Dergiler / Sigma Mühendislik ve Fen Bilimleri Dergisi / 2017 / Cilt: 35 - Sayı: 3

ESTIMATION OF PORK LARD BIODIESEL PROPERTIES FROM ITS FATTY ACID METHYL ESTER PROFILE BY GC-MS

Sayfa
457–469
Yayın Tarihi
2017-09-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The estimated values from FAME profile were found to be very close to the experimental values from ASTM method, hence rigorous laboratory experiments could be mitigated thereby saving cost, time and energy.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The estimation of some fuel properties of pork lard biodiesel from its fatty acid methyl ester (FAME) composition was investigated.
📊
Temel Bulgular & Veri:The values of the fuel properties from the laboratory test using ASTM methods were correlated with that obtained from their calculation from the fatty acid methyl profile and an average absolute deviation (AAD) of 4.61, 3.96, 3.10, and 0.78% for iodine value, saponification value, cetane number and higher heating value, respectively were recorded.
💡
Sonuç & Katkı:The estimated values from FAME profile were found to be very close to the experimental values from ASTM method, hence rigorous laboratory experiments could be mitigated thereby saving cost, time and energy.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Pork lard · transesterification · fatty acid methyl ester

Abstract

The estimation of some fuel properties of pork lard biodiesel from its fatty acid methyl ester (FAME) composition was investigated. Pork lard biodiesel was produced via transesterification of pork lard and methanol using potassium hydroxide catalyst. The biodiesel was characterized to determine the physico-chemical properties according to American Society for Testing and Materials(ASTM) methods. The FAME composition of the produced biodiesel was analyzed with Gas chromatography-Mass spectrometer (GC-MS). The values of the fuel properties from the laboratory test using ASTM methods were correlated with that obtained from their calculation from the fatty acid methyl profile and an average absolute deviation (AAD) of 4.61, 3.96, 3.10, and 0.78% for iodine value, saponification value, cetane number and higher heating value, respectively were recorded. Methyl oleate (C18H34O2) was found to be the dominant ester with percentage composition of 42.6%. The estimated values from FAME profile were found to be very close to the experimental values from ASTM method, hence rigorous laboratory experiments could be mitigated thereby saving cost, time and energy.

🔖

Bu Makaleye Atıf Yap

B., E. C., N., U. C., D., O. O. (2017). ESTIMATION OF PORK LARD BIODIESEL PROPERTIES FROM ITS FATTY ACID METHYL ESTER PROFILE BY GC-MS. Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 35 - Sayı: 3, 457–469. https://ajindex.com/articles/419240

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Alptekin,E., Canakci,M.,(2008). Determination of the density and the viscosities of biodiesel-fuel blends. Renewable Energy, 33(12), 2623 – 2630
  2. Board NB., (2009). National Biodiesel Board.Available at www.biodiesel.org
  3. Demirbas,A.,(1998). Fuel properties and calculation of higher heating values of vegetable oils. Fuel, 77, 1117-20
  4. Demirabas, A., (2005). Biodiesel production from vegetable oils via catalytic and non-catalytic supercritical methanol transesterification methods. Journal of Progress Energy Combustion Science, 31, 466-487
  5. Demirabas, A.,(2008). Biofuel sources, Biofuel policy, Biofuel Economy and Global Biofuel Projection, Journal of Energy Conversion and Management, 49, 2106 – 2116
  6. Dias,J.M.,Ferraz,C.A.,Almeida,F.M.,(2008).Using mixtures of waste frying oil and porklard to produceBiodiesel.World Academy of science and technology 44, 258 – 262
  7. Encinar,J.M.,Gonzalez,J.F.,Rodriguez-Reinares,A.,(2007). Ethanolysis of used frying oil. Biodiesel preparation and characterization.Fuel Processing Technology, 88, 513- 522
  8. Encinar, J.M., Sanchez, N., Martinez, G., Garcia, L., (2011). Study of biodiesel production from Animal fats with high free fatty acid content. Bioresour. Technol.102, 10907 – 10914
  9. Ferrari, R.A., Pighinelli,T.A., Park,K.J.,(2010). Biodiesel production and quality. Biofuel’s Engineering Process Technology, Dr. Marco Aurelio Dos Santos Bernardes (Ed.), ISBN: 978-953-307-480-1, InTech, Available from: http://www.intechopen.com/books/biofuel-s-engineering-processtechnology/biodiesel- production-and-quality
  10. Freedman,B.,Pryde,E.H.,Mounts,T.L.,(1984). Variables affecting the yield of fatty esters from transesterified vegetable oils. Journal of American Oil Chemical Society 61(10), 1638-1643
  11. Furuta,S.,Matsuhasi,H.,Arata,K.,(2006). Biodiesel fuel production with solid amorphous-zirconiacatalysts in fixed bed reactor. Biomass Bioenergy, 30, 870 – 873
  12. Hoque,M.E.,Singh,A.,Chuan,L.Y.,(2010). Biodiesel from low cost feedstock:The effects of process parameters on the biodiesel yield. Biomass and Bioenergy 35, 1582 – 1587
  13. Gaby,W. and Peter,S.L.,(1997). Boiling point properties and thermal decomposition of vegetableoils methyl esters with regard to their fuel stability. Journal of Agriculture Food Chemistry, 45, 4748 – 4752
  14. Gopinath, A., Puhan, S. and Nagarajan, G., (2009).Theoretical modeling of iodine value and saponification value of biodiesel fuels from their fatty acid com