KaydedilenlerDerginizi ekleyin

Dergiler / Sigma Mühendislik ve Fen Bilimleri Dergisi / 2019 / Cilt: 37 - Sayı: 3

EFFECTS OF INFILL WALLS ON FREE VIBRATION CHARACTERISTICS OF MULTI-STOREY FRAMES USING DYNAMIC STIFFNESS METHOD

Baran BOZYİGİT
Yusuf YESİLCE
Sayfa
885–902
Yayın Tarihi
2020-09-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is seen from the results that ignoring effects of infill walls may cause significant errors on calculation of natural frequencies of frames.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study aims to obtain exact natural frequencies and mode shapes of infilled multi-storey frames using single variable shear deformation theory (SVSDT) which considers parabolic transverse shear stress distribution across the cross-section.
📊
Temel Bulgular & Veri:The effects of infill walls on free vibration characteristics are investigated for different frame models such as one storey infilled, soft storey and fully infilled.
💡
Sonuç & Katkı:It is seen from the results that ignoring effects of infill walls may cause significant errors on calculation of natural frequencies of frames.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Infilled frame · mode shape · natural frequency

Abstract

This study aims to obtain exact natural frequencies and mode shapes of infilled multi-storey frames using single variable shear deformation theory (SVSDT) which considers parabolic transverse shear stress distribution across the cross-section. The effects of infill walls on free vibration characteristics are investigated for different frame models such as one storey infilled, soft storey and fully infilled. The infill walls are modeled using equivalent diagonal strut approach. Natural frequencies are calculated via dynamic stiffness formulations for different wall thickness values. The results of SVSDT are tabulated with Euler-Bernoulli beam theory (EBT) and Timoshenko beam theory (TBT) results. Additionally, finite element solutions are presented to verify the natural frequencies that obtained from dynamic stiffness formulations. The results show that SVSDT can be used effectively for free vibration analysis of infilled frame structures by using dynamic stiffness formulations. The numerical analyses show that the effects of shear deformation and rotation inertia become observable for higher modes of infilled frame structures. It is seen from the results that ignoring effects of infill walls may cause significant errors on calculation of natural frequencies of frames.

🔖

Bu Makaleye Atıf Yap

BOZYİGİT, B., YESİLCE, Y. (2020). EFFECTS OF INFILL WALLS ON FREE VIBRATION CHARACTERISTICS OF MULTI-STOREY FRAMES USING DYNAMIC STIFFNESS METHOD. Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 37 - Sayı: 3, 885–902. https://ajindex.com/articles/419157

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Polyakov S.V., (1950) Investigation of the strength and of the deformational characteristics of masonry filler walls and facing on framed structures, Construction Industry Instıtute 3
  2. Holmes M., (1961) Steel Frames with brick work and concrete infilling, Proceedings of Institution of the Civil Engineers 19, 473-478
  3. Holmes M., (1963) Combined Loading on Infilled Frames, Proceeding of The Institution of Civil Engineers 25, 31-38
  4. Stafford S.B. and Carter C., (1969) A method of analysis for infill frames, Proceedings of the Institution of Civil Engineers 44(1), 31-48
  5. Mainstone R.J., (1974) Supplementary Note on the Stiffness and Strenght of Infilled Frame, Building Research Establishment, London, England
  6. El-Dakhakhni W.W., Elgaaly M. and Hamid A.A., (2003) Three-Strut Model for Concrete Masonary-Infilled Steel Frames, Journal of Structural Engineering 129(2), 177-185
  7. Eurocode 6, (1996) Design of masonry structures-Part 1-1: General rules for reinforced and unreinforced masonry structures, European Committee for Standardization, Brussels, Belgium
  8. FEMA-356, (2000) Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington, DC
  9. TSDC, (2007) Turkish seismic design code, Ministry of Public Works and Settlement, Ankara, Turkey
  10. Reflak J. and Fajfar P., (1991) Elastic analysis of infilled frames using substructures, 6th Canadian Conf. on Earthquake Engineering, University of Toronto Press, Toronto
  11. Mohebkhah A., Tasnimi A.A. and Moghadam H.A., (2008) Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method. Journal of Constructional Steel Research 64(12), 1463-1472
  12. Mondal G. and Jain S.K., (2008) Lateral stiffness of masonry infilled reinforced concrete (RC) frames with central opening, Earthquake Spectra 24(3), 701-723
  13. Stavridis A. and Shing P.B., (2010) Finite-element modeling of nonlinear behavior of masonry-infilled RC frames, Journal of Structural Engineering 136(3), 285-296
  14. Moaveni B., Stavridis A., Lombaert G., Conte J.P. and Shing P.B., (2013) Finite-element model updating for assessment of progressive damage in a 3-story infilled RC frame, Journal of Structural Engineering 139(10), 1665-1674
  15. Ozturkoglu O., Ucar T. and Yesilce Y., (2017) Effect of masonary infill walls with openings on nonlinear response of reinforced concrete frames, Earthquakes and Structures 12(3), 333-347