü İşleme ve Makine Öğrenmesi Yöntemleri ile Baca Gazı Sıcaklığının Tahmin Edilmesi. Avrupa Bilim ve Teknoloji Dergisi, Cilt: 0 - Sayı: 16, 283–291. https://ajindex.com/articles/458221

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (6)

  1. Baek, W. B., S. J. Lee, S. Y. Baeg, and C. H. Cho. 2001. “Flame Image Processing & Analysis for Optimal Coal Firing of Thermal Power Plant.” {ISIE 2001: IEEE International Symposium on Industrial Electronics Proceedeing, Vols I-III} {928-931}.
  2. Bilgin, Abdullah. 2011. “Kazanlarda Enerji Verimliliği ve Emisyonlar.” Pp. 59–65 in VIII. Ulusal Tesisat Mühendisliği Kongresi. İzmir: TMMOB Makina Mühendisleri Odası. Bonefacic, Igor, Paolo Blecich, I. Bonefačić, and -P Blecich. 2015. Two-Color Temperature Measurement Method Using BPW34 PIN Photodiodes. Vol. 35. Conti, John, Paul Holtberg, Jim Diefenderfer, Angelina LaRose, James T. Turnure, and Lynn Westfall. 2016. International Energy Outlook 2016 With Projections to 2040.
  3. GoldsWorthy, P., D. J. Eyre, and E. On. 2013. Value-in-Use (VIU) Assessment for Thermal and Metallurgical Coal. Vol. 2. Golgiyaz, Sedat, Muhammed Fatih Talu, and Cem Onat. 2016. “Estimation of Excess Air Coefficient for Automated Feed Coal Burners with Image-Based Gauss Model.” Pp. 528–31 in International Conferece on Artificial Intelligence and Data Processing, IDAP’16. Malatya-Turkey. González-Cencerrado, A., A. Gil, and B. Peña. 2013. “Characterization of PF Flames under Different Swirl Conditions Based on Visualization Systems.” Fuel 113:798–809. González-Cencerrado, A., B. Peña, and A. Gil. 2012. “Coal Flame Characterization by Means of Digital Image Processing in a SemiIndustrial Scale PF Swirl Burner.” Applied Energy 94:375–84.
  4. Hanbay, Kazim, Sedat Golgiyaz, and Muhammed Fatih Talu. 2017. “Real Time Fabric Defect Detection System on Matlab and C++/Opencv Platforms.” Pp. 1–8 in 2017 International Artificial Intelligence and Data Processing Symposium (IDAP). IEEE. Huang, Benyuan, Zixue Luo, and Huaichun Zhou. 2010. “Optimization of Combustion Based on Introducing Radiant Energy Signal in Pulverized Coal-Fired Boiler.” Fuel Processing Technology 91(6):660–68.
  5. Jiang, Zhi-Wei Wei, Zi-Xue Xue Luo, and Huai-Chun Chun Zhou. 2009. “A Simple Measurement Method of Temperature and Emissivity of Coal-Fired Flames from Visible Radiation Image and Its Application in a CFB Boiler Furnace.” Fuel 88:980–87.
  6. Krabicka, Jan, Gang Lu, and Yong Yan. 2010. “A Spectroscopic Imaging System for Flame Radical Profiling.” Pp. 1387–91 in 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings. IEEE. Li, Nan, Gang Lu, Xinli Li, and Yong Yan. 2014. “Prediction of Pollutant Emissions of Biomass Flames Using Digital Imaging, Contourlet Transform and Radi