Dergiler / Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi / 2019 / Cilt: 29 - Sayı: 3

FARKLI DEZENFEKSİYON YÖNTEMLERİNİN CAD / CAM VE KONVANSİYONEL AKRİLİK REZİNLERİN YÜZEY SERTLİĞİNE ETKİSİ

EFFECT OF VARIOUS DISINFECTION METHODS ON THE SURFACE HARDNESS OF CAD/CAM AND CONVENTIONAL ACRYLIC RESINS

Sayfa
468–473
Yayın Tarihi
2022-10-10
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Yüzey sertliği ölçümleri (Vickers Sertliği),2 yönlü ANOVA ve Tukey’s Honestly SignificantDifference testi (α=.05) kullanılarak analiz edilmiştir.Bulgular: Tüm gruplarda en yüksek yüzey sertlikdeğerleri kontrol gruplarında bulunmuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Amaç: Bu çalışmanın amacı, farklı dezenfeksiyonyöntemlerinin (%2 glutaraldehit, %5 sodyumhipoklorit ve mikrodalga) yeni üretilen prefabrikeolarak polimerize edilmiş CAD/CAM akrilik rezin, ısı ileve kimyasal polimerize olan akrilik rezinlerin yüzeysertliği üzerindeki etkisini değerlendirmektir.Gereç ve yöntem: 15 mm çapında 2 mmkalınlığında disk şeklinde hazırlanan örnekler kontrolve 3 farklı test grubuna ayrılmıştır (n = 8): Grup 1:kontrol, 37°C'de distile su içinde; Grup 2: %2’likglutaraldehit; Grup 3: %5’lik sodyum hipoklorit; Grup4: mikrodalga dezenfeksiyonu (650 W / 6 dak).
📊
Temel Bulgular & Veri:G2 veG3 örnekleri bir saat boyunca dezenfektan solüsyondabekletilmiştir.
💡
Sonuç & Katkı:Yüzey sertliği ölçümleri (Vickers Sertliği),2 yönlü ANOVA ve Tukey’s Honestly SignificantDifference testi (α=.05) kullanılarak analiz edilmiştir.Bulgular: Tüm gruplarda en yüksek yüzey sertlikdeğerleri kontrol gruplarında bulunmuştur.
🔬Tür:Araştırma Makalesi
📍Kapsam:3 örnek
⚙️Değişkenler:Alan Parametreleri

Özet

Amaç: Bu çalışmanın amacı, farklı dezenfeksiyonyöntemlerinin (%2 glutaraldehit, %5 sodyumhipoklorit ve mikrodalga) yeni üretilen prefabrikeolarak polimerize edilmiş CAD/CAM akrilik rezin, ısı ileve kimyasal polimerize olan akrilik rezinlerin yüzeysertliği üzerindeki etkisini değerlendirmektir.Gereç ve yöntem: 15 mm çapında 2 mmkalınlığında disk şeklinde hazırlanan örnekler kontrolve 3 farklı test grubuna ayrılmıştır (n = 8): Grup 1:kontrol, 37°C'de distile su içinde; Grup 2: %2’likglutaraldehit; Grup 3: %5’lik sodyum hipoklorit; Grup4: mikrodalga dezenfeksiyonu (650 W / 6 dak). G2 veG3 örnekleri bir saat boyunca dezenfektan solüsyondabekletilmiştir. Yüzey sertliği ölçümleri (Vickers Sertliği),2 yönlü ANOVA ve Tukey’s Honestly SignificantDifference testi (α=.05) kullanılarak analiz edilmiştir.Bulgular: Tüm gruplarda en yüksek yüzey sertlikdeğerleri kontrol gruplarında bulunmuştur. Prefabrikeolarak polimerize edilmiş CAD/CAM akrilik rezinlerbütün gruplarda en yüksek yüzey sertliği göstermiştir(p

