Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightUzun eksen yönelimleri D-B yönündedir ve bu yönelimler KD-GB yönelimli süreksizlikler ile uyum göstermemektedir.
📌 3 Maddede Bu Makale
Özet
Bozdağ, Akdeniz bölgesinin Antalya bölümünde ve Denizli il sınırları içinde yer almaktadır. 78.6 km2 alana sahip çalışma alanı tektonik olarak doğudan Acıpayam, batıdan Barz fayı ve güneyden Beyağaç fayı ile sınırlandırılmış bir horst özelliğindedir. Kırıklı ve tabakalı yapıya sahip alanda lapya, dolin, uvala, paleo vadi ve flüvyo-karstik vadi şekilleri gelişmiştir. Çalışma alanının relief sistemlerini Alt-Orta Miyosen, Üst Miyosen, Pliyosen ve Pleistosen dönemlerine ait yüzeyler oluşturmaktadır. Sahanın düşük eğimli alanları plato yüzeyinde bulunan Alt-Orta Miyosen relief sistemlerine karşılık gelmektedir. Bu alanlar dolinlerin yoğun bir şekilde görüldüğü yerlerdir. Çalışma sahasını karst jeomorfolojisi açısından incelemek, tektonik ve jeomorfolojik gelişimini açıklamak, alanda bulunan dolinlerin morfometrik özelliklerini belirlemek çalışmanın amacını oluşturmaktır. 1/25.000 ölçekli topoğrafya haritalarından yararlanılarak 212 dolin tespit edilmiş ve bu dolinlerin kantitatif açıdan açıklanması amacıyla dolinlerin morfometrik özellikleri hesaplanmıştır. 1470 metre ile 2370 metre arasında dağılış gösteren dolinlerin ortalama yükseltisi 1996 metredir. Bu karstik şekiller düşük ve orta yoğunluk sınıfında bulunmaktadır. Dairesellik indisinin ortalama değeri 1,21 olan dolinler, dairesellik formunu kaybetmiştir. Dolinlerin, en fazla (94 dolin) dağılış gösterdiği eğim aralığı 15° ile 20° arasında orta eğimli alanlardır. Uzun eksen yönelimleri D-B yönündedir ve bu yönelimler KD-GB yönelimli süreksizlikler ile uyum göstermemektedir.
Abstract
Bozdağ is located in the Antalya part of the Mediterranean region and within the borders of Denizli province. The study area, which has an area of 78.6 km2, has a horst feature, tectonically bounded by the Acıpayam faults from the east, the Barz faults from the west, and the Beyağaç faults from the south. Lapies, doline, uvala, paleo valley and fluvio-karstic valley forms have developed in the area, which has a fractured and layered structure. The relief systems of the study area consist of surfaces belonging to the Lower-Middle Miocene, Upper Miocene, Pliocene and Pleistocene periods. The low sloping areas of the field correspond to the Lower-Middle Miocene relief systems on the plateau surface. These areas are places where dolines are seen intensely. The aim of the study is to examine the study area in terms of karst geomorphology, to explain its tectonic and geomorphological development, to determine the morphometric features of the dolines in the area. 212 dolines were determined by using the 1/25.000 scaled topography maps and the morphometric characteristics of these dolines were calculated in order to explain these dolines quantitatively. The average elevation of the dolines, which are distributed between 1470 meters and 2370 meters, is 1996 meters. These karst shapes are in low and medium density class. Dolines with an average value of 1.21 for the circularity index have lost their circularity form. Dolines are medium-sloping areas between 15° and 20° with a maximum distribution (94 dolines). The long axis orientations are in the E-W direction and these orientations are not consistent with the NE-SW directed discontinuities.