Dergiler / Avrupa Bilim ve Teknoloji Dergisi / 2019 / Cilt: 0 - Sayı: 17

The Effect of Fabric Structural Geometry on Thermal Transfer Performance in Sportswear

Sayfa
711–717
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Fabric surface temperature changes on differentclothed body parts investigated by an infrared thermal camera and analysed in thermal camera software (Flir Tools) for thermaltransfer performance according to the wearing protocol.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Especially for textiles, which contain open structure pores, airflow carrying heat energy transfers from one side to another side byconduction and convection.
📊
Temel Bulgular & Veri:Convective heat transfer plays a very important role in thermal transfer performance of textiles due to itsporous structure.
💡
Sonuç & Katkı:Fabric surface temperature changes on differentclothed body parts investigated by an infrared thermal camera and analysed in thermal camera software (Flir Tools) for thermaltransfer performance according to the wearing protocol.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Especially for textiles, which contain open structure pores, airflow carrying heat energy transfers from one side to another side byconduction and convection. Convective heat transfer plays a very important role in thermal transfer performance of textiles due to itsporous structure. Compression sportswear are generally produced from knitted porous stretch fabrics, which get extended on wearingand remain in the extended state. Since they are worn next to skin and are direct contact with the body surface, their thermal comfortproperties are effective on overall clothing comfort. Perhaps the greater contact of the garment to the skin together with the constantairflow can transfer the heat better from the body to the environment. Most of the well-known auxetic materials possess porousmicrostructures and the sizes of the pores of auxetic materials can vary during the compressive and tensile deformation. In this study,an investigation has been made to evaluate the auxetic effect on the thermal transfer performance of clothing. Two type fabrics havingthe very similar fabric properties but different knitting structures were provided from the market and producer. While one has anauxetic structure, the other has a standard warp knitting structure commonly used in market. As permeability and porosity are stronglyrelated to each other, we compared air permeability of fabrics in extended state considering the fabric extension results taken fromvirtual avatar having the same body measurements as subjects in 3D simulation. Fabric surface temperature changes on differentclothed body parts investigated by an infrared thermal camera and analysed in thermal camera software (Flir Tools) for thermaltransfer performance according to the wearing protocol.

🔖

Bu Makaleye Atıf Yap

GÜNEY, S., BALCI, H., ÜÇGÜL, İ. (2022). The Effect of Fabric Structural Geometry on Thermal Transfer Performance in Sportswear. Avrupa Bilim ve Teknoloji Dergisi, Cilt: 0 - Sayı: 17, 711–717. https://ajindex.com/articles/458060

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Liu, R., Little, T. and Williams, Jr., Compression Form-fitted Athletic Wear: Pressure Performance, Moisture Management Properties under Different Tension Ratios and Corresponding Psychophysical Responses, Fiber and Polymers, (2014), Vol.15 (3), pp.632-644
  2. Gupta, D., Chattopadhyay, R. and Bera, M., Comfort properties of pressure garments in extended state, Indian Journal of Fibre&Textile Research, (2011), Vol.36, pp.415-421
  3. D Fournet, D. and Havenith, G., (2017), Assessment of Sport Garments Using Infrared Thermography, Application of Infrared Thermography in Sports Science, Chapter 7, pp 159-183
  4. Ma, P., Chang, Y., Boakye, A. and Jiang, G., (2017), Reviw on the knitted structures with auxetic effect, The Journal of The Textile Institute, Vol.108, 6, 947-961
  5. Hu H, Wang Z, Liu S (2011) Development of auxetic fabrics using flat knitting technology. Text Res J 81: 1493-1502
  6. Liu Y, Hu H, Lan JKC, Liu S (2010) Negative Poisson's raito weft-knitted fabrics. Text Res J 80: 856-863
  7. Glazzard M, Breedon P (2013) Weft-knitted auxetic textile design. Physica Status Solidi B 251: 267-272
  8. Ugbolue SC, Kim YK, Warner SB, Fan Q, Yang C, et al. (2012) Engineered warp knit auxetic fabrics. Text Sci Eng 2
  9. Alderson K, Alderson A, Anand S, Simkins V, et al. (2012) Auxetic warp knit textile structures. Physica Status Solidi B 7: 1322- 1329
  10. Gibson,L. J., Ashby, M.F., Schajer, G.S. and Robertson, C.I., (1982), The mechanics of two-dimensional cellular materials, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 382, 25-42
  11. Ma, P., Chang, Y., & Jiang, G. (2015). Design and fabrication of auxetic warp-knitted structures with a rotational hexagonal loop. Textile Research Journal
  12. Wang, Z., & Hu, H. (2014a). 3D auxetic warp-knitted spacer fabrics. physica status solidi (b), 251, 281–288.