Abstract

Aim: The aim of the current study was to assess the effect of simulated disinfections (2% glutaraldehyde, 5% sodium hypochlorite, and microwave) on the surface hardness of newly introduced pre-polymerized acrylic resin, heat and self cured acrylic resin. Materials and Methods: Disc shaped specimens, 15 mm diameter and 2 mm thickness, were divided into a control and 3 test groups (n=8): Group 1: control, stored in distilled water at 37°C; Group 2: 2% glutaraldehyde; Group 3: 5% sodium hypochlorite; Group 4: microwave disinfection (650 W/6 min). G1 to G3 were immersed for an hour in the disinfectant solution. Measurements of surface hardness (Vickers Hardness) were analyzed using 2-way ANOVA and Tukey’s Honestly Significant Difference (HSD) test (α=.05). Results: The control groups showed the highest surface hardness values in all groups. Pre-polymerized block acrylic resin showed the highest surface hardness in all of the groups (p

🔖

Bu Makaleye Atıf Yap

DAYAN, S. Ç. (2022). FARKLI DEZENFEKSİYON YÖNTEMLERİNİN CAD / CAM VE KONVANSİYONEL AKRİLİK REZİNLERİN YÜZEY SERTLİĞİNE ETKİSİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, Cilt: 29 - Sayı: 3, 468–473. https://ajindex.com/articles/451799

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. ADA Council on Scientific Affairs and ADA Council on Dental Practice: Infection control recommendations for the dental office and the dental laboratory. J Am Dent Assoc 1996;127:672-80.
  2. Vafaee F, Radan P, Firouz F, et al: Microbial contamination of pumice powder and slurry in dental laboratories of Hamadan. Avi J Dent Res 2013;5:e19377. Savabi O, Attar K, Nejatidanesh F, Goroohi H, Badrian H. Effect of different chemical disinfectants on the flexural strength of heat-polymerized acrylic resins. Eur J Prosthodont Restor Dent 2013;21:105-8.
  3. Vasconcelos LR, Consani RLX, Mesquita MF, Sinhoreti MAC. Effect of chemical and microwave disinfection on the surface microhardness of acrylic resin denture teeth. J Prosthodont 2013;22:298– 303. Pawashe KG, Tewary S, Sanyal PK, Nilesh K. An In vitro Comparative Evaluation of Disinfectants on Standard and Clinical Microbial Strains on Heat Cure Resins. J Clin Diagn Res 2017;11:ZC54-ZC58 Muscat Y, Farrugia C, Camilleri L, Arias‐Moliz MT, Valdramidis V, Camilleri J. Investigation of acrylic resin disinfection using chemicals and ultrasound. J Prosthodont 2018;27:461-468.
  4. Harrison Z, Johnson A, Douglas WI. An in vitro study into the effect of a limited range of denture cleaners on surface roughness and removal of Candida albicans from conventional heat-cured acrylic resin denture base material. J Oral Rehabil 2004;31:460–67.
  5. Iseri U, Uludamar A, Ozkan YA. Effectiveness of different cleaning agents on the adherence of Candida albicans to acrylic denture base resin. Gerodontology 2011;28:271–76.
  6. Silva MM, Vergani CE, Giampaolo ET, Neppelenbroek KH, Spolidorio DM, Machado AL, et al. Effectiveness of microwave irradiation on the disinfection of complete dentures. Int J Prosthodont 2006;19:288–93.
  7. Gandhi N, Daniel S, Benjamin S, Kurian N, Varghese VS. Evaluation of surface microhardness following chemical and microwave disinfection of commercially available acrylic resin denture teeth. J Clin Diagn Res 2017;1:ZC87-ZC91 Çetindağ MT, Meşe A. Diş hekimliğinde kullanılan CAD/CAM (Bilgisayar Destekli Tasarım/Bilgisayar Destekli Üretim) sistemleri ve materyaller. J Dent Fac Atatürk Uni 2016;26:524-33. Ayman AD. The residual monomer content and mechanical properties of CADCAM resins used in the fabrication of complete dentures as compared to heat cured resins. Electronic physician 2017;9:4766. Srinivasan M, Gjengedal H, Cattani-Lorente M, Moussa M, Durual S, Schimmel M, Müller F. CAD/CAM milled complete removable dental prostheses: An i