KaydedilenlerDerginizi ekleyin

Dergiler / Sigma Mühendislik ve Fen Bilimleri Dergisi / 2016 / Cilt: 34 - Sayı: 2

ANALYSIS OF A LONG STRIP CONTAINING AN INTERNAL OR EDGE CRACK USING FEM

Murat YAYLACI
Ahmet BİRİNCİ
Gökhan ADIYAMAN
Erdal ÖNER
Sayfa
269–278
Yayın Tarihi
2016-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Finally, the results obtained from the finite element analysis are verified by comparing with analytical ones and it is seen that the results from finite element analysis indicate a good agreement with the analytical solution.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper presents the elastostatic plane problem of a long strip containing an internal or edge crack perpendicular to its boundaries.
📊
Temel Bulgular & Veri:The plane problem consists of an infinitely long strip of thickness h.
💡
Sonuç & Katkı:Finally, the results obtained from the finite element analysis are verified by comparing with analytical ones and it is seen that the results from finite element analysis indicate a good agreement with the analytical solution.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Elastic layer · simple support · finite element model

Abstract

This paper presents the elastostatic plane problem of a long strip containing an internal or edge crack perpendicular to its boundaries. The plane problem consists of an infinitely long strip of thickness h. The infinitely long strip is loaded by uniformly distributed load and rests on two simple supports. It is assumed that the effect of gravity is neglected. The finite element model of the problem is constituted using ANSYS software and the two dimensional analysis of the problem is carried out. Normalized stress-intensity factors for the cases with internal and edge crack, and normal stress (x) for uncracked layer case are obtained for various dimensionless quantities. Finally, the results obtained from the finite element analysis are verified by comparing with analytical ones and it is seen that the results from finite element analysis indicate a good agreement with the analytical solution.

🔖

Bu Makaleye Atıf Yap

YAYLACI, M., BİRİNCİ, A., ADIYAMAN, G., ÖNER, E. (2016). ANALYSIS OF A LONG STRIP CONTAINING AN INTERNAL OR EDGE CRACK USING FEM. Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 34 - Sayı: 2, 269–278. https://ajindex.com/articles/419282

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Birinci, A. and Erdöl, R., (2004) A Layered Composite Containing a Crack in its Lower Layer Loaded by a Rigid Stamp, European Journal of Mechanics A/Solids 23, 909–924
  2. Lowengrub, M., (1966) A Two-Dimensional Crack Problem, International Journal of Engineering Science 4, 289–299
  3. Gupta, G. D. and Erdogan, F., (1974) The Problem of Edge Cracks in an Infinite Strip, Journal of Applied Mechanics 41, 1001-1006
  4. Bakioglu, M. and Erdogan, F., (1977) The Crack-Contact and the Free-End Problem for a Strip under Residual Stress, Journal of Applied Mechanics 44, 41-46
  5. Nied, H. F. and Erdogan, F., (1983) The elasticity problem for a thick-walled cylinder containing a circumferential crack, International Journal of Fracture 22, 277-301
  6. Hong, H. and Chen, J., (1988) Derivations of Integral Equations of Elasticity, Journal of Engineering Mechanics 114(6), 1028–1044
  7. Chen, Y.Z., (1995) A Survey of New Integral Equations in Plane Elasticity Crack Problem, Engineering Fracture Mechanics 51, 97–134
  8. Beghini, M. and Bertini, L., (1996) Effective Stress Intensity Factor and Contact Stress for a Partially Closed Griffith Crack in Bending, Engineering Fracture Mechanics 54, 667-678
  9. Kadioğlu, S., Dag, S. and Yahsi, S., (1998) Crack Problem for a Functionally Graded Layer on an Elastic Foundation, International Journal of Fracture 94, 63–77
  10. Shbeeb, N.I. and Binienda, W.K., (1999) Analysis of an Interface Crack for a Functionally Graded Strip Sandwiched between Two Homogeneous Layers of Finite Thickness, Engineering Fracture Mechanics 64, 693-720
  11. Chen, Y.Z., (1999) A Contact Crack Problem in an Infinite Plate, International Journal of Engineering Science 37, 621–630
  12. Chen, J.T. and Hong, H.-K., (1999) Review of Dual Boundary Element Methods with Emphasis on Hypersingular Integrals and Divergent Series, Applied Mechanics Reviews 52(1), 17-33
  13. Choi, H. J., (2001) The Problem for Bonded Half-Planes Containing a Crack at an Arbitrary Angle to the Graded Interfacial Zone, International Journal of Solids and Structures 38, 6559-6588
  14. Dag, S. and Erdogan, F., (2002) A Surface Crack in a Graded Medium Loaded by a Sliding Rigid Stamp, Engineering Fracture Mechanics 69, 1729–1751
  15. Chen, J., Liu, Z. and Zou, Z., (2002) Transient Internal Crack Problem for a Nonhomogeneous Orthotropic Strip (Mode I), International Journal of Engineering Science 40, 1761–1774
  16. Yue, Z.Q., Xiao, H.T. and Tham, L.G., (2003) Boundary Eleme