Dergiler / El-Cezeri / 2022 / Cilt: 9 - Sayı: 1

Statik Yükleme Altında Oksetik İç Yapılı Sandviç Kompozitlerin İncelenmesi

Investigation of Sandwich Composites with Auxetic Core under Static Loading

Sayfa
350–359
Yayın Tarihi
2022-01-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu çalışma kapsamında mukavemet ve darbe absorbsiyonu açısından sandviç yapılarda kullanılan oksetik yapıların arasındaki mesafenin yapının kalınlığından daha önemli bir parametre olduğu ortaya konulmuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Sandviç kompozitler, farklı malzeme kombinasyonları ile birleştirilerek özel uygulamalar için oluşturulabilen optimum malzeme tasarımlarıdır.
📊
Temel Bulgular & Veri:Çok sayıda alternatif sandviç kompozit yapı biçimi ile farklı yüzey ve çekirdek malzemeler birleştirilebilir.
💡
Sonuç & Katkı:Bu çalışma kapsamında mukavemet ve darbe absorbsiyonu açısından sandviç yapılarda kullanılan oksetik yapıların arasındaki mesafenin yapının kalınlığından daha önemli bir parametre olduğu ortaya konulmuştur.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:sandviç kompozit · 3 boyutlu eklemeli imalat · mekanik özellikler

Özet

Sandviç kompozitler, farklı malzeme kombinasyonları ile birleştirilerek özel uygulamalar için oluşturulabilen optimum malzeme tasarımlarıdır. Çok sayıda alternatif sandviç kompozit yapı biçimi ile farklı yüzey ve çekirdek malzemeler birleştirilebilir. Bu çalışmada; özellikle otomotiv tampon uygulamalarına yönelik olarak geliştirilen sandviç kompozit malzeme, naylon Poli-amid 12 (PA12) polimer malzemesinden oluşan çekirdek ile cam fiber takviyeli Polipropilen (GFRPP) alt – üst yüzeylerin bir araya getirilmesi ile elde edilmiştir. Malzemelerin önemli bir özelliği olan Poisson oranı; bir malzemenin kuvvet uygulandığı yöndeki şekil değiştirme miktarı ile aksi yöndeki şekil değiştirme miktarı arasındaki bağıntıyı verir. Poisson oranı birçok malzemede pozitif iken bazı malzemelerde ise negatiftir. Poisson oranı negatif olan bu malzemelere "oksetik malzeme" denir. Üretilen sandviç kompozitte negatif Poisson oranına sahip olan oksetik özellikteki çekirdek, üç boyutlu yazıcılardan birisi olan Fused Deposition Modelling (FDM) ile üretilmiştir. Girintili bal peteği geometrisi sayesinde üstün esneme özellikleri beklenmektedir. Bu amaçla; iki farklı kalınlıkta üretilen çekirdek geometrisine sahip olan sandviç kompozit malzemeler üç nokta eğme testlerine tabi tutulmuştur. Bu çalışma kapsamında mukavemet ve darbe absorbsiyonu açısından sandviç yapılarda kullanılan oksetik yapıların arasındaki mesafenin yapının kalınlığından daha önemli bir parametre olduğu ortaya konulmuştur.

Abstract

Sandwich composites are optimum material designs that can be created for special applications by combining with different material combinations. Different surface and core materials can be combined with a number of alternative sandwich composite structures. In this study, the sandwich composite material, developed especially for automotive bumper applications, is obtained by combining the core consisting of nylon Polyamide 12 (PA12) polymer material and glass fiber reinforced Polypropylene (GFRPP) lower - upper surfaces. Poisson's ratio, which is an important property of materials; It gives the relationship between the amount of strain of a material in the direction in which the force is applied and the amount of strain in the opposite direction. Poisson's ratio is positive in many materials and negative in some materials. These materials with a negative Poisson ratio are called "oxetic materials". The core with negative Poisson ratio in the produced sandwich composite was produced with Fused Deposition Modeling (FDM), one of the three-dimensional printers. Superior flexing properties are expected thanks to the re-entrant honeycomb geometry. For this purpose, sandwich composite materials with core geometry produced in two different thicknesses were subjected to three-point bending tests. Within the scope of this study, it has been revealed that the distance between the oxetic structures used in sandwich structures is a more important parameter than the thickness of the structure in terms of strength and impact absorption.

🔖

Bu Makaleye Atıf Yap

KABOĞLU, C. (2022). Statik Yükleme Altında Oksetik İç Yapılı Sandviç Kompozitlerin İncelenmesi. El-Cezeri, Cilt: 9 - Sayı: 1, 350–359. https://ajindex.com/articles/393355

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Nasirzadeh R., Sabet A.R., "Study of foam density variations in composite sandwich panels under high velocity impact loading", International Journal of Impact Engineering, 2014, 63: 129-139
  2. Rajaneesh A., Sridhar I., Rajendran S., "Relative performance of metal and polymeric foam sandwich plates under low velocity impact", International Journal of Impact Engineering, 2014, 65: 126-136
  3. Ashwill T.D., Paquette J.A., "Composite Materials For Innovative Wind Turbine Blades", Sandia National Lab.(SNL-NM), Albuquerque, United States, (2008)
  4. Mishnaevsky Jr L., Favorsky O., " Composite materials in wind energy technology", Thermal to Mechanical Energy Conversion Engines and Requirements, EOLSS Publ. Oxford, UK, (2011)
  5. Steeves C.A., Fleck, N.A., "Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part I: analytical models and minimum weight design", International Journal of Mechanical Sciences, 2004, 46(4): 561-583
  6. Steeves C.A., Fleck, N.A., "Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part II: experimental investigation and numerical modelling", International Journal of Mechanical Sciences, 2004, 46(4): 585-608
  7. Abbadi A., Koutsawa Y., Carmasol A., Belouettar S., Azari Z., "Experimental and numerical characterization of honeycomb sandwich composite panels", Simulation Modelling Practice and Theory, 2009, 17(10): 1533-1547
  8. Juntikka R., Hallstrom S., "Shear characterization of sandwich core materials using four-point bending", Journal of Sandwich Structures & Materials, 2007, 9(1): 67-94
  9. Fathi A., Wolff-Fabris F., Altstädt V., Gätzi R., "An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options", Journal of Sandwich Structures & Materials, 2013, 15(5): 487-508
  10. Fathi A., Keller J.H., Altstädt V., "Full-field shear analyses of sandwich core materials using Digital Image Correlation (DIC)", Composites Part B: Engineering, 2015, 70: 156-166
  11. Kaboglu C., Pimenta S., Morris A., Dear, J.P., "The effect of different types of core material on the flexural behavior of sandwich composites for wind turbine blades", Journal of Thermal Engineering, 2017, 3(2): 1102-1109
  12. Battley M., Burman M., "Characterization of ductile core materials", Journal of Sandwich Structures & Materials, 2010, 12(2): 237-252
  13. Gupta N.,